Page 86 of 166

SEATS Manual adjustment of the front seats
1 - Forwards-backwards adjustmentLift the lever and slide the seat forwards or backwards.
2 - Seat cushion angle adjustment Lift the lever to set the best angle.
3 - Driver's seat height adjustment Pull the telescopic handle forwards and pivot it up or down.
4 - Seat back angle adjustment Turn the knob to obtain the best angle.
5 - Head restraint height and tilt adjustment
The settting is correct when the top of the headrestraint is level with the top of the head.
To raise the head restraint, pull it upwards.
To lower the head restraint, it is necessary to pushsimultaneously:
- the button on the left-hand side on top of the seat back,
- the head restraint downwards. The head restraint has a frame with notches which prevents it from dropping down (safety device in caseof impact).
To remove the head restraint, press the tab.
Warning: never drive with the head restraints
removed. They should be in place and correctly adjust- ed.
6 - Front armrests The front armrests can be folded or removed.
To remove them, press the button between the armrest and the side of the seat and pull the armrest.
YOUR 406 IN DETAIL
114
Page 89 of 166
REAR SEATS Rear seats (saloon)Before moving the seats, to avoid damage to the seatbelts, carefullyplace them to the side of the seatback (for side seat belts) and gentlylower the seat to avoid blocking thecentre belt. The seat back folds down in two sec- tions.To fold down the seat back The unlocking controls are located in the boot. Pull the control corresponding to the part of the seat back that you wish tofold down. When returning the seat back to its original position, for your safetymake sure that it is correctly locked. Ski flap Lower the arm rest to access the ski flap. Open the flap from the boot.
YOUR 406 IN DETAIL
117
Page 90 of 166
Rear seats, estate
To fold down the rear seat:
- remove the head restraints by pressing the lug.
- tilt the seat cushion against the front seats, using the strap. - secure the side seat belt buckles
on the coat hooks when manoeu-vring the seat back to avoid anyrisk of the straps being damaged.
-unlock the seat back by pressing but-ton 1. The red marker Aappears.
- fold down the seat back gently to
avoid blocking the centre belt.
When returning the seat back to theupright position, ensure that it is cor-rectly locked (red marker Ano longer
visible). When driving with rear passengerswith one third of the seat foldeddown, release the central seat beltbuckle from its catch.
YOUR 406 IN DETAIL
118
WARNING
Do not remove
the seat back of the estate’s one-piece rear seat.
This seat is fitted
with return springs which can cause injury.
Contact a PEUGEOT dealer if you wish
to remove the seat back.
Page 94 of 166

YOUR 406 IN DETAIL
121
CHILD SEATS Although one of PEUGEOT's main concerns when designing your vehicle, the safety of your children also depends on you.
For maximum safety, please follow these precautions:-All children under the age of 10 must travel in a special approved child seat*, adapted to their weight, in a seat fitted with a seat belt.
- Front passenger seat*: children under the age of 10 must not travel in the forwards facing position**. The rearwards facing position is permitted. In this position, it is compulsory to disarm the passenger air bag.
After carrying out numerous tests, PEUGEOT recommends the following systems: Up to 18 months (up to 13 kg)
" Römer Babysure": installed with its back to the engine in the front or in the rear using a three-point seat belt. In the front, the passenger seat must be in the 'mid-way' position on the slide.
From 9 months to 3 or 4 years (9 to 18 kg) "Römer Prince": installed in the rear using a three-point seat belt. For the safety of your child, the seat and the restraining cushion must never be separated.
From 3 to 6 years (15 to 25 kg) "Römer Vario'': installed in the rear with a three point seat belt.
* According to current legislation in the country of destination.
** Unless the rear seats are already occupied by other children or the rear seats cannot be used (because they are missing or folded down). In this case, adjust the front passenger seat to the rear-most position and leave the air bag active.
1
2
3
Page 154 of 166
MAINTENANCE OF YOUR 406
53
HEAVY DUTY LUGGAGE NET (Estate) The heavy duty luggage net may be installed behind the front seats (in the front position)or behind the rear seats (in the
rearposition).
Luggage net fixings in the front position
-Fold down the rear seats (see section on 'Rear seats, Estate').
-Open the corresponding top fixings.
-Detach the anchor points.
-Locate the ends of the metal bar in these fixings.
-Fix the two hooks of the inside straps of the net in the stowing holes provided on the frame brackets of the rearseats.
-Tighten the two straps. Luggage net fixings in the rear position
-Remove the rear parcel shelf.
-Open the corresponding top fixings.
-Detach the anchor points.
-Locate the ends of the metal bar in these fixings.
-Fix the two hooks of the inside straps of the net in the
stowing holes on the floor.
-Tighten the two straps.
Note: The stowing rings are located perpendicular to the
corresponding top fixings.
FRONT POSITION REAR POSITION