6-67
To reinstall the rear seat cushion, do the following:
1. Position the seat cushion so that you can route
the safety belts through the proper slots in the
seat cushion.
2. Slide the rear of the cushion up and under the
seatback so the rear
-locating guides hook into the
wire loops on the back frame.
3. With the seat cushion lowered, push rearward and
then press down on the seat cushion until the seat
cushion snaps into place.
4. Push and pull on the seat cushion to make sure it is
locked into place.
5. Check to make sure the safety belts are properly
routed and that no portion of any safety belt is
trapped under the seat cushion.Rear Underseat Fuse Block (Driver's Side)
The driver's side rear fuse block is located under the
rear seat on the driver's side of the vehicle. The rear
seat cushion must be removed to access the rear fuse
block. See ªRemoving the Rear Seat Cushionº
listed previously.
To access the fuse block, push in the two tabs located at
each end of the fuse block cover. Then lift the cover off.
6-69
Minifuses Usage
SPARE Not Used
REAR DR MOD Rear Door Modules
SPARE Not Used
DRIVER DR
MODDriver's Door Module
SPARE Not Used
HDLP
LEVELINGHeadlamp Leveling System
Chassis Sensors (Export Only)
EBCM EBCM (Electronic Brake
Control Module)
CCP CCP (Climate Control Panel)
IGN 3 Heated Seat Modules, Air Inlet
Motor, Shifter Assembly
J Cases Usage
AMP Audio Amplifier
PUSHER FAN Pusher Fan (Export Only)
Circuit
BreakersUsage
SEAT C/B Power Seat Switches, Memory
Seat ModuleRear Underseat Fuse Block (Passenger's Side)
The passenger's side rear fuse block is located under the
rear seat on the passenger's side of the vehicle. The rear
seat cushion must be removed to access the rear fuse
block. See ªRemoving the Rear Seat Cushionº
listed previously.
To access the fuse block, push in the two tabs located at
each end of the fuse block cover. Then lift the cover off.
