2003 CADILLAC CTS display

[x] Cancel search: display

lights gas type automatic transmission fluid check transmission fluid brake pads replacement run flat

Load previous 8 pages

Page 235 of 435

CADILLAC CTS 2003 1.G Owners Manual 3-14
PRESETS HOME/AWAY: This feature gives you the
ability to store two different kinds of station presets.
HOME can be used for stations available where you live
and AWAY can be for stations availabl

Page 236 of 435

CADILLAC CTS 2003 1.G Owners Manual 3-15
AUDIO EQUALIZER: This feature allows you to
choose bass, midrange and treble equalization settings.
To choose a equalization setting (EQ0 through EQ5),
perform the following steps:
1. Press the T

Page 237 of 435

CADILLAC CTS 2003 1.G Owners Manual 3-16
Using DSP
This feature is used to provide a choice of five different
listening experiences: DSP normal, talk, spacious, rear
seat and driver seat. DSP can be used while listening to
the radio, th

Page 238 of 435

CADILLAC CTS 2003 1.G Owners Manual 3-17
Using RDS
Your audio system is equipped with Radio Data Systems
(RDS). RDS features are available for use only on FM
stations that broadcast RDS information. Using this
system, the radio can:
1.

Page 239 of 435

CADILLAC CTS 2003 1.G Owners Manual 3-18
TA (Traffic Announcement): This feature allows the
radio to receive traffic announcements even with the
volume muted, or when a CD or cassette tape is playing.
When TA is on, the radio will searc

3-18
TA (Traffic Announcement): This feature allows the
radio to receive traffic announcements even with the
volume muted, or when a CD or cassette tape is playing.
When TA is on, the radio will search for another station
with TA if the current station is not TA capable. During
the search, TA will flash on the display. Once a TA
station is found, TA will appear on the display and the
traffic announcement will be played. If no station
broadcasting traffic announcements is found, No Traffic
will appear on the display.
While a traffic announcement plays, the radio uses a
special type of volume called TA volume. To increase or
to decrease TA volume, turn the volume knob. TA
volume can not be turned completely down or off. To
turn off TA volume and stop TA announcements, you
must turn TA off.
When a traffic announcement comes on the current radio
station or a related network station, you will hear it,
even if the volume is muted or a cassette tape or
compact disc is playing. If the radio tunes to a related
network station for a traffic announcement, it will return
to the original station when the announcement is
finished. If the cassette tape or compact disc player was
being used, the tape or compact disc will stay in the
player and resume play at the point where it stopped.To turn TA on or off, perform the following steps:
1. Press the TUNE/SEL knob to enter the main menu.
2. Turn the TUNE/SEL knob until TRAFFIC
ANNOUNCE appears on the display.
3. Press the TUNE/SEL knob to select ON or OFF.
An X will appear in the box when TA is selected on.
4. Press the BACK button to exit the display. To return
to the original display keep pressing the BACK
button or wait for the display to time out.
MSG (Message): If the current RDS station has a
message, MSG will appear on the display. If the whole
message does not appear on the display, parts of the
message will appear every three seconds until the
message is completed. Once the complete message has
been displayed, MSG will disappear from the display
until another new MSG is received.
If you would like to display the message, perform the
following steps:
1. Press the TUNE/SEL knob to enter the main menu.
2. Turn the TUNE/SEL knob until RECALL RDS
MESSAGE appears on the display.
3. Press the TUNE/SEL knob. The last message
displayed will be displayed again.

Page 240 of 435

CADILLAC CTS 2003 1.G Owners Manual 3-19
Activating PTY Stations
Program type (PTY) allows you to search for stations
with specific types of music. The selectable PTYs are
POP, EASY, TALK, CNTRY (Country), CLASS
(Classical), and JAZZ.
T

Page 241 of 435

CADILLAC CTS 2003 1.G Owners Manual 3-20
Playing a Cassette Tape
With the radio on, insert a cassette tape. The tape will
begin playing as soon as it is inserted. When one side of
your cassette tape is done playing, auto reverse plays t

