Page 18 of 432

Adjusting the rear brake light switch. 8-103
Cable inspection and lubrication ..... 8-105
Brake lever and brake pedal
lubrication ...................................... 8-107
Wheel removal ................................ 8-109
Wheel installation ............................. 8-111
Battery ............................................. 8-113
Battery maintenance ....................... 8-117
Fuse replacement ............................ 8-119
Replacing the headlight bulb ........... 8-123
Headlight beam adjustment ............. 8-127
Tail/brake light bulb replacement ..... 8-129
Troubleshooting ............................... 8-133
Troubleshooting chart ...................... 8-135
CLEANING AND STORAGE .................. 9-1
A. Cleaning .......................................... 9-1
B. Storage ........................................... 9-7
SPECIFICATIONS ................................ 10-1
HOW TO USE THE CONVERSION
TABLE ................................................... 11-1
91011U5GH62.book Page 3 Monday, August 6, 2001 9:09 AM
Page 54 of 432
3-1
EBU00032
DESCRIPTION AND MACHINE
IDENTIFICATION1. Rear spring preload
adjusting ring
2. Storage box and tool kit
3. Spark plug
4. Rear brake fluid reservoir
5. Radiator cap
6. Front spring preload
adjusting ring
7. V-belt case
8. Rear brake pedal
9. Front spring preload
adjusting ring
10. Fuel cock
11. Air filter case
12. Fuses
13. Tail/brake light14. V-belt cooling duct check
hose
15. Coolant reservoir
16. Oil filter cartridge
17. Engine oil dipstick
18. Rear brake lever
19. Left handlebar switches
20. Starter (choke)
21. Horn switch
22. Drive select lever
23. Speedometer
24. Main switch
25. Fuel tank cap
26. Auxiliary DC jack
27. Right handlebar switch
28. Throttle lever
29. Front brake leverNOTE:The machine you have purchased may differ
slightly from those shown in the figures of this
manual.
U5GH62.book Page 1 Monday, August 6, 2001 9:09 AM
Page 114 of 432
4-51
CAUTION:
Do not use accessories requiring more
than the above maximum capacity. This
may overload the circuit and cause the
fuse to blow.
If accessories are used without the engine
running or with the headlights turned on,
the battery will lose its charge and engine
starting may become difficult.
Do not use an automotive cigarette lighter
or other accessories with a plug that gets
hot because the jack can be damaged.
U5GH62.book Page 51 Monday, August 6, 2001 9:09 AM
Page 378 of 432
8-119 1. Main fuse 2. Spare fuse
1. Fusible principal 2. Fusible de rechange
1. Fusible principal 2. Fusible de repuesto
1. Fuse box
1. Boîte à fusibles
1. Caja de fusibles
EBU00745*
Fuse replacement
1. The fuse cases are under the seat.
2. If a fuse is blown, turn off the main switch and
the switch of the circuit in question. Then, in-
stall a new fuse of the specified amperage.
Turn on the main switch. If the fuse immedi-
ately blows again, consult a Yamaha dealer.
Specified fuses:
Main fuse: 30 A
Headlight fuse: 15 A
Ignition fuse: 10 A
Auxiliary DC jack fuse: 10 A
Four-wheel-drive fuse: 3 A
Signal fuse: 10 A
U5GH62.book Page 119 Monday, August 6, 2001 9:09 AM
Page 380 of 432
8-121 1. Headlight fuse
2. Ignition fuse
3. Auxiliary DC jack fuse
4. Four-wheel-drive fuse
5. Signal fuse
6. Spare fuse (× 3)
1. Fusible de phare
2. Fusible d’allumage
3. Fusible de prise pour accessoires
4. Fusible du système 4x4
5. Fusible de signalisation
6. Fusible de rechange (× 3)
1. Fusible del faro
2. Fusible del sistema de encendido
3. Fusible de la toma de CC auxiliar
4. Fusible del sistema de tracción en las cuatro ruedas
5. Fusible señalización
6. Fusible de repuesto (× 3)
WARNING
Always use a fuse of the specified rating. Nev-
er use any type of material or object in place of
the proper fuse. An improper fuse can cause
damage to the electrical system which could
lead to a fire.CAUTION:
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.
U5GH62.book Page 121 Monday, August 6, 2001 9:09 AM