2002 Peugeot 307 SW Turbo

Zero re-set
Your PEUGEOT dealer carries out this operation after each service.
However, if you carry out the service yourself, the re-set procedure is asfollows: Switch off the ignition,
Press and hold the trip recorder re-set button,
Switch on the ignition.
The display begins a countdown. When the display shows 0, release the button; the service symbol disap-pears. Important: after this operation, if you
wish to disconnect the battery, lock the vehicle and wait for at least fiveminutes, otherwise the zero re-setwill not be registered. MAINTENANCE OF PARTS SUBJECT TO WEAR and a check of consumables Certain essential components on your vehicle are subject to checks or replace- ment at specific intervals:
- The
brake fluid is to be replaced at a maximum of every 36,000/40,000 miles
(60 000 km) or every two years.
- The pollen filter must be checked at each service by a PEUGEOT dealer
(services and intermediate visits) or more often, depending on the environ-
ment (dust, pollution, etc.)
- For replacement of the timing belt,consult your PEUGEOT dealer.
- For the 2 litre HDI turbo diesel engine (110 bhp) , maintenance of the
particulate emission filter and topping up of the additive reservoir must be
carried out at a maximum of every 48,000 miles (80 000 km) by a PEUGEOT
dealer.
- Air bags and pretensioning parts on seat belts must be replaced every
10 years.
- The check on tyre inflation pressure must be carried out cold at least once
a month.
PEUGEOT SERVICING 21

(1) Minimum grade: Petrol engines ACEA A3 and API SH/SJ; Diesel engines ACEA B3 and API CF/CD. ACEA= Association des Constructeurs EuropŽens Automobiles (Association of European Automobile Manufacturers).
API = American Petroleum Institute. If oil is used which does not conform to the ACEA A3-B3 standards, this requires the "Arduous Conditions" servicing schedule to be followed, which involves shorter intervals between services.
*This Fuel Economy oil can only be used in engines designed for its use.
Use 5W40 oil only for HDI Turbo DIesel engines fitted with a particulate emission filter.
26TRADE NAMES OF APPROVED AND RECOMMENDED ENGINE LUBRICANTS IN EUROPE (1)
PETROL DIESEL DIESEL PETROL

PRACTICAL INFORMATION
104
2 LITRE HDI TURBO DIESEL
ENGINE (90 bhp/110 bhp) 1 -
Power steering reservoir
2 - Windscreen wash reservoir 3 -
Coolant reservoir
4 - Brake fluid reservoir
5 - Battery
6 - Fuse box 7 -
Air filter
8 - Dipstick
9 - Engine oil filler cap
10 -Priming pump

TECHNICAL DATA125
3HRHYB 3HRHSB
Manual Manual
(5 speed) (5 speed) DIESEL ENGINES
ENGINES 2
LITRE TURBO HDI 90 bhp 2 LITRE TURBO HDI 110 bhp
Cubic capacity (cm 3
) 1 998 1 997
Bore x stroke (mm) 85 x 88 85 x 88 EU standard maximum
power (kW) 66 79
Maximum power at engine
speed (rpm) 4 000 4 000
EU standard maximum torque (Nm)205250
Maximum torque at engine speed (rpm)1 9001 750
Fuel Diesel Diesel
Catalytic converter Yes Yes
Particulate emission filter Non Yes
UNIT CAPACITIES (in litres)
Engine (with cartridge replacement) 4,5 4,5
Gearbox-Final drive 1,9 1,85
MODELS Model codes GEARBOX

Consumption In accordance with directive 93/116 [In MPG (litres/100km)]
Engine Gearbox Model Circuit Circuit Circuit Emission of
codes Urban Inter-urban Mixed CO 2by
3C...3A... weight (g/km)
1,6 litre 16V Manual 3HNFUB 28.5 (9.9) 44.8 (6.3) 36.7 (7.7) 178
1,6 litre 16V Automatic 3HNFUE 24.9 (11.2) 44.1 (6.4) 34.0 (8.3) 194
2 litre 16V Manual 3HRFNC/IF 24.6 (11.5) 44.8 (6.3) 24.0 (8.3) 194
2 litre 16V Automatic 3HRFNE 21.6 (13.1) 43.5 (6.5) 32.1 (8.8) 206
2 litre Turbo HDI 90 hpManual3HRHYB 39.8 (7.1) 62.8 (4.5) 52.4 (5.4) 143
2 litre Turbo HDI 110 hpManual3HRHSB 39.3 (7.2) 64.2 (4.4) 52.4 (5.4) 143
TECHNICAL DATA
126
Fuel consumption values correct at time of printing.