2003 FIAT BARCHETTA lock

95
DIRECTION REPEATERS fig. 18
To change the 12V-5W bulb:
1) Remove press-fit lens A, com-
plete with bulb holder and rubber pro-
tection.
2) Pull back the rubber protection
and remove the bulb holder from the
lens assembly.3) Remove bulb Bby pressing it in
slightly and turning it in an anti-clock-
wise direction.
4) Replace the bulb.
5)Fit the lens on the bulb holder un-
til you hear it click into place, then
reposition the rubber protection.
6) Then fit the whole assembly into
the housing in the bodywork, turning
it slightly to aid installation.REAR DIRECTION
INDICATORS fig. 19
To change the 12V-21W bulb:
1)Unscrew knob Aand remove the
cover.
2) Turn bulb-holder Bin an anti-
clockwise direction and remove it.
3)Remove bulb Cby pressing it in
slightly and turning it in an anti-clock-
wise direction.
fig. 18
P5S00698m
fig. 19
P5S00699m

96
TAIL- AND STOP LIGHTS
fig. 20
To change the 12V-5/21W bulb:
1) Unscrew knob Aand remove the
cover.
2) Turn bulb holder Bin an anti-
clockwise direction and remove it.
3) Remove bulb Cby pressing it in
slightly and turning it in an anti-clock-
wise direction.THIRD BRAKE LIGHT
Proceed as follows to replace a
12V-P21W bulb:
1) Open the tailgate.
2) Loosen the two screws A-fig. 21
fastening the internal cover.3) Turn the bulb holder B-fig. 22
anticlockwise by approximately 1/4
of a turn.
4) Pull out the bayonet fitted bulb C.
5) Refit by reversing the removal
sequence.
fig. 20
P5S00700m
fig. 22
P5S10030m
fig. 21
P5S10029m

97
REVERSING LIGHTS fig. 23
To change the 12V-21W bulb:
1)Undo screw Asecuring the lens
assembly.
2) Turn bulb holder Bin an anti-
clockwise direction and remove it.
3)Remove the bulb by pressing it in
slightly and turning it in an anti-clock-
wise direction.
4) When refitting the lens assembly,
first insert tab Cin its slot in the body
work and then fix it in place with
screw A.REAR FOGLIGHTS fig. 24
1)Undo screw Asecuring the lens
assembly.
2)Turn bulb holder Bin an anti-
clockwise direction and remove it.
3)Remove the bulb by pressing it in
slightly and turning it in an anti-clock-
wise direction.
4)When refitting the lens assembly,
first insert tab Cin its seat in the body
work and then fix it in place with
screw A.NUMBER PLATE LIGHTS fig. 25
To change the 12V-5W bulb
1) Undo screw Asecuring the lens
assembly.
2) Pull up lens weather-stripping B
and remove press-fit bulb C.
fig. 23
P5S00701m
fig. 24
P5S00702m
fig. 25
P5S00703m

102
15
10
40
10
10
20
15
10
50
10
10
10
30
10
15
10
10
10
Interior lights
Protected device Ampere Fuse number - Location
Ceiling light
Glove compartment light
Glove compartment light
Side/taillight warning light
Main beam headlight warning light
Fog light warning light
Direction indicator warning light
Hazard light warning light
Rear fog light warning light
Instrument panel light
Digital clock light
Cigar lighter light
Window winder light
Fog light/rear fog light switch light
Hazard light control light
Heater control light
Manual climate control system light
Electric mirror control light 12-fig. 30
14-fig. 30
5-fig. 33
6-fig. 30
2-fig. 30
fig. 31
13-fig. 30
14-fig. 30
6-fig. 33
6-fig. 30
6-fig. 30
6-fig. 30
fig. 31
6-fig. 30
13-fig. 30
7-fig. 30
7-fig. 30
6-fig. 30

