2003 MAZDA MODEL MPV engine

Quick Tips 2003 Mazda MPV page 20
page 1
Revised September 23, 2002
MAINTENANCE SCHEDULE
Maintenance notes:
Rotate tires every 7,500 miles
o r sooner if needed
Replace cabin air filter once a
year or every 12,000 miles
†
A.Change: Engine oil/replace filter
Lubricate: All locks and hinges
B.Inspect: Drive belts, fuel lines and
hoses, brake lines, hoses andcon-
nections, disc and drum brakes,
steering operationand linkages,
front suspension ball joints,
driveshaft dust boots, chassis and
body bolts and nuts, exhaust
system, heat shields, refrigerant
amount and compressor operation
Replace: Brake fluid
C.Change: Engine coolant
D.Inspect: PVC valve, hoses and
tubes for emission system
E.Clean: Air filter
F.Replace: Air filterThis Quick Tips
®guide is provided
by Mazda North American
Operations to make your Mazda
ownership experience more
convenient. It is not intended to
replace your Owner’s Manual.
If you have any questions about
your vehicle, you are invited to
contact your local dealer.
Or if you need additional help,
feel free to call our
Customer Assistance Center
at 1-800-222-5500
Monday through Friday,
9 a.m.- 4 :45 p.m., Pacific
9 a.m.-5:45 p.m., Eastern/Central
Unique driving conditions*
Every 5,000 miles change oil/filter,
inspect coolant level, lights, brake/
clutch fluid, tire pressure/wear,
power steering fluid, locks/hinges
and washer fluidNORMAL SERVICE INTERVALS
7,500 miles
15,000 miles
22,500 miles
30,000 miles
37,500 miles
45,000 miles
52,500 miles
60,000 miles
67,500 miles
75,000 miles
82,500 miles
90,000 miles
A B A A C A A B D E A
A C A F A B A E A
A
©2002 Calcar, Quick Tips®is a trademark
of Calcar, made in USA 8/02 35.148M GL
Mazda North American Operations reserves
the right to change product specifications at
any time without incurring obligations.
*Special operating conditions†See Owner’s Manual
2003
Reference
Guide for
Controls and
Functions
Quick Tips®
®
MAZDA MPV MAZDA MPV

DRIVER’S VIEW
Always check the Owner’s Manual for more operating information and safety features
1. Power window switches*,
see Switches/Locks
2. Power door locks*,
see Switches/Locks
3. Fog lights*
Press on/off; functions only
with headlight low beams on
4. Air vents
5. Traction control
system*
6. Turn signal/lighting
control lever,
see Driver Controls
7. Power outside mirror
switch*, see Switches/Locks
8. Horn and driver’s air bag
9. Gearshift lever,
see Transaxle10. Hazard warning switch
Push on/off
11. Audio system,
see Audio Systems
12. Rear window defroster
switch
13. Lighter
14. Climate control panel,
see Climate Controls
15. Cup holder/ashtray
16. Front console
17. Parking brake lever
18. Wiper/washer lever,
see Driver Controls
19. Cruise control lever*,
see Driver Controls20. Tilt steering-wheel lever
Pull lever down, position
wheel; push lever up
21. Audio control switches,
see Driver Controls
22. Instrument panel
lighting
Turn thumb-wheel up/down
to increase/decrease intensity
23. Power sliding door
switches, see Power
Sliding Doors
24. Hood release handle
25. Fuse panel
26. Remote fuel door release
Driver’s
View
Quick Tips 2003 Mazda MPV page 2
page 3
Revised September 23, 2002
Key
Operates ignition and
all locks
Tip: Use key number
plate to purchase a new
key; store in safe place
separate from vehicle
Immobilizer system*
Prevents engine from
starting unless coded
key used; see Owner’s
Manual
Remote Keyless
Entry System*,
see Locks
25
1
14
1312
15
16
1726
24
V
O
LMODE
181920212223
23456749841110
*Denotes optional equipment

INSTRUMENT CLUSTER
Always check the Owner’s Manual for more operating information and safety features
WARNING LIGHTS
9. Charging system
warning light
Dealer inspection required
10. Low engine oil
pressure warning light
Stop vehicle and turn off
engine; check oil level
11. Cruise control*
12. TCS Traction Control
System*
Light flashes when in use; dealer
inspection required if light
remains on
13. Traction Control
System* off
System turned off manually
or malfunctioning; dealer
inspection required14. Air bag readiness
Air bag malfunction, dealer
inspection required
15. Turn signals/hazard
warning on
16. High beams on
17. Door ajar
18. Immobilizer system/
security light*
19. Check engine
Possible faulty emission control,
dealer inspection required, or
fuel filler cap not tight
20. Brake system
Parking brake on/low
fluid level21. Anti-lock Brake System
(ABS)*
ABS malfunction, normal brakes
only, dealer inspection required
22. Overdrive off indicator,
see Transaxle
Lights when the overdrive
button is in the off position
23. Always fasten
safety belts
Instrument
Cluster
Instrument
Cluster
Quick Tips 2003 Mazda MPV page 4
page 5
Revised September 23, 2002
x1000r/min
5-SPEED AT
0 1 234
5
6
7
8
H
CF
E
10923117228
15154121617
14
1312
0 10 20 30405060
70
80
90
100
110
120
200
0 20 406080100
120
140
160
180mph
km/h
3
TRIP
ODOA88888.8BPRND32
65
18
19
20
21
*Denotes optional equipment
GAUGES
1. Coolant temperature
gauge
If above normal range, stop
vehicle and turn off engine;
check coolant level when safe2. Fuel gauge
19.8-gallon/75-liter tank
3. Speedometer
4. Tachometer
5. Gear indicator
6. Odometer/trip meter7. Odometer/trip meter
select button
Press to select odometer,
trip A or trip B
Press and hold to reset
selected trip odometer
8. Low fuel level

