Page 8 of 150

5
Where to find it
Introduction
Where to find it
This Operator's Manual is designed to pro-
vide support information for you, the MCS
operator. Each chapter has its own guide
color to provide fast access to information.
At a glance
This chapter will give you an overview of all
MCS control elements and system compo-
nents. If you are operating MCS for the first
time or if you have rented or borrowed the
vehicle, this is the chapter you should read
first.
Audio
Here you will find detailed information on
how to use the radio, cassette player, sin-
gle CD player*, CD changer* and adjust
the audio system settings.
Telephone*
Here you can learn in detail about the
many functions of the telephone, how to
initiate an emergency call and use service
numbers.
Navigation*
This chapter provides detailed information
on the following topics:
Destination input
Route selection and calculation
Route guidance
Destination memory
Info Services* and system settings
This chapter provides information on how
to:
Request and display info services such
as news, weather, stocks and sports
Adjust MCS system settings.
Directories
The table of contents and index will help
you to quickly locate the information you
need.
Page 10 of 150

7 Introduction
Operating safety
Operating safety
WarningG
Any alterations made to electronic compo-
nents and the software can cause malfunc-
tions.
The radio, amplifier, CD player*, CD chang-
er*, and telephone* are interconnected.
When one of the components is not opera-
tional or has not been removed/replaced
properly, the function of other components
may be impaired.
This condition might seriously impair the op-
erating safety of your vehicle.
We recommend that you have any service
work on electronic components carried out
by an authorized Mercedes-Benz Center.
WarningG
In order to avoid distraction, which could
lead to an accident, system settings should
be entered with the vehicle at a standstill.
The driver should only operate the system
when traffic conditions permit.
Bear in mind that at a speed of just
30 mph (approximately 50 km/h), your car
is covering a distance of 50 feet (approxi-
mately 14 m) every second.
MCS supplies you with the information to
help you select your route more easily and
guide you conveniently and safely to your
destination. For safety reasons, we encour-
age the driver to stop the vehicle in a safe
place before answering or placing a call, or
consulting the MCS screen to read naviga-
tional maps, instructions, or downloaded in-
formation.
While the navigation system* provides di-
rectional assistance, the driver must remain
focused on safe driving behavior, including
attention to traffic and street signs, and
should utilize the system's audio cues while
driving.
The navigation system* does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. This al-
ways remains your personal responsibility
when you drive.DVD maps do not cover all ar-
eas nor all routes within an area.
Page 14 of 150

11 At a glance
MCS control unit
FunctionPage
1Switches the radio oper-
ation on30
2Color display
3Delete the last input, re-
turn to previous screen
4Press to:
Open and close the con-
trol panel
Cassette compartment
and CD/DVD slot are lo-
cated behind control
panel
40,
51
5Press to:
Switch the MCS on and
off
Turn to:
Adjust the volume of an
audio source, or naviga-
tion voice prompt during
active route guidance
announcement.
14
16
FunctionPage
6Radio operation:
Selecting a station
Saving stations manually
CD operation:
Selecting a track or CDs
Telephone:
Entering the unlock code
Entering the telephone
number
34
36
58, 59
72
74
7Joystick:
Activates equipment
functions and submenus
via menu fields
Pressing :
Confirms a selection
8Switches the navigation*
system on
Activates the navigation
menu90
FunctionPage
9Repeats current (last)
voice instruction
10Softkeys
11Ending a call73
12Accepting an incoming
call
Sending a call73
13Switches telephone* op-
eration on72
14Switches info service*
operation on138
15Switches CD operation
on (single CD player*,
CD changer*)56
16Switches tape operation
on44
Page 15 of 150
12 At a glance
MCS control unit
Main menu structure
Main radio display
1Active system/function display field
2Inserted cassette icon
3Inserted navigation DVD or audio CD
icon
4Inserted CD changer icon
5Telephone roaming indicator
6Telephone signal strength meter
7Selected station preset / CD
8Softkey menu Active system / function display field Display screen
System
Display
FM
AM, WB
CD
CHANGER
INFO SER-
VICE
PHONE
TAPE
Roaming in-
dicator
S
R
R (highlight-
ed)Meaning
FM radio band selected
AM radio band or Weather
Band WB selected
Single CD player selected
CD changer selected
Info service selected
Telephone selected
Tape selected
Signal in home network
Roaming
Roaming on non-home
type system
Page 21 of 150

