2002 Peugeot 607 Dag tow

YOUR AT A GLANCE10
AUTOMATIC GEARBOX
'PORSCHE TIPTRONIC system'
The four speed automaticgearbox offers a choice between the comfort
of integral automatic operation, enhanced by a sport programme and
a snow programme, or the pleasure of manual gear changing.
Gear selection gate  Move the lever in the gate to select one of the functions.
Once the function is selected, the indicator light for that function is dis
played on the instrument panel screen.
S: sport programme.
: snow programme.
P ark: to immobilise the vehicle and to start the
engine, with the handbrake on or off.
R everse: to engage reverse; select this function
with the vehicle stationary and the engine at idle.
N eutral: to start the engine and to park, with the
handbrake on.
Note : if position Nis engaged by mistake while
the car is moving, allow the engine to return to
idling speed before engaging function Dto accel
erate.
D rive: for automatic gear changing
M anual: for manualgear changing.
To change the four gears manually:
 Push the lever to the + symbol to change up to
the next gear and pull it towards the symbol to
change down a gear.
Note: the S (sport) and
(snow) programmes do
not operate in manual mode.
Moving Off
With the engine running, to move
off from position P:
 it is essential to press the
brake pedal to exit position
P,
 select function R, D or M, then
gradually release the pressure
on the brake pedal; the vehi
cle will move off immediately.
You can also move off from posi
tion N:
 release the handbrake, with
your foot on the brake,
 select function R, D or M, then
gradually release the pressure
on the brake pedal; the vehi
cle will move off immediately.
WARNING
When the engine is idling with
the brakes not applied, if function
R , D or M is selected, the vehicle
moves without the accelerator
being pressed.
For this reason, do not leave
children unsupervised inside
the vehicle, with the engine
running.
When maintenance operations
have to be carried out with the
engine running, apply the hand
brake and select posi
tion P.
122

ARDUOUS CONDITIONS OF USE
• Continuous doortodoor use.
• Town use (e.g. taxi).
• Repeated short journeys, with the engine cold at low te mperatures.
• A prolonged stay under the following conditions: – countries with temperatures often above +30 °C,
– countries with temperatures often below –15 °C,
– countries with a dusty atmosphere,
– countries whose lubricants or fuels do not conform to our recommend ations.
Recommendations: – replace the air filterevery 25,000 miles (40 000 km) for petrol engines and every 28,000 miles (45 000 km) for diesel
engines, – to replace the timing belt: contact a PEUGEOT dealer.
PEUGEOT SERVICING
24

INSTRUMENTS AND CONTROLS35
Engine diagnostics warning light
This is linked to the warning light on the instrument pane
l.
Display of this warning light is accompanied by an audible si gnal and the message 'Engine emission control sys
tem faulty' on the multifunction display.
If it flashes when the engine is running, this indicates a malfunction in the injection, ignition or emission control system. There
is a risk of damage to the catalytic converter (petrol engine onl y).
Contact a PEUGEOT dealer as soon as possible.
Bulb blown warning light
Display of this indicator light is accompanied by an audible signal and the message 'Bulb... faulty' on the multifunc
tion display, indicating the faulty bulb: a bulb in th e dipped beam lights, the side lights, the direction indi cator lights
(except side repeaters) or the brake lights (except the central brake light).
Change the faulty bulb.
Windscreen/headlamp wash reservoir warning light
Display of this warning light is accompanied by an audible si gnal and the message 'Screenwash low'on the multi
function display.
Fill the windscreen/headlamp wash reservoir the next time you st op.
Particulate emission filter saturation warning light (diesel engine)
Display of this warning light is accompanied by an audible si gnal.
When it occurs with the engine running, this indicates the start of saturation of the particulate emission filter (excep
tionally long periods of town type driving conditions: reduce d speed, long tailbacks...).
To regenerate the filter, you are advised to drive as soon as possible and when traffic conditions permit at a speed of 35 mph
(60 km/h) or more for at least five minutes (until the warning li ght goes out).
If the light remains on, contact a PEUGEOT dealer.
Note: After prolonged operation of the vehicle at a very low speed or at idle, you may sometimes notice steam coming from
the exhaust during acceleration. This has no effect on the p erformance of the vehicle or on the environment.

