2003 CADILLAC CTS battery

2-102
Vehicle Info (Information) Menu
(Navigation System)
To access the Vehicle Info menu using the Navigation
system, press the INFO button to the left of the screen.
You can also access this menu through the Setup menu.
See ªSetup Menuº in the Index of the Navigation
supplement.
The following submenu appears when Vehicle Info
is selected:

Outside Air Temperature

Trip Odometer A*

Trip Odometer B*

Fuel Range

Average Fuel Economy*

Instantaneous Fuel Economy

Fuel Used*
Average Vehicle Speed*

Timer*

Battery Voltage

Engine Oil Life*

Transmission Fluid Life*
(Automatic Transmission Only)

Blank Display
*These items can be reset. Each one must be reset
individually. For a detailed description of the menu
items and how to reset them, see ªStatus Menu Item
Descriptionsº following.
You can view any of these submenu items at any time by
selecting them using the TUNE/SEL knob. The
currently selected item is displayed at the top of the
screen. Only one item can be displayed at a time.

2-105
Battery Voltage/BATTERY VOLTS: If you select this
item, the current battery voltage is displayed. If the
voltage is in the normal range, the display will have OK
after it. For example, the display may read 13.2 Battery
Volts OK.
If there is a problem with the battery charging system,
there are four possible DIC messages that may be
displayed. See ªDriver Information Center (DIC)
Messagesº later in this section for more information.
Engine Oil Life/ENGINE OIL LIFE: If you select
this item, the percentage of remaining oil life is
displayed. If you see 99% Oil Life on the display, that
means that 99% of the current oil life remains.
When the oil life is depleted, the Change Engine Oil
message will appear on the display. You should change
the engine oil as soon as possible within 200 miles. Be
sure to keep a written record of the mileage and date of
the oil change so you will have it for future reference.
When you reset the Change Engine Oil message by
clearing it from the display, you still must reset the
engine oil life monitor separately. For more information
on resetting the engine oil life monitor, see ªOil Life
Monitor, How to Resetº in the Index.The engine oil life monitor does not check the amount
of oil your vehicle has, so you should check the oil level
periodically. See ªEngine Oilº in the Index for more
information.
Transmission Fluid Life/TRANS FLUID LIFE
(Automatic Transmission Only): If you select this
item, the percentage of remaining transmission fluid life
is displayed. If you see 99% Trans Fluid Life on the
display, that means that 99% of the current transmission
fluid life remains.
When the transmission fluid life is depleted, the Change
Transmission Fluid message will appear on the display.
You should change the engine oil as soon as possible
within 200 miles. Be sure to keep a written record of the
mileage and date of the oil change so you will have it
for future reference.
When you reset the Change Transmission Fluid message
by clearing it from the display, you still must reset the
transmission fluid life monitor separately. For more
information on resetting the engine oil life monitor, see
ªTransmission Fluid Life Monitor, How to Resetº in
the Index.

2-106
DIC Messages
These messages will appear if there is a problem sensed
in one of your vehicle's systems. The text messages are
the same for both the base audio and Navigation systems
unless otherwise indicated. The symbols, however,
appear only on the Navigation system display.
You must acknowledge a message to clear it from the
screen for further use. To clear a message, do one of the
following:

Using the Base audio system, press CLR.

Using the Navigation system, press the
multi
-function button next to the OK prompt.
Be sure to take any message that appears on the screen
seriously and remember that clearing the message will
only make the message disappear, not the problem.Battery Not Charging
This symbol appears
with the Battery Not
Charging message.
When this message appears on the display, there is a
problem with the generator and battery charging
systems. Have the electrical system checked by your
dealer as soon as possible.

2-107
Battery Saver Active
This symbol appears
with the Battery Saver
Active message.
This message appears when the system detects that the
battery voltage is dropping beyond a reasonable level.
The battery saver system will start reducing certain
features of the vehicle that you may not be able to
notice. At the point that the features are disabled, this
message is displayed. It means that the vehicle is trying
to save the charge in the battery.
Turn off all unnecessary accessories to allow the battery
to recharge.
The normal battery voltage range is 11.5 to 15.5 volts.
You can monitor battery voltage on the DIC by pressing
the INFO button until you find BATTERY VOLTS
(base audio system) or by selecting Battery Voltage
from the Vehicle Info menu (Navigation system).Battery Voltage HighThis symbol appears
with the Battery Voltage
High message.
This message indicates that the electrical charging
system is overcharging the battery. When the system
detects that the battery voltage is above approximately
16 volts, this message will be displayed.
To reduce the charging overload, use the vehicle's
accessories. Turn on the exterior lamps and radio, set the
climate control on AUTO and the fan speed on the
highest setting, and turn the rear window defogger on.
The normal battery voltage range is 11.5 to 15.5 volts
when the engine is running. You can monitor battery
voltage on the DIC by pressing the INFO button until
you find BATTERY VOLTS (base audio system) or by
selecting Battery Voltage from the Vehicle Info menu
(Navigation system).