18 At a glance
Quick reference MCS
Switching on
Press .
The main CD menu will be displayed.
CD playback will begin automatically
depending on the CD player selected.
Single CD player. The first track on
the CD is played.
CD changer. The first track on the
first CD detected in the magazine is
played.Inserting a CD into the CD drive and insert-
ing CDs in the CD changer (
page 51).
Track select
Push the joystick to / .
The beginning of the current track, the
previous track, or the next track will be
played.
Selecting a CD from the CD changer
Activate the CD changer.
Press one of the number keys.
Keys - select the corre-
sponding magazine slot of the
CD changer.
The message “Loading CD...” appears
on the display. Playback begins with
track 1.CD track scan
Press the softkey “SCAN”.
The tracks on the CD are played one af-
ter the other for 8 seconds each.
Press the highlighted softkey
“SCAN” to cancel the function.
Refer to (
page 48) “CD operation” for
additional information.
CD operation*
Page 52 of 150
49 Audio
CD operation
FunctionPage
1Switches CD operation
on (single CD player*,
CD changer*)56
2Color screen
3Press to:
Open and close the con-
trol panel
The CD slot is located
behind the control panel.
51
4Press to:
Switch the MCS on and
off
Turn to:
Adjust the volume
14
16
5Playing a CD (CD chang-
er)
Selecting a track58
5 9
6Joystick
: Track select for-
ward
: Track select re-
verse
: Music seek for-
ward
: Music seek re-
verse
59
59
60
60
7Softkeys
“II”: Pause
“RDM”: Random play
“RPT”: Repeat
“TIME”: Select time dis-
play
“ADJ”: Audio adjust-
ment
“SCAN”: Scan
62
61
61
62
63
60
FunctionPage
Page 53 of 150

50 Audio
CD operation
CD player locations
The single CD player* is located behind
the MCS control panel
You can play audio CDs or read data
from the navigation DVD.
The 6 disc CD changer*.
The status line in the main CD menu indi-
cates which component is being used for
CD playback.Tips on caring for your CDs
Only touch the CD on the sides.
Avoid touching the CD recording sur-
face with your fingers.
Clean the CD with a dry, lint-free cloth.
Wipe the CD in a straight line from the
center. Never wipe the CD in a circular
motion.
Do not use rubbing alcohol or solvents
to clean the CDs.
Do not expose the CDs to heat or direct
sunlight.
Do not write or put stickers on CD’s.
General information on CD mode
WarningG
The single CD player and CD changer are
Class 1 laser products. There is a danger of
invisible laser radiation if the cover is
opened or damaged.
Do not remove the cover. The single CD
player and the CD changer do not contain
any parts which can be serviced by the user.
For safety reasons, have any necessary ser-
vice work performed by an authorized Mer-
cedes-Benz center.
!
Use only CDs with a diameter of 12 cm;
do not use 8-cm CDs.
An 8-cm CD adapter may cause damage
to the CD changer and s
should not be
used.
Page 54 of 150

51 Audio
CD operation
Inserting or ejecting a CD (Single CD play-
er*)
Inserting
Press .
The control panel is lowered.
Insert the CD into the CD slot with the
label side up. The CD will automatically
be fed into the CD player.
The control panel closes automatically
after a few seconds.Ejecting
Press .
Press to eject the CD.
Press .
The control panel is raised. After the
CD has been ejected, the MCS will
switch to the last audio mode.
Inserting or ejecting a CD
i
If an audio CD is inserted, an audio CD
icon is displayed when in the radio
or tape mode.
i
If the control panel is in the down posi-
tion for more than 20 seconds, two suc-
cessive beeps will be heard.
This will continue at five second inter-
vals until the control panel is returned
to its normal position.
Press to return the control panel
to its closed position.
!
A lowered control panel can easily be
damaged. As soon as the CD is ejected,
close the control panel.
Do not place anything on the lowered
control panel.
i
If you do not remove an ejected CD, the
CD drive automatically retrieves it after
10 seconds.
The CD drive can read either
Navigation DVDs or
Audio CDs.