2003 JEEP GRAND CHEROKEE power distribution

[x] Cancel search: power distribution

Page 892 of 2199

JEEP GRAND CHEROKEE 2003 WJ / 2.G Workshop Manual 8W-42 AIR CONDITIONING-HEATER
Component Page
A/C Compressor Clutch.............. 8W-42-3, 4
A/C Compressor Clutch Relay......... 8W-42-3, 4
A/C Pressure Transducer........ 8W-42-11, 12, 13
Auto Shut D

Page 1000 of 2199

JEEP GRAND CHEROKEE 2003 WJ / 2.G Workshop Manual 8W-60 POWER WINDOWS
Component Page
Body Control Module............... 8W-60-2, 3
Diagnostic Junction Port............. 8W-60-2, 3
Driver Door Module............ 8W-60-2, 3, 4, 5
Driver Front Power Win

Page 1186 of 2199

JEEP GRAND CHEROKEE 2003 WJ / 2.G Workshop Manual CONNECTOR NAME/
NUMBERCOLOR LOCATION FIG.
Trailer Tow Brake Lamp Relay BK Left Quarter Panel N/S
Trailer Tow Circuit Breaker BK Left Quarter Panel N/S
Trailer Tow Connector BK In Rear Bumper 39
Traile

Page 1187 of 2199

JEEP GRAND CHEROKEE 2003 WJ / 2.G Workshop Manual SPLICES
SPLICE
NUMBERLOCATION FIG.
S100 Near T/O for Power Distribution Center Eyelet 2
S102 (4.0L) Near T/O for G103 10, 11
102 (4.7L) Near T/O for Fuel Injector No. 1 13
S102 (Diesel) Near T/O for C

Page 1188 of 2199

JEEP GRAND CHEROKEE 2003 WJ / 2.G Workshop Manual SPLICE
NUMBERLOCATION FIG.
S122 (4.0L) Near T/O for G103 10, 11
S122 (4.7L) LHD Near T/O for Input Speed Sensor 15
S122 (4.7L) RHD Near T/O for Powertrain Control Module 16
S122 (Diesel) Near T/O for

Page 1226 of 2199

JEEP GRAND CHEROKEE 2003 WJ / 2.G Workshop Manual 8W-97 POWER DISTRIBUTION
TABLE OF CONTENTS
page page
POWER DISTRIBUTION
DESCRIPTION..........................1
OPERATION............................1
SPECIAL TOOLS
POWER DISTRIBUTION SYSTEMS.........2

Page 1227 of 2199

JEEP GRAND CHEROKEE 2003 WJ / 2.G Workshop Manual the same time, the power distribution system was
designed to provide ready access to these electrical
distribution points for the vehicle technician to use
when conducting diagnosis and repair of faul

Page 1228 of 2199

JEEP GRAND CHEROKEE 2003 WJ / 2.G Workshop Manual the junction block. If OK, go to Step 3. If not OK,
repair the open or short as required.
(3) Remove the cigar lighter knob and element
from the cigar lighter outlet shell. Check for continu-
ity betw