2003 HONDA ACCORD COUPE display

µ
Û
Ý
Select the CD changer by pressing
the CD/AUX button. You will see
‘‘CD’’ in the upper display. The
system will begin playing the last
selected disc in the CD changer. You
will see the disc and track numbers
displayed.
When that disc ends, the next disc in
the CD changer is loaded and played.
Af ter the last disc f inishes, the
system returns to disc 1.
Each time you press and release the
top of the SKIP bar, the system
skips forward to the beginning of the
next track. Press and release the
bottom toskipbackwardtothe
beginning of the current track. Press
it again to skip to the beginning of
the previous track. To move rapidly within a track, press
and hold the top or bottom of the
SKIP bar. You will hear a beep and
the system will continue to move
through the track. Press to
move forward, or to move
backward. Release the bar when the
system reaches the point you want.
To select a dif f erent disc, touch the
appropriate disc icon (1 6) or
press the upper side ( ) or the
lower side ( ) of the DISC bar next
to the audio display. If you select an
empty position in the CD changer,
the system will go into the loading
sequence (see page ).
You can use the SKIP bar while a
disc is playing to select passages and
change tracks. When you touch the TRACK SCAN
icon on the audio display or press the
SCAN button next to the display, the
f irst track of the current CD plays
f or about 10 seconds. You will see
TRACK SCAN in the display (or
SCAN in the upper display). To hear
the rest of the track, touch TRACK
SCAN or press SCAN button again,
within 10 seconds. If you don’t, the
system advances to the next track,
plays about 10 seconds of it, and
continues through the rest of the
tracks the same way.
197
CONT INUED
Operat ion
Audio System
Comf ort and Convenience Feat ures
Track Scan
199

When you touch the DISC SCAN
icon on the audio display, the f irst
track of the current CD plays for
about 10 seconds. You will see DISC
SCAN in the display (or D-SCAN in
the upper display). To hear the rest
of the CD, touch DISC SCAN again,
within 10 seconds. If you don’t, the
system advances to the next CD,
plays about 10 seconds of its f irst
track, and continues through the rest
of theCDsthesameway.When you touch the TRACK RPT
icon on the audio display, the system
continuously replays the current
track. As a reminder, you will see
TRACK REPEAT in the display (or
RPT in the upper display). To turn
this feature off, touch TRACK
REPEAT again.
When you touch the DISC RPT icon
on the audio display, the system
continuously replays the current CD.
As a reminder, you will see DISC
REPEAT in the display (or D-RPT in
the upper display). To turn this
feature off, touch Disc RPT again.When you touch the RANDOM icon
on the audio display, the system
plays the tracks of the current CD in
random order, rather than in the
order they were recorded. As a
reminder, you will see TRACK
RANDOM in the display (or RDM in
the upper display). To turn this
f eature of f , touch RANDOM again,
or select a dif f erent CD with one of
the disc icons.
Audio System
Comf ort and Convenience Feat ures
Disc Scan
Track Repeat
Disc Repeat Random Play
200

To remove the disc that is currently
playing, press the eject button. You
will see ‘‘EJEC’’ in the upper and
audio displays. When you remove
the disc f rom the slot, the system
automatically begins the load
sequence so you can load another
CD in that position. If you do not
load another CD, after 15 seconds,
the system selects the previous
mode (AM, FM1, or FM2).
If you do not remove the disc f rom
the slot, the system will reload the
disc af ter 15 seconds and put the CD
changer in pause mode. To begin
playing the disc, press the CD button.
To remove a different CD from the
changer,firstselectitwiththe
appropriate disc icon or the DISC bar.
When that CD begins playing, press
the eject button.
Removing CDs f rom t he Changer
Audio System
Comf ort and Convenience Feat ures202
CD SLOTDISC BAR
EJECT
BUTTON
CD
BUTTON

Indication
If you see an error indication in the
upper display while operating the CD
changer, f ind the cause in the chart
to the right. If you cannot clear the
error indication, take the car to your
Honda dealer. Solution
Cause
Press the CD eject button and pull out the CDs.
Check for an error indication. Insert the CDs
again. If the code does not disappear or the
CDs cannot be pulled out, consult your Honda
dealer.
Press the CD eject button and pull out the CDs.
Check for an error indication. Insert the CDs
again. If the code does not disappear or the
CDs cannot be pulled out, consult your Honda
dealer.
Will disappear when the temperature returns to
normal.
FOCUS Error
Mechanical Error
High Temperature
CD Changer Error Indications
Audio System
Comf ort and Convenience Feat ures204

