2002 YAMAHA BANSHEE 350 tires

[x] Cancel search: tires

Page 13 of 389

YAMAHA BANSHEE 350 2002  Owners Manual Fittings and fasteners .........................5-19
Lights ..................................................5-21
Switches .............................................5-21
Tires ....................

Page 26 of 389

YAMAHA BANSHEE 350 2002  Owners Manual 1-3
q
we
q
GB
D
E
FI
NL
P
S Set with tires cold.
Bei kalten Reifen.
Ajuste con los
neumáticos en frío.
Pneus à froid.Impostare a pneumatici
freddi.
Wanneer de banden
koud zijn.
Regular com pneus
fr

Page 40 of 389

YAMAHA BANSHEE 350 2002  Owners Manual 2-13
8Never attempt to operate over large obstacles,
such as large rocks or fallen trees. Always fol-
low proper procedures when operating over
obstacles as described in this manual.
8Always be carefu

Page 90 of 389

YAMAHA BANSHEE 350 2002  Owners Manual 5-1
EBU00113
PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Brakes9Check operation, free play, fluid level and fluid leakage. 5-5 ~ 5-9
9Fill with DOT 4

Page 112 of 389

YAMAHA BANSHEE 350 2002  Owners Manual 5-23
EBU00158Tires
Always use the recommended tires.wUse of improper tires on this ATV, or opera-
tion of this ATV with improper or uneven tire
pressure, may cause loss of control, increas-
ing your r

Page 114 of 389

YAMAHA BANSHEE 350 2002  Owners Manual 5-25
8Check and adjust tire pressures when the
tires are cold.
8Tire pressures must be equal on both
sides.
3. Tire pressure below the minimum speci-
fied could cause the tire to dislodge from
the rim

Page 116 of 389

YAMAHA BANSHEE 350 2002  Owners Manual 5-27
EBU00159How to measure tire pressure
Use the low-pressure tire gauge.NOTE:
The low-pressure tire gauge is included as stan-
dard equipment. Make two measurements of the
tire pressure and use the

Page 138 of 389

YAMAHA BANSHEE 350 2002  Owners Manual 6-19
EBU00208To decelerate
When slowing down or stopping, release the
throttle and apply the brakes smoothly and
evenly. As you slow down, shift to a lower gear.
Be sure that the engine has sufficient
Page:   1-8 9-16 next >