2003.5 Peugeot Boxer Dag radio

17-11-2003
YOUR BOXER IN DETAIL57
GENERAL FUNCTIONS On/Off With the ignition key in the "ON"position, the audio/telephone/GPS comes on automatically.
Switching off is also automatic when the key is turned to the "STOP"position.
You can also switch the audio/telephone/GPS on or off manually by pressing knob B.
In this case, the audio/telephone/GPS can operate for 20 minutes without the ignition being switched on. Notes:
Ð the SIM card must only be removed or inserted after switching off the audio/telephone/GPS,
Ð when the audio-telephone/GPS is switched off after 20 minutes, communication is possible by pressing button O,
Ð after the ignition has been switched off, the audio/telephone/GPS can be switched on again by pressing button Lor Oor
by inserting a CD in the player.
Anti-theft system The audio/telephone/GPS is coded so that it can only operate in your vehicle. If it is installed in another vehicle, contact yo ur
PEUGEOT dealer to have the system configured. The anti-theft system is automatic and does not require any intervention on your part. VOLUME ADJUSTMENT
Turn knob Bclockwise to increase the volume of the audio-telephone/GPS or anti-clockwise to decrease the volume.
Note: the volume setting is specific to each source. It is posible to have a different setting for the radio, CD, telephone or
voice messages.
SOUND CUT-OFF/RESTORATION
To gradually restore or cut off the volume of an audio source, press the "AUDIO OFF"button.
To gradually restore or cut off the volume of the navigation source voice messages, press the "NAV MUTE"button for more
than one second. Note: during telephone calls, the volume of the other sources is cut off automatically.

17-11-2003
YOUR BOXER IN DETAIL
58
AUDIO SETTINGS Select the audio source (radio or CD) for which you wish to adjust the settings by pressing the "SRC"button repeatedly.
Select the "Audio Setup" function from the audio source menu by turning knob H, then press this knob to confirm.
You will then gain access to the treble, bass, loudness, equalizer, manual equalizer, automatic volume adjustment and balance/fader settings.
Adjusting the treble Select the "Treble"function from the "Audio Setup"menu by turning knob H, then press this knob to confirm.
Turn knob Hto the right for the maximum treble setting.
Leave the cursor in the medium position for a normal setting.
Turn knob Hto the left for a minimum treble setting.
Following adjustment, press knob Hto confirm the change.
Adjusting the bass Select the "Bass"function from the "Audio Setup"menu by turning knob H, then press this knob to confirm.
Turn knob Hto the right for the maximum bass setting.
Leave the cursor in the medium position for a normal setting.
Turn knob Hto the left for a minimum bass setting.
Following adjustment, press knob Hto confirm the change.
Activation/deactivation of the loudness
This function permits automatic accentuation of the bass and treble when the volume is low. Select the "Loudness" function from the "Audio Setup"menu by turning knob H, then press this knob to confirm.
Turn knob Hto select "YES"or "NO" .
When the selection has been made, press knob Hto confirm the change.

17-11-2003
YOUR BOXER IN DETAIL
60
RADIO MODE Radio mode and waveband selection Press the "SRC"button repeatedly to select the required waveband; FM1, FM2, FM3, LW and MW.
The corresponding symbol appears on the display. Manual station search Select the "Frequency" function from the "Radio" audio source menu by turning knob H, then press this knob to confirm.
Turn knob Hto the right to search for a higher frequency or to the left to search for a lower frequency.
Automatic station search Select the "Frequency" function from the "Radio" audio source menu by turning knob H, then press this knob to confirm.
Press respectively button Rto search for a lower frequency or button Tto search for a higher frequency.
The message "SEEK"appears during the search, then scanning stops when the first station is found.
If the traffic information programme TAor the PTYfunction is active, only stations which broadcast this type of programme
are selected. The station search is carried out first with "LOC"sensitivity (selection of the most powerful transmitters) for one scan of the
waveband, then with "DX"sensitivity (selection of the weakest and most distant transmitters).
To carry out a "DX"sensitivity search straight away, select the "LOC/DX"function from the "Radio" source menu by turning
knob H, then press this knob repeatedly to change the sensitivity. The corresponding symbol appears on the display.

17-11-2003
YOUR BOXER IN DETAIL61
Manual station storing Select the required station. Press and hold one of the buttons "1"to "6" for more than one second.
A bleep is heard, confirming that the station has been stored in the memory.
Automatic station storing (Autostore) Select the "Autostore" function from the "Radio" source menu by turning knob H, then press this knob to begin storing.
Your audio/telephone/GPS automatically stores the 6 best transmitters received on the waveband selected. If it was not possible to find 6 transmitters, the remaining memories are not changed. Recalling stored stations On each waveband, a brief press of one of the buttons "1"to "6" recalls the corresponding stored station.
Stereo/Mono receptionSelect the "St/Mono" function from the "Radio" source menu by turning knob H, then press this knob repeatedly to change the
type of reception. The corresponding symbol appears on the screen.

