ÎÎ Î
Î Î Î
Specif ications
T echnical Inf ormation
250 Dimensions
Weights
Engine
Capacities
67.1 in (1,705 mm)
54.1 in (1,375 mm)
101.2 in (2,570 mm)
57.8 in (1,468 mm)
57.8 in (1,468 mm)
3.39 x 3.39 in (86.0 x 86.0 mm) 121.9 cu-in (1,998 cm
)
9.8 : 1 13.2 US gal (50
)
1.32 US gal (5.0
)
164.2 in (4,170 mm)
Length
Width
Height
Wheelbase
Track
Gross vehicle weight ratingType
BorexStroke
Displacement
Compression ratio
Spark plugs See the certification label attached
to the driver’s doorjamb. Fuel tank
Engine
coolant
Engine oil Manual
transmission
fluid
Windshield
washer reservoir1.77 US gal (6.7
)
4.4 US qt (4.2
)
4.2 US qt (4.0)
5.6 US qt (5.3)
1.6 US qt (1.5)
1.8 US qt (1.7)
2.6 US qt (2.5
)
0.13 US gal (0.5
)
Including the coolant in the reserve tank and that remaining in the
engine.
Reserve tank capacity:
Water cooled 4-stroke DOHC
i-VTEC 4-cylinder gasoline engine 5.8 US qt (5.5
)
See spark plug maintenance
section page 183 .
FrontRear
Approx.
Change Manual
Total Manual
Change
Without filter
Total
ChangeTotal
1: 2: 3: On the U.S. model
On Canadian model 1
23
Including filter
Service Inf ormat ion Summary
Gasoline:Tire Pressure (measured cold):
5-speed Manual Transmission Fluid:
Fuel Tank Capacity:
Recommended Engine Oil:
Brake Fluid:Front:
Rear:
Unleaded gasoline, pump octane
number of 86 or higher.
13.2 US gal (50
)
Oil change capacity (including
filter): 4.4 US qt (4.2
) 33 psi (230 kPa , 2.3 kgf/cm
)
API Certified ‘‘For Gasoline
Engines’’ Oil, SAE 5W-20 viscosity
(see page ). Spare Tire:
60 psi (420 kPa , 4.2 kgf/cm
)
30 psi (210 kPa , 2.1 kgf/cm
)
Honda Manual Transmission
Fluid preferred, or an SAE 10W-30
or 10W-40 motor oil as a
temporary replacement (see page
).
Honda Heavy Duty Brake Fluid
DOT 3 preferred, or a DOT 3 or
DOT 4 brake fluid as a temporary
replacement (see page ). 1.6 US qt (1.5
)
Oil change capacity (including
differential): 144
167
177
