190 Info Services/System settingsSystem settingsYou can select the following languages
“Adopt from Instrument Cluster”
COMAND will use the same language
as is set in instrument cluster
“Deutsch”
“English” (metric)
Distance measured in km,
speed in km/h
“English” (imperial)
Distance measured in yards and miles,
speed in miles per hour (mph)
“Español”
“Français”
“Italiano”
“Nederlands”COMAND is equipped with an integrated
clock, which it shows in the main system
settings menu.
Automatically
COMAND automatically sets date and time
if the GPS time is received.
However, you can make the following ad-
justments:
Set the time in increments of 30 minu-
tes (
page 191)
Set the time by selecting a country and
the time zone (
page 192)Manually
You must always set the clock manually
(
page 195), if
COMAND does not receive a GPS time
the clock has been disconnected from
the vehicle battery
the dates of the change between sum-
mer and winter time are not available
Setting date and timeiThe clock displays e.g. the estimated
time of arrival at the destination during
route guidance.
199 Info Services/System settings
System settings
If the settings menu is displayed
Turn the right-hand rotary/push-button
v to highlight “Factory Settings” and
press to confirm.
An inquiry menu will appear. “Yes” is
highlighted.
Accepting the factory settings
Press the right-hand rotary/push-
button v.
A screen with the factory setting will
appear for 8 seconds.
The main system settings menu is reac-
tivated.The factory settings are:
Acknowledgement beep – on
Info beep – off
Language – adopt from instrument
cluster
Time display – 24 h
Date format –DD.MM (day, month)
If you do not wish to reset to factory
settings
Turn the right-hand rotary/push-button
v to highlight “No” and press to con-
firm.
The main system settings menu will ap-
pear.
Resetting all settings to the
factory settings
P82.85-9529-31US
SYS SettingsReset of all
system parameters to
factory settings?
Ye s
No
