2002 Peugeot 607 Dag display

YOUR 607 IN DETAIL
78
Selecting a destination stored in the memory
Using the dial, select the directory in which the address
you are looking for is stored, then press the dial.
The addresses stored in the memory are displayed.
The cursor on the lefthand side of the screen indicates
your position in the list. Make your selection by scrolling
through the list using the dial, then press the dial. The com
plete address is displayed. Select the 'Validate'function,
then press the dial.
If you wish, select a new guidance criterion.
Guidance begins, follow the instructions. Storing an address in a directory.
When a new address is input, you can store it in the mem
ory by selecting the 'Archive' function.
Input the address. If the details already exist for a differe nt
address, you can replace the old address (after removing
it) with a new one.
Select the Personal or Professional directory, then press
the dial. The address is then stored in the directory of your
choice (storage capacity of 100 addresses).

YOUR 607 IN DETAIL
79
Navigation options
From the main menu, 'Navigation options'gives you
access to the following programmes:
– management of the directories. This allows details of a stored address to be renamed or deleted, by selecting
the directory and the details to be modified,
– voice synthesis volume adjustment, Once the function has been selected, adjust the volume
of the voice synthesis using the dial, the audio system
button or the steering wheel stalk, then confirm.
Note: the voice synthesis volume can also be adjusted
during a message using the audio system button or the
steering wheel stalk.
– deletion of all data stored in both directories. Guidance tools
Access to the
'Guidance tools' menu is by pressing the
dial at any time during guidance.
It enables:
– the current guidance criterion to be changed,
– the programmed destination to be displayed or changed,
– the voice synthesis volume to be adjusted (see ''Navi
gation options'' ' paragraph),
– the current guidance to be stopped.

Satellite navigation system
with colour screen.
Updating the software
When you receive the system
update CDROMs:
– eject the mapping CDROM from the drive,
– insert the software CDROM in the drive; after a few seconds the
screen 'management of software
configuration of the system
appears,
YOUR 607 IN DETAIL
80
– compare the versions installed(System) with those of the CD
Rom in the drive; if the CDROM
version is later than the version
installed, load the CDROM by
confirming "YES",
– when the message "Software Loading End Eject CD" appears,
remove the software CDROM and
insert the mapping CDROM in its
place.
General remarks regarding the display
When using context menus, the
functions are presented in various
ways:
– Function selected (text on coloured background),
– Function accesible (black text),
– Function inaccesible in this situa tion (text on grey background). During offthemap guidance, the
screen displays the following various
information, depending on the
manoeuvres to be carried out:
1
– Next road to be taken,
2 – Estimated time of arrival,
3 – Remaining distance to be trav
elled,
4 – Diagram of the next crossroads
and direction to be taken,
5 – The direction to your destination,
6 – Street taken,
7 – Symbol showing voice synthesis
status,
8 – Distance remaining before the
next manoeuvre,
9 – GPS status symbol.

YOUR 607 IN DETAIL
81
Main menu
–Switch on the ignition,
– Place the mapping CDROM in the drive (if absent),
– Press the 'Menu'button to access
the Main menu ,
– Select one of the following applica tions by turning the dial, then con
firm:
• General information (see section on ''Multifunction display &
Colour screen'' ),
• Navigation / Guidance ,
• Map. Navigation / guidance
The
''Navigation/Guidance'' con
text menu offers the following possi
bilties:
– selecting a destination,
– guidance using a map,
– changing the route,
– details of the route,
– geographical information,
– guidance options,
– stopping/resuming guidance.

Access a list by the selecting the
"List"function when inputting the
town or road. Select a name then
confirm.
Select a name then confirm.
When the required information has
been given, confirm so that you can
go on to the next.
YOUR 607 IN DETAIL
82
Selecting a destination
The menu ''Selecting a destina
tion'' offers various ways for reach
ing a destination:
– by inputting an address (country, area...),
– by selecting a service (airport, hotel, restaurant, bank),
– GPS details,
– most recent destinations,
– personal directory,
– professional directory.
General operation
When the details are completed for
one of the above options, you can:
– confirm to start guidance,
– store the address of the destina tion in one of the two directories
(see Paragraph 'Personal/ Profes
sional directory'),
– press the 'ESC' key to finish
inputting modifications. Inputting an address
The last guidance address input is
displayed.
To input a new address, complete
the following details: the country, the
area, the road and the road number.
For each of these, select each letter
using the dial, then confirm each
time.
If an error is made while inputting,
the
'Correct' function allows the last
letter input to be cleared.