2-108
Battery Voltage Low
This symbol appears
with the Battery Voltage
Low message.
This message will appear when the electrical system
is charging less than 10 volts or if the battery has
been drained.
If this message appears immediately after starting, it is
possible that the generator can still recharge the battery.
The battery should recharge while driving but may take
a few hours to do so. Consider using an auxiliary
charger (be sure to follow the manufacturer's
instructions) to boost the battery after returning home or
to a final destination.
If this message appears while driving or after starting
your vehicle and stays on, have it checked immediately
to determine the cause of this problem.
To help the generator recharge the battery quickly, you
can reduce the load on the electrical system by turning
off the accessories.The normal battery voltage range is 11.5 to 15.5 volts.
You can monitor battery voltage on the DIC by pressing
the INFO button until you find BATTERY VOLTS
(base audio system) or by selecting Battery Voltage
from the Vehicle Info menu (Navigation system).
Change Engine Oil
This symbol appears
with the Change Engine
Oil message.
This message indicates that the life of the engine oil has
expired and it should be changed within 200 miles. See
ªEngine Oilº in the Index for more information.
When you reset the Change Engine Oil message by
clearing it from the display, you still must reset the
engine oil life monitor separately. For more information
on resetting the engine oil life monitor, see ªOil Life
Monitor, How to Resetº in the Index.

3-13
Setting Preset Stations
The six numbered pushbuttons (F1 through F6) let
you return to your favorite stations. You can set up to
18 stations (six AM, six FM1 and six FM2). You can
set your preset stations manually or automatically and
presets for home and away.
To set your preset stations manually, perform the
following steps:
1. Turn the radio on.
2. Press BAND to select AM, FM1 or FM2.
3. Tune in the desired station.
4. Press and hold one of the six numbered pushbuttons
for two seconds until you hear a beep. The set preset
station number will appear on the display above the
pushbutton that it is set to. Whenever you press that
numbered pushbutton for less than two seconds, the
station you set will return.
5. Repeat the steps for each pushbutton.
To set your preset stations with an equalization
setting, DSP setting, or a PTY setting, see each of
these features later in this section. When a preset
station is selected, once one of these additional
settings is selected, the preset station will remember
each setting and it will remain active, until the
setting is selected off for that preset station.AUTOSTORE PRESETS: To set your preset stations
automatically, perform the following steps:
1. Turn the radio on.
2. Press BAND to select AM, FM1 or FM2.
3. Press the TUNE/SEL knob to enter the main menu.
4. Turn the TUNE/SEL knob until AUTOSTORE
PRESETS appears on the display.
5. Press the TUNE/SEL knob again to select.
AUTOSTORE will appear on the display. The radio
will automatically search the band and select and
store the six radio stations with the strongest signal.
The stations will be stored by signal strength, not
sequential order. The set preset station number will
appear on the display above the pushbutton that it is
set to. Whenever you press that numbered
pushbutton for less than two seconds, the station that
is set will return.
6. Press the BACK button to exit the display. To return
to the original display repeatedly press the BACK
button or wait for the display to time out.
When battery power is removed and later applied, you
will not have to reset your radio presets because they
remain in the radios memory.

3-29 Understanding Radio Reception
AM
The range for most AM stations is greater than for FM,
especially at night. The longer range, however, can
cause stations to interfere with each other. AM can pick
up noise from things like storms and power lines. Try
reducing the treble to reduce this noise if you ever get it.
FM Stereo
FM stereo will give you the best sound, but FM signals
will reach only about 10 to 40 miles (16 to 65 km). Tall
buildings or hills can interfere with FM signals, causing
the sound to come and go.Cellular Phone Usage
Cellular phone usage may cause interference with your
vehicle's radio. This interference may occur when
making or receiving phone calls, charging the phone's
battery or simply having the phone ªonº. This
interference is described as an increased level of static
while listening to the radio. If you notice static while
listening to the radio, unplug the cellular phone and
turn if off.

4-29

Tie a red cloth to your vehicle to alert police that
you've been stopped by the snow.

Put on extra clothing or wrap a blanket around you.
If you have no blankets or extra clothing, make body
insulators from newspapers, burlap bags, rags, floor
mats
-- anything you can wrap around yourself or
tuck under your clothing to keep warm.
You can run the engine to keep warm, but be careful.
CAUTION:
Snow can trap exhaust gases under your vehicle.
This can cause deadly CO (carbon monoxide) gas
to get inside. CO could overcome you and kill
you. You can't see it or smell it, so you might not
know it is in your vehicle. Clear away snow from
around the base of your vehicle, especially any
that is blocking your exhaust pipe. And check
around again from time to time to be sure snow
doesn't collect there.
Open a window just a little on the side of the
vehicle that's away from the wind. This will help
keep CO out.
Run your engine only as long as you must. This saves
fuel. When you run the engine, make it go a little faster
than just idle. That is, push the accelerator slightly. This
uses less fuel for the heat that you get and it keeps the
battery charged. You will need a well
-charged battery to
restart the vehicle, and possibly for signaling later on
with your headlamps. Let the heater run for a while.