103
50
15
30
50
40
15
20
15
60
30
20
40
40
30
20
20
15
30
30
30
30
Loads
Protected device Ampere Fuse number - Location
Ignition switch
Airbag
Fiat CODE
Fiat CODE
Door locking system
Door locking receiver
Door lock geared motors
Sound system power
ABS
Manual climate control system
Horn
Electric window winder system
Electric window winders
Electric window winder geared motors
Windscreen washer motor
Windscreen washer pump
Mirror adjustment device
Radiator fan (versions with heater)
Radiator fan (low speed) (versions with manual climate control system)
Radiator fan (high speed) (versions with manual climate control system)
Injection system 6-fig. 33
13-fig. 30
4-fig. 33
6-fig. 33
5-fig. 33
13-fig. 30
fig. 31
12-fig. 30
7-fig. 33
5-fig. 30
11-fig. 30
5-fig. 33
5-fig. 33
fig. 31
10-fig. 30
10-fig. 30
13-fig. 30
3-fig. 33
3-fig. 33
2-fig. 33
4-fig. 33

104
15
15
15
10
15
30
15
20
20
40
20
20
15
15
7.5
7.5
15
7.5
60
7.5
7.5
15
60
7.5
–
Protected device Ampere Fuse - number - Location
Instrument panel power
Digital clock power
Cigar lighter power
Hazard light repeater power
Hazard light repeater power
Window winder control unit power
Door locking receiver power
Door locking control unit power
Manual climate control system control unit power
Supplementary headlight relay power
Radiator fan relay
Manual climate control system compressor relay
Climate control system compressor relay energy
Phase variator solenoid valve
Radiator fan relay energy
Fuel pump relay energy
Lambda sensor
Cylinder position sensor
Interconnection control unit
Injection control unit
Injection control unit
Window winder control unit
Electronic alarm control unit
Fiat CODE control unit
Spare13-fig. 30
12-fig. 30
12-fig. 30
14-fig. 30
13-fig. 30
fig. 31
12-fig. 30
fig. 31
9-fig. 30
5-fig. 33
9-fig. 30
9-fig. 30
fig. 34
fig. 34
fig. 34
fig. 34
fig. 34
fig 34
1-fig. 33
fig. 34
fig. 34
13-fig. 30
1-fig. 33
fig. 34
15-fig. 30

107
WITH A SHOP JACK
Front end
The car may only be raised by plac-
ing the arm of the jack under the
transaxle. Position a wooden or rub-
ber block between them as shown in
fig. 35.Be very careful that the
arms of the jack do not
force on the bodywork or
the side trim. Adjust the jack
arms correctly and if necessary
insert a wooden or rubber block. WITH AN ARM-TYPE HOIST
The car must be raised by placing the
ends of the arms in the areas illus-
trated in fig. 36.
fig. 35
P5S00707m
fig. 36
P5S00708m

108
The tow ring supplied as an outfit to-
gether with the car is housed into the
tool compartment under the luggage
compartment coating carpet.
Front tow
To fit the tow ring fully screw down
the tow ring fig. 37into the thread-
ed pin.
Rear tow
To fit the tow ring proceed as fol-
lows:
– Take the tow ring from the tool
compartment.
IF THE CAR NEEDS TO BE TOWED
fig. 37
P5S00709m
fig. 38
P5S10058m
– Remove the small pressure fitted
cover A-fig. 38on the rear bumper.
Should the outfit flat tip screwdriver
be used for this operation, it is nec-
essary to protect the flat tip with a soft
cloth, to avoid possible damage to the
car.
– Fully screw down the tow ring on
the threaded pin.
Before screwing down the
ring accurately clean the
threaded pin. Before starting car
towing, make sure whether the ring
is fully screwed down.
WARNING
Do not start the engine
when towing the car.
WARNING
Before starting to tow,
turn the ignition key to
MAR and back to STOP again
without removing it. Removing the
key automatically engages the
steering lock resulting in the im-
possibility to steer the wheels.
When towing remember thatwith-
out the help of the engine brake
and power steering greater effort
is required on the pedal and steer-
ing wheel. Do not use flexible ca-
bles for towing and avoid jerks.
During towing operations make
sure that fastening the joint to the
car does not damage the compo-
nents in contact with it. When
towing the car, it is compulsory to
follow specific traffic regulations
concerning both the towing device
and behaviour on theroad.
WARNING