YOUR 607 IN DETAIL
74
Main menu
Switch on the ignition.
Press the 'Menu'button to access the ' Main menu'.
Select a function by turning the dial, then confirm (press
the dial). The
''Navigation/Guidance'' menu offers various possibil
ities for activating guidance:
– by inputting the address of a new destination,
– by selecting a service (hotel, station, airport...) available in a town,
– by selecting an address stored in one of the two directo ries,
– by resuming previously interrupted guidance, Two messages may be displayed, depending on the pre
vious action: 'Resume guidance' or 'Stop guidance'.
Navigation / guidance
Following selection of the 'Navigation / guidance'menu,
a screen warns you about the use of the navigation sys
tem. Please observe the instructions.
Press the dial to access the next screen.

YOUR 607 IN DETAIL
75
Inputting a new destination
The last town input is displayed.
The 'Change' function allows the town input to be com
pletely cleared.
Note: Inputting the first letter of the name of the chosen
town will cancel the name of the town displayed.
To input the name of another town , select each letter
using the dial, then confirm (by pressing the dial) for each
letter.
If an error is made, the 'Correct' function allows the last
letter input to be cleared.
The 'List' function indicates, as the name is input, the
number of towns starting with the same letters. Activation
of this function allows a town to be selected from the list .
When the list contains fewer than 5 names, these names
are automatically displayed.
Select a town then confirm (press the dial).
When the complete name of the town is displayed, select
the 'Validate' function, then press the dial.
Note: after confirmation of a letter, only those letters which
can make up an existing name in the data base are shown. Input the
name of the street . Select the 'Validate'func
tion, then press the dial.
Note: guidance can be activated as soon as the town is
input, without the street name or number. To do this, con
firm or select the 'Town centre' function.
Input the street number . Select the 'Validate'function
then press the dial.
Note: guidance can be activated as soon as the town and
street are input, without details of the number. To do t his,
select the 'Validate' function.

YOUR 607 IN DETAIL
77
Selecting a service
The last destination address input is displayed.
There are 3 ways of defining the location in which you wish
to obtain a service:
– repeat the last address input using the'Validate'func
tion,
– input the name of a new town then input the street (o r the
'Town Centre' function), using the 'Change'function,
– automatically input your current location by means of the 'Current location' function.
After validating the address, scroll through the list of ser
vices by turning the dial, then press the dial to select one
of them.
Note:if the service selected is not available at the pro
grammed location, a message (by means of a superim
posed display) will indicate this.
The cursor on the lefthand side of the screen indicates
your position in the list.
The address of the service required is displayed.
Information on the righthand side of the screen (e.g. 1/50)
indicates whether there are several establishments (50
maximum) within a radius of 30 miles (50km) of the
address selected, as the crow flies.
Use the ' Next'or 'Previous' functions to consult the list
offered.
When the establishment of your choice is displayed, select
the 'Validate' function, then press the dial. If necessary,
select a guidance criterion.
Guidance begins, follow the instructions.

Access a list by the selecting the
"List"function when inputting the
town or road. Select a name then
confirm.
Select a name then confirm.
When the required information has
been given, confirm so that you can
go on to the next.
YOUR 607 IN DETAIL
82
Selecting a destination
The menu ''Selecting a destina
tion'' offers various ways for reach
ing a destination:
– by inputting an address (country, area...),
– by selecting a service (airport, hotel, restaurant, bank),
– GPS details,
– most recent destinations,
– personal directory,
– professional directory.
General operation
When the details are completed for
one of the above options, you can:
– confirm to start guidance,
– store the address of the destina tion in one of the two directories
(see Paragraph 'Personal/ Profes
sional directory'),
– press the 'ESC' key to finish
inputting modifications. Inputting an address
The last guidance address input is
displayed.
To input a new address, complete
the following details: the country, the
area, the road and the road number.
For each of these, select each letter
using the dial, then confirm each
time.
If an error is made while inputting,
the
'Correct' function allows the last
letter input to be cleared.

YOUR 607 IN DETAIL
83
Selecting a service
To select a service: • select the location. The last destination appears; you can
change it,
replace it with the current location, by confirmation of the corresponding button),
• select 'OK'to look at the list of services for the type and
location selected,
• select a type of service from the list (hotel, service sta tion, restaurant etc.)
• select 'OK' to activate guidance towards the service
selected. GPS details
Input the details of your destination location (longitude
and
latitude shown in degrees, minutes and seconds) to acti
vate guidance to this location.
Most recent destinations
With the dial, select the destination required from the li st,
then confirm.
Personal /Professional directory
Select one of the two directories to choose a destination
address from the list.