2002 YAMAHA BLASTER 200 service

4-28
FBU00094
Starter (choke)
La mise en marche à froid requiert un mélange
air-carburant plus riche. C’est le starter qui rem-
plit cette fonction d’enrichissement du mélange.
Déplacer dans la direction apour mettre le
starter (choke) en service.
Déplacer dans la direction bpour mettre le
starter (choke) hors service.
La marche à suivre correcte est décrite à la sec-
tion “Mise en marche d’un moteur froid”. (Pour
plus de détails, voir page 6-4.)
SBU00094
Starter (choke)
Cuando el motor está frío, requiere una mezcla
más rica de combustible para arrancar. Esta
mezcla se suministra a través de un circuito
separado, el circuito del “starter”. Mueva en la
dirección apara conectar el arrancador
(estrangulador).
Mueva en la dirección bpara desconectar el
arrancador (estrangulador).
Consulte el apartado de “Arranque en frío del
motor” para ver la operación adecuada.
(Consulte la página 6-4.)
5KJ-62 (4~5 shou) 4/23/01 3:04 PM Page 29

5-15
EBU00490
Transmission oil
Make sure the transmission oil is at the specified
level. Add oil as necessary. (See pages 8-13 ~
8-19.)
cC
Be sure to use motor oils that do not contain
anti-friction modifiers. Passenger car motor
oils (often labeled “Energy Conserving”)
contain anti-friction additives which will
cause clutch and/or starter clutch slippage,
resulting in reduced component life and poor
engine performance.
Recommended oil:
SAE 10W30
Recommended oil classification:
API Service SE, SF, SG type or higher
Oil quantity:
Total amount:
0.7 L
Periodic oil change:
0.65 L
5KJ-62 (4~5 shou) 4/23/01 3:04 PM Page 52

5-16
FBU00490
Huile de boîte de vitesses
S’assurer que le niveau d’huile de boîte de
vitesses est conforme aux spécifications. Ajouter
de l’huile si nécessaire. (Voir pages 8-14 à 8-20.)
fF
Veiller à ce que l’huile de moteur utilisée ne
contienne pas d’additifs antifriction. Les huiles
pour automobiles (portant souvent la désignation
“ENERGY CONSERVING”) contiennent des
additifs antifriction. Ceux-ci feront patiner
l’embrayage et/ou l’embrayage de démarreur, ce
qui provoquera une réduction de la durabilité des
organes et du rendement.
SBU00490
Aceite de la transmisión
Asegúrese de que el aceite de la transmisión se
encuentra al nivel especificado. Añada aceite si
es necesario (ver páginas 8-14 ~ 8-20).
yY
Asegúrese de que los aceites de motor no
contengan modificadores antifricción. Los
aceites de motor para automóviles de pasa-
jeros (que tienen normalmente la etiqueta de
“Energy Conserving”) contienen aditivos
antifricción que causan patinaje del embra-
gue y/o del embrague del arrancador, lo que
reduce la vida útil de los componentes e
impide que el motor rinda como debiera.
Huile recommandée:
SAE 10W30
Classe d’huile recommandée:
Huiles de type API Service, de classe SE,
SF, SG min.
Quantité d’huile:
Quantité totale:
0,7 l
Vidange périodique:
0,65 lAceite recomendado:
SAE 10W30
Clasificación recomendada del aceite:
Tipo API Servicio “SE”, “SF”, “SG”, o
mejor
Cantidad de aceite:
Cantidad total
0,7 L
Cambio de aceite periódico
0,65 L
5KJ-62 (4~5 shou) 4/23/01 3:04 PM Page 53

5-17
EBU00498
Chain
Check the general condition of the chain and
check the chain slack before every ride.
Lubricate and adjust the chain as necessary.
(See pages 8-61 ~ 8-67 for details.)
EBU00151
Throttle lever
Check to see that the throttle lever operates cor-
rectly. It must open smoothly and spring back to
idle position when released. Repair as neces-
sary for proper operation.
EBU00152
Fittings and Fasteners
Always check the tightness of chassis fittings
and fasteners before a ride. Take the machine
to a Yamaha dealer or refer to the Service
Manual for correct tightening torque.
5KJ-62 (4~5 shou) 4/23/01 3:04 PM Page 54

8-1
EBU00516
PERIODIC
MAINTENANCE AND
ADJUSTMENT
Periodic inspection, adjustment and lubrication
will keep your machine in the safest and most
efficient condition possible. Safety is an obliga-
tion of the machine owner. The most important
points of machine inspection, adjustment and
lubrication are explained on the following pages.
w
Never service an engine while it is running.
Moving parts can catch clothing or parts of
the body, causing injury. Electrical compo-
nents can cause shocks or can start fires.
Turn off the engine when performing mainte-
nance unless otherwise specified. Have a
Yamaha dealer perform service if you are not
familiar with machine service.
5KJ-62 (8 shou) 4/23/01 3:08 PM Page 2

8-3
EBU00258
Owner’s manual and tool kit
You are recommended to put this owner’s man-
ual and low-pressure tire gauge in the vinyl bag
and always carry them along with the owner’s
tool kit under the seat. The service information
included in this manual is intended to provide
you, the owner, with the necessary information
for completing your own preventive maintenance
and minor repairs. The tools provided in the
Owner’s tool kit are sufficient for this purpose,
except that a torque wrench is also necessary to
properly tighten nuts and bolts.
NOTE:
If you do not have a torque wrench available
during a service operation requiring one, take
your machine to a Yamaha dealer to check the
torque settings and adjust them as necessary.
we
q
1. Owner’s manual
2. Low-pressure tire gauge
3. Tool kit
1. Manuel du propriétaire
2. Manomètre basse pression pour pneus
3. Trousse à outils
1. Manual del propietario
2. Manómetro de baja presión
3. Juego de herramientas
5KJ-62 (8 shou) 4/23/01 3:08 PM Page 4

8-8 * It is recommended that these items be serviced by a Yamaha dealer.
** Lithium soap base greaseINITIAL EVERY
ITEM ROUTINE 1 3 6 6 1
month months months months year
Drive chain9Lubricate, check free play and alignment.
2222
9Replace if necessary.
* Drive chain guard
9Check wear and replace if necessary.222
and rollers
* Steering system9Inspect free play, clean and lubricate.**22222
* Front and rear
9Inspect and lubricate.**22222
suspension
9Inspect air pressure, wheel runout, and tire wear.
Tire, wheels9*Inspect bearings.22222
9*Replace bearings if necessary.
Throttle, control cable9Check routing and connection.
22222
9*Lubricate.
Outside nuts and bolts9Retighten.22222
Frame9Clean and inspect.2222
Lighting equipment9Inspect.22222
5KJ-62 (8 shou) 4/23/01 3:08 PM Page 9

8-53
4. Tighten the locknut.
w
Operating with improperly serviced or
adjusted brakes could cause loss of braking
ability, which could lead to an accident.
After servicing:
8Make sure the brakes operate smoothly
and that the free play is correct.
8Make sure the brakes do not drag.
Replacement of brake components requires
professional knowledge. These procedures
should be performed by a Yamaha dealer.
q
1. Adjusting nut1.Écrou de réglage1. Tuerca de ajuste
5KJ-62 (8 shou) 4/23/01 3:08 PM Page 54