Page 27 of 377

KEYS AND DOORS
13
When starting the engine, do not use the key in
proximity  with other transponder keys (including the
flat  key and keys of other vehicles), and do not press
other key plates against the key grip.  Doing so may
prevent the engine from starting, or may cause the
engine to stop soon after it starts.  If this happens,
remove the key once and then insert it again after
taking off other transponder keys (including the flat
key and keys of other vehicles) from the ring or while
gripping or covering them with your hand to start the
engine. Do not bend the key grip or flat key.
 Do not cover the key grip or  flat key with any material
that cuts off electromagnetic waves.
 Do not knock the key or flat key hard against other
objects.
 Do not leave the key or flat key exposed to high
temperatures for a long period, such as on the
dashboard and hood under the direct sunlight.
 Do not put the key or flat key in water or wash it in an
ultrasonic washer.
 Do not use the key or flat key with electromagnetic
materials. 
     
        
        Page 28 of 377

KEYS AND DOORS
14
ENGINE IMMOBILISER SYSTEM
The engine immobiliser system is a theft prevention
system.  When you insert the key in the ignition switch, the
transponder chip in the key’s head transmits an electronic
code to the vehicle.  The engine will start, only when the
electronic code in the chip corresponds to the registered
ID code for the vehicle.
The system is automatically set when the key is removed from
the ignition switch.  At this time, the security indicator light
flashes.  When you insert the key in the ignition switch, the
security indicator light goes out and the system is canceled
automatically, which enables the engine to start.For your Lexus dealer to make you a new key with built
−in
transponder chip, your dealer will need your key number and
master key.  However, there is a limit to the number of
additional keys your Lexus dealer can make for you.
If you make your own duplicate key, you will not be able
to cancel the system or start the engine.
For vehicles sold in U.S.A.
FCC ID: MOZRI 16BTY B MADE IN JAPAN
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)  This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
CAUTION
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment. 
     
        
        Page 29 of 377
KEYS AND DOORS
15
For vehicles sold in Canada
This device complies with RSS− 210 of Industry
Canada.
Operation is subject to the following two conditions: (1)
This device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation of the
device.
WIRELESS REMOTE CONTROL
 1 Locking the doors and sounding an alarm
 2Indicator light
 3Unlocking the trunk lid
 4Unlocking the doors
When you operate any button on the key, push it slowly and
surely.  At this time, the indicator light on the key grip flashes
once.
The operational range of the wireless remote control is
approximately 1 meter (3 ft.).  The effective range may vary
with different conditions.  To activate the wireless remote
control  without fail, do it approximately 1 meter (3 ft.) from your
Lexus. 
     
        
        Page 30 of 377

KEYS AND DOORS
16In the following cases, th
e battery in the key may be
discharged.  If this is a case, replace it using a special
screwdriver.
 The remote control does not work.
 The operational range of wireless remote control becomes
extremely short.
 The indicator light on the key is dimmed or does not come
on.
For the replacement  of the battery, see “Replacing the battery”
on page 20.   You can also have the battery of the key replaced
by your Lexus dealer.
If you lose the wireless key , contact your Lexus dealer as soon
as possible to avoid the possibility of theft, or an accident.  (See
“If you lose your keys or lock yourself out” on page 285.)
You can use up to 4  wireless remote control keys for the same
vehicle.  Contact your Lexus dealer for detailed information.
The wireless remote control key is an electronic
component.  Observe the following instructions in order
not to cause damage to the key.
 Do not leave the wireless remote control key on places
where the temperature becomes high such as on the
dashboard.
 Do not disassemble it.
 Avoid knocking it hard against other objects or dropping it.
 Avoid putting it in water.
Locking/Unlocking the doors
When you push the “LOCK” button on the key briefly, all
the doors can be locked from outside the vehicle.
At this time, one beep sounds and the turn signal lights flash
once.*  However, when you push the “LOCK” button with any
door not closed securely,  the buzzer sounds for 10 seconds.**
To stop the buzzer, close all the doors securely or push the
“UNLOCK” button.  If the key is in the ignition switch, locking
cannot be done.
Make  sure all the doors are locked when you leave the vehicle.
Push the “LOCK” button once again.
NOTE:
*  The turn signal lights can be set not to flash and the beep
volume can be changed.
** The buzzer can be set not to sound if a door is not closed
securely.
Ask your Lexus dealer for details.
NOTICE
Do not push the “LOCK” button any longer than 2 to 3
seconds.  Pushing the button longer activates an alarm.
For details, see page 18. 
     