17-11-2003
YOUR BOXER IN DETAIL
62
RDS SYSTEM Using the RDS function on the FM waveband The RDS (Radio Data System) enables you to continue listening to the same station, whatever frequency it is using for the
region you are going through. Select the "TA/AF"function from the "Radio" source menu by turning knob H, then press this knob repeatedly to activate
the AFfunction.
The corresponding symbol appears on the screen.
RDS station following
The display indicates the name of the station selected. The audio/telephone/GPS continuously searches for the transmitter which broadcasts the same programme with the best reception.
Traffic information programme Select the "TA/AF"function from the "Radio" source menu by turning knob H, then press the knob repeatedly to activate the
TA function.
The corresponding symbol appears on the display.
If the station is able to transmit traffic information, the symbol "TP"is displayed following activation of the TAfunction.
All traffic information bulletins will be given priority irrespective of the audio source in use (radio or CD).If you wish to interrupt a message, select the "TA/AF"function by turning knob H, then press this knob repeatedly to deactivate
the TAfunction.
The corresponding symbol appears on the display.Note: the traffic information volume is independent of the normal audio/telephone/GPS volume. You can set it during a mes-
sage by means of knob B.

17-11-2003
YOUR BOXER IN DETAIL75
Voice commands The voice commands enable you to control a certain number of audio/telephone/GPS functions using pre-recorded words or expressions. The voice commands which you can send to the system are divided into two categories:
Ð voice commands without voice identification which permit selection of the system's modes (TEL, RADIO, CD, ...)
Ð voice commands with voice identification which relate to the entering/recalling of names in the telephone directory
and/or navigation addresses.
Activation/Deactivation of the voice commands Press button Non the audio/telephone/GPS control panel or control 4on the steering wheel to activate or deactivate this
function. Notes:
Ð in the absence of voice commands, this function will be deactivated after approximately ten seconds,
Ð if a voice command is not understood, a double bleep is emitted,
Ð the voice command operations are interrupted immediately if an incoming call is received; in this case, when the call ends, the entire operation must be repeated.
Example: to recall the radio station stored on button 3, the key words are: "Radio", "Memory" or "Station" , "3" .
To use these key words, you must say the word "Radio", wait for the confirmation bleep, then say the word "Memory" or
"Station" , wait until the system asks "number please?", then end with the word "3", wait for the confirmation bleep which
will carry out the action requested.
List of recognisable commands available The voice commands (key words) which can be recognised by the system are organised into three levels (levels 1, 2 and 3). When a level 1 command is given, the system makes the level 2 commands available; when a level 2 command is given, the system makes the level 3 commands available.
Ð the level 1 commands are the following:
"MEMO"/"RADIO"/"CD PLAYER"/"NAVIGATION"/"CALL"/"DIAL"/"REDIAL"/"PIN"/"DIRECTORY"/"INTERRUPT"

17-11-2003
YOUR BOXER IN DETAIL
76
"MEMO" function
"READ"/"DELETE" - "STORE" "RADIO" function
"NEXT"/"PREVIOUS"/"FM" then ("1 ... 3")/"MW" or "MEDIUM WAVE"/"LW" or "LONG WAVE"/"STATION" then ("1 ... 6") or
"MEMORY" then ("1 ... 6")/"AUTOSTORE"/"FREQUENCY" then ("1 ... 6" - "POINT" - "CANCEL" - "DELETE" - "INTER-
RUPT" - REPEAT" - "SEND")
"CD PLAYER" function
"STOP"/"PLAY"/"PAUSE"/"PREVIOUS"/"NEXT"/"TRACK" then ("1 ... 20") or "TITLE" then ("1 ... 20") or "NUMBER" then ("1 ... 20")/"SHUFFLE"
"NAVIGATION" function
"DISPLAY" then ("MAP" - "ROUTE" - "HOTELS" - "RESTAURANTS" - "CAR PARKS" - "SERVICE STATIONS" - "NOTHING")/ "ENLARGE" or "ZOOM PLUS"/"REDUCE" "CALL" function "NAME" "DIAL" function
"0 ... 9"/"PLUS"/"CANCEL"/"DELETE"/"INTERRUPT"/"REPEAT"/"SEND" "REDIAL" function "PIN" function
"0 ... 9"/"CANCEL"/"DELETE"/"INTERRUPT"/"REPEAT"/"SEND"
"DIRECTORY" function "READ"/"DELETE" then ("NAME" - "ALL")

17-11-2003
YOUR BOXER IN DETAIL79
The control buttons These let you select and validate the functions, controls and programmes displayed. The control buttons are an integral part of the audio/tele- phone/GPS.
SEL Dial; this has two functions:
Ð Rotation of the dial: This allows you to moveround the screen and thus
select a function. It also allows you:
¥ with a "setting "type parameter, after selection, to
increase or decrease the value,
¥ with a "list "type parameter, to open the list and scroll
through the values,
¥ with mapguidance, to increase or reduce the zoom. Ð Pressing the dial:
This allows:¥ access to the list of controls (contextual menu) of the
permanent display, if there is no other display superim- posed.
¥ confirmation of the selected function or the modified
value.
¥ selection of a "setting" or "list" type parameter for
modification.
"MAIN DARK" button:
Ð Brief press: Displaying of the main screen.
Ð Pressing for more than one second: display stand-by. "AUDIO OFF" button
Ð Brief press: Displaying of the audiosource - Activation of
the display.
Ð Pressing for more than one second: radio or CD off.
"TEL OFF" button:
Ð Brief press: Displaying of the telephonesource -
Telephone source on.
Ð Pressing for more than one second: telephone source off.
"NAV MUTE" button:
Ð Brief press: selection of the navigationsource.
Ð Pressing for more than one second: cutting-off/restoring of voice messages .
"ESC" button:
Ð Brief press: cancellingof operation in progress or
erasing of last superimposed display.
Ð Pressing for more than one second: erasing of all super- imposed displays and return to the permanent display.
"TRIP" button:
Ð Brief press: Displaying of the trip computer source.