2003 MERCEDES-BENZ C CLASS COUPE language

105
Controls in detail
Control system
Control system
The control system is activated as soon as
the key in the starter switch is turned to
position 1. The control system enables you
to

call up information about your vehicle


change vehicle settings
For example, you can use the control sys-
tem to find out when your vehicle is next
due for service, to set the language for
messages in the instrument cluster dis-
play, and much more.
The control system relays information to
the multifunction display.
Multifunction display
1 Main odometer
2 Trip odometer
3 Automatic transmission program mode
4 Current gear selector lever position
5 Digital clock
6 Outside temperature
iThe displays for the audio systems (ra-
dio, CD player, cassette player) will ap-
pear in English, regardless of the
language selected.
Warning!
G
A driver’s attention to the road and traffic
conditions must always be his /her primary
focus when driving.
For your safety and the safety of others, se-
lecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 13.5 m) every second.

115
Controls in detail
Control system
Resetting the functions of a submenu
For each submenu you can reset all the
functions to the factory settings.
Move to a function in the submenu.

Press the reset knob in the instrument
cluster for approximately three sec-
onds.
In the display you will see the request
to press the reset knob again to con-
firm.

Press the reset knob again.
All functions of the submenu will reset
to factory settings.
The table below shows what settings can
be changed within the various menus. De-
tailed instructions on making individual
settings can be found on the following pag-
es.
INSTRUMENT CLUSTER
LIGHTING
VEHICLE
CONVENIENCE
Set time (hours)
Set daytime running lamp mode
(USA only)
Set station selection mode
(radio)
Activate easy-entry/exit feature
Set time (minutes)
Set locator lighting
Set automatic locking
Set key dependency
Select time display mode
Exterior lamps delayed shut-off
Set parking position for exterior
rear view mirror
Select temperature display
mode
Interior lighting delayed shut-off
Select speedometer display
modeSelect languageSelect display (speed display or
outside temperature)

116 Controls in detailControl systemInstrument cluster submenu
Access the
INSTRUMENT CLUSTER
submenu
via the
SETTINGS
menu. Use the
INSTRU-
MENT CLUSTER
submenu to change the in-
strument cluster display settings. The
following functions are available: Set time (hours)

Move the selection marker with
the
æ
or
ç
button to the
IN-
STRUMENT CLUSTER
submenu.

Press button
j
or
k
repeatedly
until you see this message in the dis-
play:
TIME SETTINGS – HOURS
.
The selection marker is on the hour set-
ting.

Press
æ
or
ç
to set the hour. Set time (minutes)

Move the selection marker with
the
æ
or
ç
button to the
IN-
STRUMENT CLUSTER
submenu.

Press button
j
or
k
repeatedly
until you see this message in the dis-
play:
TIME SETTINGS – MINUTES
.
The selection marker is on the minute
setting.

Press
æ
or
ç
to set the minutes.
Function
Page
Set time (hours)
see
below
Set time (minutes)
see
below
Select time display mode
117
Select temperature display
mode
117
Select speedometer display
mode
117
Select language
118
Select display (speed display or
outside temperature)
118

118 Controls in detailControl systemSelecting language
Move the selection marker with
the
æ
or
ç
button to the
IN-
STRUMENT CLUSTER
submenu.

Press button
j
or
k
repeatedly
until you see this message in the dis-
play:
TEXT
.
The selection marker is on the current
setting.

Press
æ
or
ç
to select the lan-
guage to be used for the multifunction
display messages.
Available languages:


German


English


Italian


French


Spanish Selecting display (speed display or out-
side temperature)

Move the selection marker with
the
æ
or
ç
button to the
IN-
STRUMENT CLUSTER
submenu.

Press button
j
or
k
repeatedly
until you see this message in the dis-
play:
SELECT DISPLAY
.
The selection marker is on the current
setting.

Press
æ
or
ç
to select the dis-
play permanently shown in the multi-
function display.

165
Controls in detail
Audio system


SP: The tone level is set for
“Speech”, optimizing the sound for
spoken language.


AMB
: The tone level is set for “Ambi-
ence”, producing a three-dimen-
sional sound.


OFF
: The audio system sound selec-
tion is turned off.
Telephone* muting
If a telephone has been installed in the ve-
hicle, the radio will switch to telephone
mode when a call is received. The current
audio source is muted.
Radio mode
Selecting radio mode
Press the
b
button.
Selecting the band
You can select from among FM, AM or WB
frequency bands.
FM frequency band:
FM (ultra-short wave) 87.9......107.9 MHz
AM frequency bands:
MW (medium wave) 530......1710 KHz
WB (long wave) approx. 162 KHz Selecting FM band

Press the
FM function button.
FM appears in the upper right-hand cor-
ner of the display.
Selecting AM band

Press the
AM function button.
AM appears in the upper right-hand cor-
ner of the display.
Selecting a station
The following options are available for se-
lecting a station:


Direct frequency band input


Manual tuning


Automatic seek tuning


Scan tuning


Station buttons


Automatic station memory (Autostore)