3-20
Playing a Cassette Tape
With the radio on, insert a cassette tape. The tape will
begin playing as soon as it is inserted. When one side of
your cassette tape is done playing, auto reverse plays the
other side of your cassette tape. A cassette tape may be
loaded with the radio off but it will not start playing
until the radio is on.
While the tape is playing, use the volume knob and set
the tone and DSP just as you do for the radio. Other
controls may have different functions when a tape is
inserted. The display will show a tape symbol. TAPE
PLAY will appear on the display while a tape is
playing, with an arrow to indicate which side of the
tape is playing.
If an error appears on the display, see ªCassette Tape
Messagesº later in this section.
When a tape is inserted the tape functions will appear on
the display above the pushbuttons, in place of the preset
stations (if programmed). The following explains what
each pushbutton and the SEEK and SCAN buttons will
perform while a tape is playing:
F1 PREV (Previous): Your tape must have at least
three seconds of silence between each selection for
previous to work. Press this pushbutton to seek to the
previous selection on the tape.F2 NEXT: Your tape must have at least three seconds of
silence between each selection for next to work. Press
this pushbutton to seek to the next selection on the tape.
REV (Rewind): Press this pushbutton to rewind the
tape rapidly. The radio will play while the tape rewinds.
Press this pushbutton again to return to playing speed.
FWD (Fast Forward): Press this pushbutton to fast
forward to another part of the tape. The radio will play
while the tape advances. Press this pushbutton again to
return to playing speed.
F5 A
-B (Side): Press this pushbutton to play the other
side of the tape.
SEEK : Your tape must have at least three seconds
of silence between each selection for the SEEK arrows
to work. Press the up or the down arrow to seek to the
next or to the previous selection on the tape.
SCAN: Press this button to listen to selections for
a few seconds. The tape will go to a selection, play for
10 seconds, then go on to the next selection. Press this
button again to stop scanning.
(Eject): Press this button, located to the right of the
cassette tape slot to stop a tape when it is playing or to
eject a tape when it is not playing. Eject may be
activated with the radio off and/or the ignition off.

Page 242 of 435

CADILLAC CTS 2003 1.G Owners Manual 3-21
Cassette Tape Messages
If an error occurs while trying to play a cassette tape, it
could be that one of the following has occurred:
The cassette tape is tight and the cassette player
cannot turn

3-21
Cassette Tape Messages
If an error occurs while trying to play a cassette tape, it
could be that one of the following has occurred:
The cassette tape is tight and the cassette player
cannot turn the hubs of the tape. Hold the cassette
tape with the open end down and try turning the right
hub counterclockwise with a pencil. Flip the tape
over and repeat. If the hubs do not turn easily, your
cassette tape may be damaged and should not be
used in the player. Try a new tape to be sure your
player is working properly.
The cassette tape is broken. Check to see if your tape
is broken. Try a new tape.
CLEAN TAPE: If this message appears on the display,
the cassette tape player needs to be cleaned. It will still
play tapes, but you should clean it as soon as possible to
prevent damage to the tapes and player. See ªCare of
Your Cassette Tape Playerº in the Index.
If any error occurs repeatedly or if an error can't be
corrected, contact your dealer.Your cassette tape player automatically reduces
background noise. Dolby Noise Reduction is
manufactured under a license from Dolby Laboratories
Licensing Corporation. Dolby and the double
-D symbol
are trademarks of Dolby Laboratories Licensing
Corporation.
Auto CrO
2 allows the cassette tape player to adjust to
the type of cassette tape for clearer sound for CrO
2cassette tapes.
Using the Single Compact Disc Player
Insert a disc partway into the slot, label side up. The
player will pull it in. If the ignition and the radio are on
the disc will begin playing. The display will show a CD
symbol. CD and the track number will appear on the
display when a CD is playing. A compact disc may be
loaded with the radio off but it will not start playing
until the radio is on.
The integral CD player can play the smaller 8 cm
compact discs with a 12 cm adapter. Full
-size compact
discs and the smaller compact discs (with the 12 cm
adapter) are loaded in the same manner. See you dealer
for more information about the 12 cm adapter for using
8 cm discs.

Load next 8 pages

Page: < prev 1-10 ... 25-32 33-40 41-48 49-56 57-64 65-72 73-80 next >

clock setting radiator tire pressure fuel reserve radio adblue