2002 YAMAHA BLASTER 200 transmission

Engine oil ............................................5-13
Transmission oil .................................5-15
Chain ..................................................5-17
Throttle lever ......................................5-17
Fittings and fasteners .........................5-17
Lights ..................................................5-19
Switches .............................................5-19
Tires ...................................................5-21
How to measure tire pressure ............5-25
Tire wear limit .....................................5-27
OPERATION ............................................6-1
Starting a cold engine ...........................6-3
Starting a warm engine ........................6-9
Warming up ..........................................6-9
Shifting ...............................................6-11
To start out and accelerate .................6-15
To decelerate .....................................6-19
Engine break-in ..................................6-21
Parking ...............................................6-25
Parking on a slope ..............................6-27Accessories and loading ....................6-29
RIDING YOUR ATV .................................7-1
Getting to know your ATV.....................7-3
Ride with care and good
judgement ...........................................7-5
Be careful where you ride ...................7-27
Turning your ATV ...............................7-43
Climbing uphill ....................................7-47
Riding downhill ...................................7-59
Crossing a slope .................................7-63
Crossing through shallow water .........7-67
Riding over rough terrain ....................7-71
Sliding and skidding ...........................7-73
What to do if .......................................7-77
What to do ..........................................7-77
PERIODIC MAINTENANCE AND
ADJUSTMENT.........................................8-1
Owner’s manual and tool kit .................8-3
Periodic maintenance/Lubrication ........8-7
Transmission oil .................................8-13
6
7
8
5KJ-62 (0~3 shou) 4/23/01 3:03 PM Page 13

Réglage de la pompe Autolube...........8-60
Vérification de la flèche de la chaîne
de transmission .................................8-62
Réglage de la flèche de la chaîne de
transmission ......................................8-64
Lubrification de la chaîne de
transmission ......................................8-66
Contrôle et lubrification des câbles ....8-70
Lubrification des pédales de sélection
et de frein et des leviers de frein et
d’embrayage .....................................8-72
Lubrification du pivot de bras
supérieur et inférieur.........................8-72
Lubrification de l’arbre de direction...8-74
Dépose des roues ................................8-74
Repose des roues ................................8-74
Remplacement de l’ampoule de
phare .................................................8-76
Réglage du faisceau de phare .............8-80
Remplacement d’une ampoule de feu
arrière/stop ........................................8-82 ENTRETIENS ET RÉGLAGES
PÉRIODIQUES........................................8-2
Manuel du propriétaire et trousse à
outils ...................................................8-4
Entretiens et graissages périodiques .....8-9
Huile de boîte de vitesses ...................8-14
Inspection de la bougie .......................8-22
Nettoyage du filtre à air ......................8-26
Réglages du carburateur .....................8-34
Réglage du ralenti ...............................8-46
Réglage du levier d’accélération ........8-48
Contrôle des mâchoires de frein
avant..................................................8-50
Contrôle des plaquettes de frein
arrière ................................................8-50
Réglage du jeu de levier du frein
avant..................................................8-52
Réglage du frein de stationnement .....8-56
Réglage du contacteur de feu stop
sur frein arrière .................................8-58
Réglage de l’embrayage .....................8-608
5KJ-62 (0~3 shou) 4/23/01 3:03 PM Page 18

4-23
EBU00082
Shift pedal
This machine is equipped with a constant-mesh
6-speed transmission. The shift pedal is located
on the left side of the engine and is used in com-
bination with the clutch when shifting.
EBU00089
Kick starter
Rotate the kick starter away from the engine.
Push the starter down lightly with your foot until
the gears engage, then kick smoothly and force-
fully to start the engine. This model has a prima-
ry-coupled kick starter so the engine can be
started in any gear if the clutch is disengaged.
However, shifting to neutral before starting is
recommended.
q
6
5
4
3
2
N
1
q
1. Shift pedal N. Neutral1. Pédale de sélection N. Point mort1. Pedal del cambio N. Punto muerto
1. Kick starter
1. Pédale de kick1. Pedal de arranque
5KJ-62 (4~5 shou) 4/23/01 3:04 PM Page 24

