Page 138 of 195

29-09-2003
#-
+
Automatic changing of the &-
:
select function in the gate.
The gearbox always selects the most suitable gear according to the follow-ing parameters:
– the style of driving,
– the road profile,
– the vehicle load. The gearbox is then operating in auto-adaptive mode, without anyaction on your part.
)# * Never select function when the
vehicle is moving. Never select functions or unless
the vehicle is stationary.Never change between functions to optimise braking on a slippery surface.
For immediate maximum accelera-
tion without touching the gear lever,press the accelerator pedal down as
far as it will go (kickdown). The gear-box will automatically change downor maintain the gear selected untilmaximum engine speed is reached. When braking, the gearbox will auto- matically change down in order to
provide efficient engine braking. If you take your foot off the accelera-
tor suddenly, the gearbox will notchange to a higher gear for reasons
of safety.
.
In addition to the auto-adaptive pro- gramme, there are two special pro-grammes. The programme is displayed on the instrument panel screen.
Press button once the vehicle
has been started and function
selected.
The gearbox automatically favours sporty driving and more dynamicacceleration.
.
This programme improves starting
and drive when traction is poor. Press button once the vehicle
has been started and function
selected.
The gearbox adapts to driving on slippery roads. you can return to the auto-
adaptive programme at any time. Press button or again to
switch off the programme you are in.
-
Manual changing of the
&-
:
select function in the gate,
push the lever to the 4sign to
change to a higher gear,
pull the lever to the 5sign to
change to a lower gear.
You can change from position
(driving in automatic mode) to posi- tion (driving in manual mode) at
any time. It is only possible to change from one gear to another if the vehicle speedand engine speed permit. If they donot, the vehicle will operate tem-porarily in automatic mode. When the vehicle is stationary or
moving very slowly, the gearboxautomatically selects gear %.
Programme (sport) and (snow)
do not operate in manual mode.
!"# $ %%
Page 139 of 195
29-09-2003
Pull on the handle and press the button to release the handbrake.Illumination of this warninglight and of the "warning
light, accompanied by anaudible signal (while thevehicle is being driven) and
the message /
/ on
the multi-function display, indicatesthat the handbrake is still on or hasnot been properly released.
6 Any operating abnormality is indicat- ed by an audible signal, accompa-nied by the message /#-
+
&
- / on the multi-function dis-
play, /5/and flashing of the Sport
and Snow warning lights on theinstrument panel. In this situation the gearbox operates in downgrade mode (locked in 3rd
gear). You may feel a substantialknock when changing from to
and from to (this will not cause
any damage to the gearbox). Do not exceed 60 mph (100 km/h), keeping within the limit of localspeed restrictions.
Contact a PEUGEOT dealer as soon as possible. 1#2#7! # 6 Pull the handbrake to immobilise your vehicle.
!"# $
%8
Page 140 of 195
29-09-2003
Pull on the handle and press the button to release the handbrake.Illumination of this warninglight and of the "warning
light, accompanied by anaudible signal (while thevehicle is being driven) and
the message /
/ on
the multi-function display, indicatesthat the handbrake is still on or hasnot been properly released.
6 Any operating abnormality is indicat- ed by an audible signal, accompa-nied by the message /#-
+
&
- / on the multi-function dis-
play, /5/and flashing of the Sport
and Snow warning lights on theinstrument panel. In this situation the gearbox operates in downgrade mode (locked in 3rd
gear). You may feel a substantialknock when changing from to
and from to (this will not cause
any damage to the gearbox). Do not exceed 60 mph (100 km/h), keeping within the limit of localspeed restrictions.
Contact a PEUGEOT dealer as soon as possible. 1#2#7! # 6 Pull the handbrake to immobilise your vehicle.
!"# $
%8
Page 143 of 195

29-09-2003
0 !0"$ Cruise control enables the vehicle to maintain a steady speed pro-
grammed by the driver, regardless ofthe road characteristics and withoutthe driver having to touch the accelera-tor or brake pedals. In order for it to be memorised, the vehicle speed must be greater than25 mph (40 km/h) (manual gearbox)or 40 mph (60 km/h) (automaticgearbox) and fourth gear at leastmust be engaged (second gear forthe automatic gearbox).
Place switch %in the position.
A speed can be memorised. Place switch %in the ;;posi-
tion to cancel.
As soon as you reach the chosen speed, press button 8or . This
memorises the speed, which will be
maintained automatically. It is possible to accelerate and
drive momentarily at a speed greater than the memorised speed. Whenthe accelerator pedal is released, thevehicle will return to the memorisedspeed.
0
+
If you wish to cancel the memorised speed: press button ?or the brake or
clutch pedal. +
After cancellation, press button
?.
Your vehicle will return to the last memorised speed.
0
To memorise a speed higher than the previous one: press button ;
release it when you have reached the required speed.
To memorise a speed lower than theprevious one: appuyez sur la touche 8;
release it when you have reached the required speed.
0
+ +-
+ Place switch %in the ;;posi-
tion or switch off the ignition.
!"# $ %@
*
Page 144 of 195

29-09-2003
+&-+ Place switch %in the 0 ! posi-
tion. The cruise control is not yet active and no speed has been
memorised. The display indicates:
.+&-+&& Place switch %in position or
$ " to switch the system off.
#+
>
As soon as you reach the chosen speed, press button 8or . This
memorises the speed, which will
be maintained automatically. Thedisplay indicates (e.g. at 80 mph(130 km/h)): It is possible to accelerate and
drive momentarily at a speed greater
than the memorised speed. Thevalue memorised flashes. When theaccelerator pedal is released, thevehicle will return to the memorisedspeed.
0 !0"$>!! $ "!A
0-
+ &-+
this enables
the vehicle to maintain a steady speed
programmed by the driver, regardlessof the road characteristics and withoutthe driver having to touch the accelera-tor or brake pedals. In order for it to be memorised, the vehicle speed must be greater than25 mph (40 km/h) with at least fourthgear engaged (second gear for theautomatic gearbox), .
- .
* During the year, according to engine.
!"# $
%B
0
+
If you wish to cancel the memorised speed: Press button ?or the brake or clutch
pedal. The display indicates (e.g. at 80 mph (130 kmh)):
the speed memorised is can-
celled automatically if the vehiclespeed is less than 25 mph (40 kmh),or if the manual gearbox is in a gearlower than fourth (second gear forthe automatic gearbox) or if the ESPis activated.
+
After cancellation, press button ?.
Your vehicle will return to the last
memorised speed. The display indi-cates (e.g. at 80 mph (130 km/h)):