Page 5 of 137
6YOUR 307 SW AT A GLANCE
FRONT SEATS 1. Forwards/backwards adjust-
ment.
2 . Seat back angle adjustment.
3 . Driver or passenger seat
height adjustment.
4 . Front removable armrest
5 . Head restraint height and
angle adjustment.
To raise or lower the head restraint, pull it forwards, sli-ding it at the same time.
Never drive with the head
restraints removed.
6. Storage drawer
7 . "Aviation" style table.
56
Page 6 of 137
Moving an additional seat: ➜seat back angle adjustment (1),
➜ head restraint height adjustment (2),
➜ folding down (3),
➜ removal, refitting (4).
7YOUR 307 SW AT A GLANCE
REAR SEATS Moving a side seat: ➜forwards/backwards adjustment (1),
➜ seat back angle adjustment (2),
➜ head restraint height adjustment (3),
➜ folding down (4),
➜ removal, refitting (5). Moving the centre seat: ➜
forwards/backwards adjustment (1),
➜ seat back angle adjustment,table position (2),
➜ head restraint height adjustment (3),
➜ folding down (4),
➜ removal, refitting (5).
58
Page 7 of 137
8YOUR 307 SW AT A GLANCE
SEAT CONFIGURATIONS
67
5 seats Loading bulky items
5 seats with centre seat in boot 6 seats with an additional seat
Transportation of long objects with tray position 7 seats with two additional seats
Page 51 of 137
YOUR 307 SW IN DETAIL51
VENTILATION 1. Windscreen de-icing or demisting vents.
2. Front window de-icing or demisting vents.
3. Side vents.
4. Centre vents.
5. Air outlet to front footwells.
6. Air outlet to rear footwells.
Advice on operation Place the air flow control at a level sufficient to ensure correct renewal of air in the passenger compartment. The ''OFF''
position cuts off all the air circulation in the passenger compartment. Note : only use the ' 'OFF''position occasionally (risk of condensation).
For perfectly even air distribution, take care not to obstruct the exterior air intake grilles, the vents and the air ducts und er
the front seats, as well as the air extractor located in the boot. Check that the pollen filter is in good condition.
Page 56 of 137
FRONT SEATS
1. Forwards/backwards adjustment Lift the control and slide the seat forwards or backwards.
2. Seat back angle adjustment Push the handle towards the rear.
3. Driver's or passenger's seat height adjustment Pull the handle upwards or push it downwards as many times asnecessary to obtain the requiredposition.
4. Armrests These can be folded down andare removable.
To remove them, press the but- ton located between the armrestand the side of the seat and pullit.
YOUR 307 SW IN DETAIL
56
Page 59 of 137

REAR SEATS Forwards-backwards adjustment* Lift the bar Aand slide the seat for-
wards or backwards.
From the 3rd row, you can pull thestrap Band slide the seat forwards
or backwards.This manoeuvre makes it easier for
passengers to exit the 3rd row, whenthe 2nd row seat is folded.
Seat back angle adjustment Pull one of the two straps C(side or
additional seat) or the strap E(centre
seat) and adjust to the required angle. Release the strap to lock.Note: two straps Cor one strap E
can also be found behind each seat* for folding the seat back onto thecushion from the 3rd row or the boot. * Excluding additional seat. Folding a side seat: access to the 3rd row: Place the head restraint in the low position. Push the seat back fully
using bar
A .
Fold the seat back onto the cushion using the strap C.
Note: you can lock the seat back in
this position (e.g. for removal) bypressing down on it. Push control Dupwards to release
the rear feet.Place the seat in the "folded" posi- tion. exit from the 3rd row or folding from the boot: Place the head restraint in the low posi- tion. Push the seat back fully
using the
strap B.
Fold the seat back onto the cushion using the strap C.
Note: you can lock the seat back in this
position (for removal) by pressing downon it. Push the control Dupwards to release
the rear feet.Place the seat in the folded position.
YOUR 307 SW IN DETAIL
58
While driving attach the retaining strap (contained in the side seat storage pocket):
- on the 2nd row: on one side, to the carrying handle H and on the other
side, to the grab handle,
- on the 3rd row: on one side, to the carrying handle H and on the other side, to the rear armrest grab handle.
Page 60 of 137

YOUR 307 SW IN DETAIL59
Centre seat table position Place the head restraint in the low position. Fold the seat back onto the cushion using the strap E.
You now have a small table with fourcan holders, two pen holders and a
document holder.
Folding the centre seat Place the head restraint in the low position. Push the seat back full y using the
bar A.
Fold the seat back onto the cushion using the strap E.
Note: you can lock the seat back in
this position (for removal) by pres-sing down on it. Push control Dupwards to release
the rear feet.Place the seat in the folded position. While driving, attach the retaining strap (contained in the storagepocket of one of the front seats)on one side, to the carrying hand-le H and on the other side, to thegrab handle. Folding an additional seat Place the head restraint in the low position. Fold the seat back onto the cushion sliding the strap
C downwards, then
pulling it forwards or backwards. Note: you can lock the seat back in
this position (for removal) by pres- sing down on it. Push the two levers Fupwards to
unlock the rear feet.Place the seat in the folded position. While driving, attach the retaining strap (contained in the storagepocket of the additional seat) onone side, to the carrying handle H
and on the other, to the rear arm-rest grab handle.
Page 61 of 137

Removing a seat Fold the corresponding seat.
Tilt the two red levers Gunder the
seat to release the front feet.Lift it and carry it using the carrying handle H.
In the 3rd row, position the fixingpoint closers to obtain a flat boot
floor. Refitting a seat
In the 3rd row, first remove the floor fixing point closers using a screwdri-ver or a coin. Check that nothing is obstructing the floor fixing points thus pre-venting correct locking of the seatfeet. Carry the seat using the carrying handle
H.
Position the front feet in the securingpoints.
Locked Unlocked Push control Dupwards to check
that the rear feet are unlocked.
Tilt the folded seat backwards.
The rear feet lock automatically, as do the two red levers G. Check that the seat is locked cor-
rectly. Lift the seat back, first releasing it by pulling the strap
C (side or additional
seat) or E(centre seat).
YOUR 307 SW IN DETAIL
60
Only lock the seat back on the cushion occasio-
nally, to avoid undue wearof the seat covers.
Avoid placing luggage on foldedseats. Never use the adjusting straps to remove, refit or carry a seat.