5-1
EBU00113
PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Front brake9Check operation, condition and free play.
5-5~ 5-7, 8-49 ~ 8-53
9Adjust if necessary.
Rear brake9Check operation and brake pad. 5-5 ~ 5-7, 8-49
Clutch9Check operation, condition and lever free play. 8-59
Parking brake9Check operation, condition and cable free play. 8-55
Fuel 9Check fuel level.
9Fill with fuel if necessary.5-9 ~ 5-11
Transmission oil9Check oil level.
9Fill with oil if necessary.5-15, 8-13 ~ 8-19
Engine oil9Check oil level.
9Fill with oil if necessary.5-13
Drive chain9Check chain slack and condition.
9Adjust if necessary.5-17, 8-61 ~ 8-67
Throttle9Check for proper throttle cable operation. 5-17, 8-47
Wheels and tires9Check tire pressure, wear and damage. 5-21 ~ 5-27, 8-73
Fittings and Fasteners9Check all fittings and fasteners. 5-17
Lights9Check for proper operation. 5-19, 8-75 ~ 8-81
5KJ-62 (4~5 shou) 4/23/01 3:04 PM Page 38

5-2
FBU00113
CONTRÔLES AVANT LE DÉMARRAGE
Contrôler les points suivants avant de mettre le moteur en marche:
5
DESCRIPTION VÉRIFICATION PAGE
Frein avant9Contrôler le fonctionnement, l’état et le jeu.
5-6~ 5-8, 8-50 ~ 8-54
9Régler si nécessaire.
Frein arrière9Contrôler le fonctionnement et les plaquettes de frein. 5-6 ~ 5-8, 8-50
Embrayage9Contrôler le fonctionnement, l’état et le jeu du levier. 8-60
Frein de stationnement9Contrôler le fonctionnement, l’état et le jeu du câble. 8-56
Carburant9Vérifier le niveau de carburant.
9Ajouter du carburant si nécessaire.5-10 ~ 5-12
Huile de boîte de vitesses9Vérifier le niveau d’huile.
9Ajouter de l’huile si nécessaire.5-16, 8-14 ~ 8-20
Huile moteur9Vérifier le niveau d’huile.
9Ajouter de l’huile si nécessaire.5-14
Chaîne de transmission9Contrôler la flèche et l’état de la chaîne.
9Régler si nécessaire.5-18, 8-62 ~ 8-68
Accélérateur9Vérifier le fonctionnement des câbles d’accélérateur. 5-18, 8-48
Roues et pneus9Contrôler la pression, l’usure et l’état des pneus. 5-22 ~ 5-28, 8-74
Visserie9Contrôler tous les visseries. 5-18
Éclairage9Contrôler si le fonctionnement est correct. 5-20, 8-76 ~ 8-82
5KJ-62 (4~5 shou) 4/23/01 3:04 PM Page 39

5-15
EBU00490
Transmission oil
Make sure the transmission oil is at the specified
level. Add oil as necessary. (See pages 8-13 ~
8-19.)
cC
Be sure to use motor oils that do not contain
anti-friction modifiers. Passenger car motor
oils (often labeled “Energy Conserving”)
contain anti-friction additives which will
cause clutch and/or starter clutch slippage,
resulting in reduced component life and poor
engine performance.
Recommended oil:
SAE 10W30
Recommended oil classification:
API Service SE, SF, SG type or higher
Oil quantity:
Total amount:
0.7 L
Periodic oil change:
0.65 L
5KJ-62 (4~5 shou) 4/23/01 3:04 PM Page 52

6-3
EBU00512
Starting a cold engine
w
Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or
do not work smoothly, you could be unable
to control the ATV, which could lead to an
accident or collision.
1. Set the parking brake.
2. Turn the fuel cock to “ON”.
3. Turn the main switch to “ON” and the engine
stop switch to “RUN”.
4. Shift the transmission into neutral.
5. Use the starter (choke) in reference to the
figure:
5KJ-62 (6 shou) 4/23/01 3:05 PM Page 4

6-11
EBU00198
Shifting
This model has a 6-speed forward transmission.
The transmission allows you to control the
amount of power you have available at a given
speed or for starting, accelerating, climbing hills,
etc. To shift into neutral, return the throttle lever
to its original position, apply the clutch and
repeatedly depress the shift pedal until it stops.
When it stops, it will be in first gear. Raise the
pedal slightly to neutral.

6
5
4
3
2
N
1
N. NeutralN. Point mortN. Punto muerto
5KJ-62 (6 shou) 4/23/01 3:05 PM Page 12