        
        Page 31 of 377

KEYS AND DOORS
17
When you push the “UNLOCK” button, the driver’s door
is unlocked.  Pushing that button once again within 3
seconds from the first push, all other doors are also
unlocked.*
NOTE:
* The 2 step unlocking function can be changed.
Ask your Lexus dealer for details.
At this time, two beeps sound and the turn signal lights flash
twice.*  Together with the activation of unlocking, the interior
light comes on for 15 seconds if the interior light switch is in
“DOOR” position.**  However, this  function does not work
when the ignition key is in the “ACC” or “ON” position.  For\
further  information, see “Illuminated entry system” on  page 66.
You have 30 seconds to open a door after using the wireless
remote unlock feature.***  If a door is not opened by then, all
the doors will be automatically locked again.
Even if the “LOCK” or “UNLOCK” button is kept pressed in, the
locking or unlocking operation is not repeated.  Release the
button and then push again. NOTE:
*  The turn signal lights can be set not to flash and the beep
volume can be changed.
** The duration of lighting can be changed
*** The time before automatic re locking can be changed.
Ask your Lexus dealer for details.
 1 Off   2Louder
When  you push any button on the key, the vehicle sounds one
beep  when the doors are locked by remote control, and sounds
two beeps when the doors are unlocked.
You can adjust the beep loudness with the knob under the
instrument panel.  Turning the knob clockwise increases the
volume and turning it counterclockwise until it stops turns the
buzzer off. 
     
        
        Page 36 of 377
KEYS AND DOORS
225. Install the lid with the 2 screws.
6. Install the module into the key frame and secure the cover
with the screw.
7. When pushing any button on the wireless key, make sure
the indicator light comes on.
DOORS
Locking with key
 1
Lock   2Unlock
Turn the key towards the front of the vehicle to lock and
towards the back to unlock.
The doors lock and unlock simultaneously with the driver’s
door.  Turning the key once will unlock the driver’s door and
twice in succession will unlock all doors simultaneously.* NOTE:
* The 2 step unlocking function can be changed.
Ask your Lexus dealer for details.
If a wrong key is used, the key cylinder rotates freely to isolate
inside  mechanism.  So, door locking is protected from thieves.
The windows and moon roof can be opened from outside the
vehicle using the key.  For details, see page 42 and page 91. 
     
        
        Page 41 of 377
SECTION   1 – 2
27
INSTRUMENTS AND CONTROLS
Switches
Headlight switch (U.S.A.)28
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Headlight switch (Canada) 30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Headlight dimmer and turn signal switch  33
. . . . . . . . . . . . . . . . . . . . . 
Fog light switch 34
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . 
Windshield wiper and washer switch 34
. . . . . . . . . . . . . . . . . . . . . . . . . 
Rear window and outside rear view mirror
defogger switch 39
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . 
Power window switches 40
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Emergency flasher switch 43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Seat heater switches 44
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 .  
     
        
        Page 42 of 377

SWITCHES
28
HEADLIGHT SWITCH(U.S.A.)
“AUTO” position
The headlights and all other lights automatically turn on
depending on the darkness of the  surroundings when the
ignition key is in the “ON” position.*
NOTE:
* The sensitivity of the automatic light control sensor can be
changed.
Ask your Lexus dealer for details.
To turn on the lights manually, twist the knob on the end
of the lever.
First clickstop:  Only the parking, tail, license plate, side
marker and instrument panel lights turn on.
Second clickstop:  Headlights also turn on. When 
the headlights are on, the headlight indicator lights up in
the instrument cluster.
With  the knob in the  “AUTO” position, there may be a  case
that  the headlights do not turn on immediately, even when
the vehicle enters a dark place such as a tunnel or parking
lot according to lighting conditions.  In this case, we
recommend  you to twist the knob manually to the second
clickstop to turn on the headlights immediately.
When the headlight switch is turned to the first or second
clickstop, the brightness of the instrument cluster will be
reduced slightly unless the instrument panel light control dial
is turned fully up.
“DRL OFF” position
The daytime running light (DRL) system does not work
when the knob is set in this position.
For details, see the following “Daytime Running Light (DRL)
System”.