TRANSAXLE
Always check the Owner’s Manual for more operating information and safety features
Transaxle
Climate
Controls
Quick Tips 2003 Mazda MPV page 14
page 15
Revised September 23, 2002
1. Temperature control
Rotate knob to blue for
cool, red for warm
Control positions for
maximum defrost
Fan to maximum, temperature
to maximum hot, air flow
selector knob to
2. Air Conditioning
Press on/off
3. Fan control
Rotate knob4. Rear window defrost
Press on/off, shuts off with
ignition or cycles off/on
after 20 minutes
5. Air flow selections
= air to dash
= air to dash and floor
= air to floor
= air to floor and windshield
= air to windshield
6. Air intake selection
switch
Press for cooling
with inside/outside air
7. Rear air conditioning
switch*
0= fan off
REAR = select fan speed
from rear control
1= low
2= medium
3= high
Tips: To help prevent windshield
fogging in humid weather, select
before starting engine
To prevent moisture buildup,
never drive with system off
Objects placed under the
front seats may interfere with
air flow to the rear
/
Automatic transaxle
P = Park
To move gearshift from Park:
Press firmly on brake pedal
R = Reverse
N = Neutral
No gear engaged
D (Overdrive)
For normal driving: Shifts through
four forward gears automatically
Tip: Torque converter lock-up
improves fuel economy and
can feel like an additional gear
D (Overdrive Off)
Press overdrive off switch (1) to
disengage/engage overdrive;
indicator light on instrument
panel will illuminate; shifts
through three forward gears
automaticallyProvides extra power and increased
engine braking; stops 3rd-4th
gear cycling in stop/go driving
3 = Third
Provides extra power and
increased engine braking
Use to reduce wheel spin when
starting on slippery surfaces
2 = Second
Use for engine braking when
3rd is not sufficient
0
0123REAR
12
3
4A/C
1342
6
7
5
*Denotes optional equipment
1
TRIP
ODOA88888.8BPRND320 10
120
mph

UNDER HOOD
Always check the Owner’s Manual for more operating information and safety features
Under Hood
Quick Tips 2003 Mazda MPV page 18
page 19
Revised September 23, 2002
1. Power steering fluid
reservoir
Check with engine off; fill to
MAX mark
2. Engine coolant reservoir
Level should be between F and
L lines when cold
WARNING: Never remove
coolant reserve tank cap
while engine is running or
hot; you could get burned
Break-in period
First 600 miles: Avoid heavy
braking and acceleration; drive at
varying road and engine speeds
Tip: Follow same procedures
with overhauled engine or
when brakes are replaced
Anti-lock Brake System (ABS)*
When brake pedal is pressed, ABS
automatically reduces hydraulic
pressure to any wheel on the
verge of locking up
You may feel a slight pulsing
of the brake pedal and hear a
clicking noise; this tells you the
ABS is functioning properly;
increase pressure on pedal
for maximum braking
Tips: Maintain constant
pressure on the brake pedal
Do not pump the brakesTire economy and tips
Check pressure at least monthly
when tires are cold
Maintain correct front-end
alignment and tire balance; rotate
tires at 7,500-mile intervals; see
Owner’s Manual for rotation chart
Tire pressure
Decal on the edge of the
driver’s door provides tire
pressure information
Tire chains*
†Tire chains can damage aluminum
wheels; use on steel wheels only
Tips: Use only SAE class “S”
chains, install only on front
tires; install as tightly as
possible and retighten
after driving 1/4 -1/2 miles;
chains may affect handling
Never exceed 30 mph with
tire chains3. Automatic transaxle
fluid dipstick
Check with engine on at
operating temperature;
fluid level should be within
v-notches on dipstick
4. Brake fluid reservoir
Level should be kept at the
MAX mark on reservoir; fill
with DOT 3 fluid from a
sealed container
Traction Control System*
Automatically applies and releases
brakes to prevent excessive wheel
spin at all speeds, especially when
accelerating on slippery surfaces5. Air filter
6. Power distribution box
(fuses and relays)
7. Battery
8. Hood support rod
9. Hood latch
Pull hood latch up, open hood
10. Engine oil filler cap
SAE 5W-20 recommended for
all temperatures
11. Engine oil dipstick
Check with engine off and at
operating temperature; do not
fill above MAX line
12. Windshield washer
reservoir
Fill with windshield
washer fluid
6
5
1279811
1 2
43
10
3.0-liter 24V V6
Gasoline
Unleaded
regular
87-octane
minimum
19.8-gallon/
75-liter tank
*Denotes optional equipment†See Owner’s Manual