F - Owner Maintenance
1-F-28
Suspended Towing
Do NOT tow with sling-type equipment since damage to the bodywork may
result.
Take care when using 'spectacle frame' type towing equipment that the
towing device is well clear of the front or rear apron. Body damage may
occur if the vehicles pass over uneven road surfaces.
Adhere to Towing Regulations
In certain countries the registration number of the towing vehicle and an ON
TOW sign or warning triangle must be displayed in a prominent position at
the rear of the vehicle being towed.
Front Suspended Tow
Caution: To prevent body damage ensure an adequate clearance is
maintained between the car body and (1) the ground and (2) the 'spectacle
frame' of the towing vehicle while your car is being towed.
1. Remove the ignition key from the ignition.
2. Vehicles with manual transmission: Place the gear lever in neutral.
Vehicles with automatic transmission:
Disconnect the propeller shaft at the final drive input flange.
Ensure that the propeller shaft is firmly secured away from the final drive
input flange.
F - Owner Maintenance
1-F-29 3. Raise the vehicle using a 'spectacle frame' type lifting device with a cradle
positioned under each front wheel as shown below.
Rear Suspended Tow
Caution: To prevent body damage ensure an adequate clearance is
maintained between the car body and (1) the ground and (2) the 'spectacle
frame' of the towing vehicle while your car is being towed.
1. Remove the ignition key from the ignition/steering lock.
2. Raise the vehicle using a 'spectacle frame' style lifting device where a
cradle is positioned under each rear wheel as indicated below.
Towing by Another Vehicle
WARNING: When the engine is stationary, there will be no power assistance to
the steering or brakes. Therefore be prepared for relatively heavy steering and
the need for greatly increased brake pedal pressure.
The vehicle may be towed short distances by another provided that a speed
of 48 km/h (30 mph) is not exceeded. Do not tow for more than 24km (15
miles). When being towed, the vehicles gear lever, or gear selector lever
(automatic transmission), must be in Neutral or position N with the ignition
key turned to position II to release the steering lock and to render the horn,
indicators and brake lights operational.