Map
The 'Map' context menu offers various possibilities for fol
lowing the route defined by the navigation:
– centering the vehicle,
– journey mode,
– zoom,
– selecting,
– navigation / guidance,
– map configuration,
– stopping / resuming guidance.
The guidance function offers two journey modes:
– manual mode (see 'Movement mode')
– automatic mode (see 'Centering the vehicle' ).Centering the vehicle
This function permits activation of the automatic map
movement mode. The map moves over the screen, follow
ing the direction of the vehicle. Depending on the pro
gramming, the top of the screen represents either the
North or the direction followed by the vehicle.
The vehicle is shown as a symbol in the centre of the
screen.
Movement mode
Press the dial so that the map moves in the direction
shown by the pointer. The pointer is in the centre of the
screen and the map slides underneath it.
Rotating the dial lets you select one of 16 different di
rec
tions (North, N/NE, NE, E/NE, East, E/SE, SE, S/SE,
South etc.).
When moving, it is possible to change the direction select
ed.
Zoom
This function allows the scale of the map displayed to be
enlarged or reduced.
Selecting
This function opens the screen which allows selection of
the destination on the map.
It enables guidance towards this destination to be activate d.
Navigation / guidance
This function allows you to return to the 'Navigation/
Guidance' application off the map.
YOUR 607 IN DETAIL
84

Map configuration
This function offers various possibilities to optimise and
enhance the display of the route:
– map orientation,
– type of services displayed,
– selection of scale.
Map orientation
This function allows orientation of the map to be selected:
North or according to the direction of the vehicle.
Note: the "vehicle orientation" option is only active if the
display scale is less than or equal to 1km.
Types of services displayed
This function allows the required service to be displayed.
From the list presented, select the service(s) required (for
insertion), the service(s) not required (for deletion), or
choose 'Any'(parking, hotel, restaurant, service station,
cinema...).
Changing the route
This function allows you, for example, to avoid a tailback
on the route which has been worked out.
Using the 'Navigation/Guidance' context menu, or by
holding down the last voice message recall control, you
can introduce a change to the route that had been worked
out, at any time during guidance.
This change occurs on the stretch between your present
position and a point located at a distance which has to b e
input, using the initial route.
Enter a distance between 1 and 10 km, using the alphanu
meric keypad, then confirm.
The system takes this change into account and suggests
new guidance, having invalidated the section selected. Details of the route
At all times during guidance, the submenu
'Details of the
route' gives you access to the following functions:
– destination selected,
– see the places to be travelled through (display of roads, streets and towns to be passed),
– see the route on the map (change to map display).
A pointer located on the side indicates your position in rela
tion to the route.
Geographical information
The submenu 'Geographical information' presents the
GPS information regarding the position of the vehicle.
YOUR 607 IN DETAIL
85

YOUR 607 IN DETAIL
90
1 Driver's side
adjustment
2 Passenger's side adjustment
The required value is
displayed (from 15 to
30: comfort value = 22).
 Press the corresponding top and
bottom arrows to adjust.
3 Driver comfortprogramme
4 Passenger comfort
programme
 Press the 'AUTO'button(s).
The system adjusts automatically to
the required value .
It also controls the air distribution,
flow and intake so that there is suffi
cient air circulation in the passenger
compartment.
The air flow (fan) symbol and the
'AUTO' symbols are displayed.
Note: when programme 5or function
11 (following pages) are being used,
the 'AUTO' passenger button does
not operate; it causes temporary
flashing of button 5or 11 indicator
light.
AUTOMATIC AIR CONDITIONING
Located on the centre console, the control panel is between
the multifunction
display and the audio system.
The driver and front passenger can each adjust the temperature a nd the air dis
tribution, to suit their requirements.
Do not cover the sunshine / brightness sensor located i n the centre of the
fascia. It helps to regulate the air conditioning, automati c switching on of
the lights and the automatic adjustment of the instrument pane l bright
ness.