342 IndexInflatingSpare tire 292
Information Button for Tele Aid* 206
Inside rear view mirror Adjusting 39
Antiglare 138
Installing Infant and child restraint systems 69
Towing eye bolt 302
Wiper blades 287
Instrument cluster 22, 102, 329 Cleaning 243
Coolant temperature gauge 102
Illumination 102
Lamps in 246–250
Multifunction display 105
Outside temperature indicator 104
Selecting language 118
Instruments and controls see Cockpit 20
Integrated remote control Canadian programming 211
Erasing memory 212
Hand-held transmitter 210
Operating 212
Rolling code programming 211 Interior lighting 100
Activating automatic control 100
Deactivating automatic control 100
Delayed shut-off 121
Manual operation 100
Interior storage spaces 195 Armrest 197
Cup holder 196
Glove box 195
Parcel net in front passenger footwell 198
Storage compartment in front of arm- rest 196
J
Jack 272
Jump starting 297
K
Key dependency memory Settings 124
Key positions in starter switch 31
Key, mechanical 274, 275
Key, SmartKey Battery check lamp 83
Changing the batteries 276
Checking the batteries 84 Factory setting 83
Global locking 83
Global unlocking 83
Loss of 84
Positions in starter switch 31
Remote controls 82
Restoring to factory setting 83
Selective setting 83
Starting the engine 45
Turning off the engine 53
Unlocking with 30
Keys 82
Kickdown 137, 329
Kilometers/miles in speedometer 117
Km/h or mph in speedometer 117
L
Labels, identification 308
Lamp bulbs, exterior 280
Lamps, exterior Front 280
Light sensor 263
Messages in display 264–267
Rear 281

343
Index
Lamps, indicator and warning
ABS 247
Airbag Off 61
Battery (SmartKey) 83
Brakes 249
CHECK ENGINE 250
Coolant 257
Engine diagnostics 250
ESP 246
Fuel reserve 250
Instrument cluster 246–250
Seat belts 250
Service indicator 238
SRS 57
Turn signals 23
Language Multifunction display 118
Setting 118
LATCH child seat mounts 70 Folding back 70
Layout of poly-V-belt drive 309
Leather upholstery Cleaning 244
License plate lamps Messages in display 266
Replacing bulbs 281, 286 Light alloy wheels
Cleaning 243
Technical data 311
Light sensor 263
Lighter see Cigarette lighter 199
Lighting 96 Automatic headlamp mode 97
Combination switch 99
Daytime running lamp mode 98
Exterior lamp switch 96
Front fog lamps 98
High beam flasher 99
High beams 99
Instrument cluster illumination 102
Interior 100
Locator lighting 98
Low beam 96
Manual headlamp mode 97
Night security illumination 98
Parking lamps 96
Rear fog lamp 98
Settings (control system) 119
Trunk 101
Limiting the gear range 134
Limp Home Mode 137 Loading 192
Instructions 194
Roof rack 192
Split rear bench seat 192
Locator lighting 98 Setting 120
Lock button 329
Lock buttons 329
Locking 51, 82 Fuel filler flap 224
Global, SmartKey 83
Vehicle in an emergency 275
Loss of keys 84
Loss of Service and Warranty Information Booklet 307
Low beam headlamps Messages in display 264
Replacing bulbs 280, 282
Lowering Vehicle 291
Lubricants Technical data 317
Luggage cover 192
M
Main dimensions 315
Maintenance 238

344 IndexMalfunctionDisplaying 113
Malfunction memory 112 Calling up 112
Manual headlamp mode 97
Manual operations Fuel filler flap 277
Interior lighting control 100
Locking the vehicle 275
Sliding/pop-up roof 278
Unlocking the driver’s door 274
Unlocking the trunk lid 275
Unlocking transmission selector lever 277
Manual seat Adjusting 33
Adjusting backrest tilt 33
Adjusting head restraint height 33
Adjusting head restraint tilt 34
Adjusting seat cushion tilt 33
Adjusting seat height 33
Front seat head restraints 90
Seat fore and aft adjustment 33
Manual transmission 130 Shifting into reverse 131
Starting with 44 MAXCOOL maximum cooling 154
MB Tex upholstery
Cleaning 244
Mechanical key 274, 275
Memory function 93, 329 Recalling positions from memory 94
Storing exterior rear view mirror park-ing positions 95
Storing key dependent settings 94
Menus 106 AUDIO 110
Control system 329
In control system 108, 109
Malfunction memory 112
NAV 112
Settings menu 114
Standard display 110
Submenus 107
TEL* 126
Trip computer 125
Microphone Hands-free microphone 26
Miles/kilometers in speedometer Setting 117 Mirrors
Adjusting 39
Automatic antiglare for rear view mirror 138
Exterior rear view mirror 40
Exterior rear view mirror parking posi- tions 124
Inside rear view mirror 39
Storing exterior rear view mirror park- ing position 95
MON 225
MON (Motor Octane Number) 329
Mph or km/h in speedometer 117
Multifunction display 105, 329 Selecting language 118
Standard display 109
Multifunction display messages ABS 253
BAS 254
Battery 270
Brake fluid 256
Brake pads 256
Check engine 250
Coolant 258
Coolant level 257
Display 270