2003.5 PEUGEOT 206 Owners Manual

01-12-2003
PRACTICAL INFORMATION
148
CHANGING A WHEEL (206 SW) Parking the vehicle
0 -
 *


 


*
 




#  

0 


 *


  

*
'  

P

 
 ")
Access to the spare wheel andthe jack
!



 

 *



*




 
0 2

 
1



 #


  0 5


 

1*





 






 






0 = 

 




*




0 2

;

"
2





Removing a wheel
0 





 

 





* 


 




;

"
0 2


 



 *






 
0 8




0 

;










 #
E














 



;







 



0 "


;*











01-12-2003
PRACTICAL INFORMATION149
Refitting the wheel
0 
  



*
 
# 






 
0 

;




0 9
 






 
0 2

 
"






#

*


 


*














Note: -

 

 


 

 



 #
*

 





 #






Replacing the wheel in the carrier
0 2

;

"




0 2



3 
 




#



0 2





 *
 



3








 *
 














 
 
'

#




)
0 = 





 


  



0 





 




 




0 8

 
For your safety, always change a wheel:
Ð on level, stable and non slippery ground,
Ð with the handbrake applied,
Ð with first or reverse gear engaged,
Ð with the vehicle chocked using the jack storage box,
Ð never go underneath a vehicle raised using a jack (use an axle stand).







Ð Have the tightening of the bolts and the pressure of the spare tyre checked as soon as possi-
ble by a PEUGEOT dealer.
Ð Have the punctured tyre repaired and replace it on thevehicle as soon as possible.
Ð The space-saver spare wheel fitted with a 115/70 R 15 tyremust only be used  :
0 inflation pressure: 4.2 bars
(60 p.s.i.),
Ð maximum speed: 50 mph (80 km/h).

01-12-2003
PRACTICAL INFORMATION151
SPECIAL FEATURES OF
ALLOY WHEELS Bolt covers







 
5



4


 






!
4 
+
0 






>$&
1!
(?$*



 






 *
0 


>$&
8
*



;
 
 Fitting the spare wheel
-

 

/ 
 



*


 

*
 

normal 

 












 

 
!







#

  Fitting snow tyres
-

 










 



 *

essential 


 

  


516!  Wheel anti-theft bolts
-



 
 

 #


'


)*

#
 






 







*




4*

#














 #

'




")



 
1
Note: 








 









 #

! 
 

 


 


 

 #
 

516! 

01-12-2003
PRACTICAL INFORMATION
150
CHANGING A WHEEL
Tools
0 !
;








2






#

 



0 !
 



 








 





Wheel changing procedure
!



>$&
1!
(?$

 
 

 #

!















2





 

PUNCTURES (206 GTi 180)

 
 








*

 



 
 
'

 
)






"

1






#

 


 Using the repair aerosols
'2


 







)  -
 


 ;
 









 !












8


 


-



*












 9 "








*




 
 :










 





 


*



 
 3




 





 2






#
 
 


@
 
'%
)
 -
 *






 !

 
 
at
moderate speed 




The aerosol cans enable you to carry out a tempo-rary repair (maximumspeed 50 mph (80 km/h)).
After use, the tyre must be
replaced. As the aerosol cans arepressurised, they must not beexposed to a temperature above 50¡C. Store them away from heat in their insulated storage box.

01-12-2003
PRACTICAL INFORMATION151
SPECIAL FEATURES OF
ALLOY WHEELS Bolt covers







 
5



4


 






!
4 
+
0 






>$&
1!
(?$*



 






 *
0 


>$&
8
*



;
 
 Fitting the spare wheel
-

 

/ 
 



*


 

*
 

normal 

 












 

 
!







#

  Fitting snow tyres
-

 










 



 *

essential 


 

  


516!  Wheel anti-theft bolts
-



 
 

 #


'


)*

#
 






 







*




4*

#














 #

'




")



 
1
Note: 








 









 #

! 
 

 


 


 

 #
 

516! 

01-12-2003
PRACTICAL INFORMATION
152
Dipped/main headlamps H7 55 W
0 


A




 

0  






0 







 




 

 
0 6

 
*




  






 
  





 



0 2






0 2

 
 Side lights W 5 W
!








B
/









 
Remarks
0 6



 
 



0 !


 



 
 *


# 
 
 
 
 
0 

 




 


-
 
 



 


CHANGING A BULB

PRACTICAL INFORMATION153
Amber direction indicator
side repeater WY 5 W





#





 
:














/





 
Amber direction indicators
PY 21 W
!







C
/









 
PEUGEOT recommends the use of H7 bulbs ofbrands:
Ð GE/TUNGSRAM,
Ð PHILIPS,
Ð OSRAM,
to avoid damaging the headlamps. These comply with the anti-UV (ultraviolet) specifications neces-sary for the correct operation andreliability of the headlamps. The headlamps are fitted with polycarbon glass with a protective
coating. We strongly adviseagainst cleaning them using a dryor abrasive cloth or using deter-gents or solvents. Use a soft, damp cloth.Amber bulbs must be replaced with bulbs of identical specifica-
tion and colour.
01-12-2003

01-12-2003
PRACTICAL INFORMATION155
Front fog lamps H1 55 W






















!






































Third brake light 5 bulbs W 5 W (saloon)



"#









$


A






 

%&

'






B









 




 Third brake light (206 SW)
! 








(











)*) !