2003.5 Peugeot 307 Break Dag Owner's Manual

29-09-2003
The contextual menu associated with the 0
$
+
&0 application
appears as a superimposed display,when this is the application currently in
use in the main screen window. This menu is limited to the following functions:
– changing of the initial route (entering of a diversion),
– switching to "Selection-Movement on map" mode*,
– storing of the current location (postal address if available or, if it is not, the GPS co-ordinates),
– changing of the route calculation criteria,
– stopping or resuming of guidance (displaying of the message whichchanges depending on the previ-ous status).





 
A
0
$
+
&0
&E
'&
*
"
..
& $&
*)&(


..
.' This function enables you to receive
messages regarding the traffic
conditions (accidents, traffic jams,
weather, ...). They may appear temporarily as a superimposed display or be read by
the voice synthesiser, if it is active.
In map mode*, special TMC symbols are displayed depending on the typeof information. Select the
0



..
.'+
0 function on the 0
&&' 0
menu, you can choose: – "Consult the messages",
– "Filter the TMC info":
 in relation to a route, if guidanceis in progress,
 in relation to a type of event,
 around a location and/or the vehicle,
– "Voice synthesiser",
– "Activate/Deactivate traffic info".
* DT colour screen only.

29-09-2003
The contextual menu associated with the 0
$
+
&0 application
appears as a superimposed display,when this is the application currently in
use in the main screen window. This menu is limited to the following functions:
– changing of the initial route (entering of a diversion),
– switching to "Selection-Movement on map" mode*,
– storing of the current location (postal address if available or, if it is not, the GPS co-ordinates),
– changing of the route calculation criteria,
– stopping or resuming of guidance (displaying of the message whichchanges depending on the previ-ous status).





 
A
0
$
+
&0
&E
'&
*
"
..
& $&
*)&(


..
.' This function enables you to receive
messages regarding the traffic
conditions (accidents, traffic jams,
weather, ...). They may appear temporarily as a superimposed display or be read by
the voice synthesiser, if it is active.
In map mode*, special TMC symbols are displayed depending on the typeof information. Select the
0



..
.'+
0 function on the 0
&&' 0
menu, you can choose: – "Consult the messages",
– "Filter the TMC info":
 in relation to a route, if guidanceis in progress,
 in relation to a type of event,
 around a location and/or the vehicle,
– "Voice synthesiser",
– "Activate/Deactivate traffic info".
* DT colour screen only.

29-09-2003





 A,
&&
&

)&
010 11F The 010 application has two
display modes:
G 0&)&
.7$

'10 mode, representing active guid-
ance on the map on the right and a large-scale view of the next inter-section on the left,
G 0&&+&'&

'10 mode, representing consultation ofthe map on the right and a compasson the left.
To switch from one mode to the
other, press the dial on the right
briefly, then select the 0&
)&
'10 or 0E
'1
'&0 function.
In 0&&+'&'&

'10
mode, you can see symbols, repre-senting the various types of serviceswhich exist, sorted by category: – "Administration and safety" symbol on a grey background,
– "Hotels, bars and restaurants" symbol on a yellow background,
– "Other businesses" symbol on a purple background,
– "Culture, tourism and entertainment" symbol on a white background,
– "Sports centres and open air centres" symbol on a green background,
– "Transporation and automobiles" symbol on a blue background. A
0H'0 function enables you to
enlarge the map, in accordance with the thirteen preset levels relating tothe following scales:
– 50 m/cm, 100 m/cm, 150 m/cm, 200 m/cm, 500 m/cm,
– 1 km/cm, 2 km/cm, 5 km/cm,– 10 km/cm, 20 km/cm, 50 km/cm,– 100 km/cm, 200 km/cm.This is achieved by turning the dial. This mode permits:
– displaying of the vehicle on the map with the route proposed by the navigation if the guidance isactive,
– zooming in on the map in accor- dance with the thirteen preset lev-
els,
– displaying of the 0
$
+
&0 contextual menu.
0&)&
.7$

'10
'&
This mode permits:
– selection of any point on the map
to obtain guidance towards it or to obtain information about it (postal
address if available or, if it is not,GPS co-ordinates),
– movement on the map by means of the four directional arrows, rep-resenting the four cardinal points
(North, East, South, West),
– zooming in on the map in accor- dance with the thirteen preset lev-
els,
– displaying of the 010contextual
menu.
* DT colour screen only.
0&&+&'&

'10'&

29-09-2003





 
A
From the $&&
'& , the main
010 menu offers various options
for guidance management:
– switching to "Selection-Movement on map" mode,
– direction of the map towards the North or in the direction of the vehicle,
– recentering of the map around the vehicle,
– opening of the services selection window visible on the map, such as hotels, service stations, etc.
– displaying of the window for ente- ring the description for recording
the current position of the vehiclein a directory file.
1
The contextual menu associated with the
010 application and with the
0&&+&'&

'10mode appears as a superimposed dis-
play, when these are in use in the
main screen window. This menu is limited to the following functions:
– displaying of the information on the location selected on the map,
– selection of a location on the map as a destination,
– storing of the location selected (postal address if available or, if it is not, GPS co-ordinates, so thatthey can be recorded in a directoryfile),
– switching to "Vehicle following on map" mode.
010
&E
'&







 








 



 Windscreen de-icing or demisting vents.
 Front window de-icing or demisting vents.
 Side vents.
 Centre vents.
 Air outlet to front footwells.
 Air outlet to rear footwells.


 !"  Place the air flow control at a level sufficient to ensure a good renewal of air in the  

 
 

! ##$$## 










 

 
 

"%  "


##$$##

 "
#
$


  %
 


"





& '
$




&


(




 $

'

 












 
'






(






&

$


 

 
 






 







 

&

'(




) !"* 
!+*,")"
To
&

)


"


*
   
," -*"
!+*,")"







 


#
 +
 %
!
*$"
















, - 


 $
 

&



../


..
 '
#& 

'




%'
- 

 






  


('
- 

 

 







 
Windscreen, side windows
and footwells. Footwells.
Centre and side vents.
 
./0
!+*,")" Turn the control from 




&




 

 

"


  
"!1

 
&







 



0
 '



&"
 






'

 
(






$


 
 

 

 
 




&'

&










 
 














*"
!




  ),"2
"3
!
, 
!
4" 
)  ,


  

  '

 

&
 















!



"



("

  


 



 







 
1

&



 
&"

 

&

&