Î
Î
The cassette system f eatures Dolby
noise reduction, automatic sensing of
chromium-dioxide (CrO ) tape, and
auto-reverse f or continuous play.
To operate the cassette player, the
ignition switch must be in
ACCESSORY(I) or ON(II). Make
sure the tape opening on the cassette
is f acing to the right, then insert the
cassette most of the way into the slot.
The system will pull it in the rest of
the way, and begin to play.
2
Dolby noise reduction manuf actured under
license from Dolby Laboratories Licensing Corpo-
ration. ‘‘DOLBY’’ and the double-D symbol are trademarks of Dolby Laboratories
Licensing Corporation.
Operating the Cassette Player
(Optional)
Audio System
Comf ort and Convenience Feat ures206
PWR/VOL
KNOB
CD/AUX
BUTTON
SEEK/SKIP
BAR
AM/FM
BUTTON
CH/DISC
BAR
RPT ICON NR ICON
PLAY/PROG
ICON TAPE DIRECTION INDICATOR
RPT INDICATOR
AUDIO
DISPLAY
BUTTON

ÛDolby noise reduction turns on when
you insert a cassette. If the tape was
not recorded with Dolby noise reduc-
tion, push the AUDIO DISPLAY
button to change to the audio display,
and turn it of f by touching the NR
icon on the display.
Noise reduction remains of f until you
turn it on by pressing the icon again.
When the system reaches the end of
the tape, it will automatically reverse
direction and play the other side. If
you want to remove the cassette
from the drive, press the eject button
on the cassette player. To switch to the radio or CD player
while a tape is playing, press the
AM/FM, or CD/AUX button. To
change back to the cassette player,
push the CD/AUX button.
The tape direction indicator will light
on the upper display to show you
which side of the cassette is playing.
The indicates the side you
inserted f acing upward is now
playing. If you want to play the other
side, push the AUDIO DISPLAY
button to change to the audio display,
and touch the PLAY/PROG icon.
If you turn the system of f while a
tape is playing, either with the PWR/
VOL knob or by turning of f the
ignition, the cassette will remain in
the drive. When you turn the system
back on, the cassette player will be in
pause mode. To begin playing, push
the AUDIO DISPLAY button to
change to the audio display, and
touch the PLAY/PROG icon.
Audio System
Comf ort and Convenience Feat ures207

µ
µ
Û
Ý
With a cassette playing, you can use
the FF, REW, SKIP, or REPEAT
f unction to f ind a desired program.
The Skip f unction allows
youtofindthebeginningof asong
or passage. To activate SKIP, press
the SEEK/SKIP bar. Press the side to advance to the
beginning of the next song or
passage, or the side to return to
the beginning of the current song or
passage. FF or REW will be shown in
the upper display as the tape moves.
When the system reaches the
beginning of the next song or
passage (FF), or the beginning of
thecurrentone(REW),itgoesback
to PLAY mode.
Fast Forward and Re-
wind move the tape rapidly. To re-
wind the tape, push the upper side
( ) of the CH DISC bar. You will
seeREWinthedisplay.Tofastfor-
ward the tape, push the lower side
( ) of the CH DISC bar. You will
see FF displayed. Press either side of
the CH DISC bar or touch the
PLAY/PROGiconintheaudio
display to take the system out of re-
wind or f ast f orward. When the sys-
tem reaches the end of the tape, it
reverses direction and begins to play.
T ape Search Functions
SK IP
FF/REW
Audio System
Comf ort and Convenience Feat ures208

µThe SKIP and REPEAT f unctions
use silent periods on the tape to f ind
the end of a song or passage. These
f eatures may not work to your
satisfaction if there is almost no gap
between selections, a high noise
level between selections, or a silent
period in the middle of a selection.
The Repeat f unction
continuously replays the current
song or passage. Press the AUDIO
DISPLAY button to change to the
audio display, and touch the RPT
icon in the display to activate it; you
will see RPT displayed in the upper
display as a reminder. When the
system reaches the end of the song
or passage currently playing, it will
automatically go into rewind. When
it senses the beginning of the same
song or passage, the system returns
to PLAY mode. It will continue to
repeat this same program until you
deactivate REPEAT by touching the
icon again. REPEAT
Audio System
Comf ort and Convenience Feat ures209