2002 Mercury Villager Owner's Manuals

Page 65 of 256

Mercury Villager 2002  Owners Manuals If unusual conditions exist (i.e.-window fogging, etc.), the manual
override controls allow you to select airflow locations and the fan control
allows you to adjust fan speed as necessary.
Temperature

Page 66 of 256

Mercury Villager 2002  Owners Manuals The display will showto
indicate manual fan operation.
To return to automatic fan operation, press AUTOMATIC.
Manual override controls
The override controls allow you to:
•manually control where the

Page 67 of 256

Mercury Villager 2002  Owners Manuals •(Defrost) - Distributes outside air through the windshield
defroster ducts. It can be used to clear ice or fog from the windshield.
If the temperature is about 4°C (40°F) or higher, the air condi

Page 68 of 256

Mercury Villager 2002  Owners Manuals During periods of high humidity, vapor may be emitted from the air
outlets when using the A/C system with outside air. This can be
corrected by using MAX A/C to cool the vehicle.
Rear seat heating
Rea

Page 69 of 256

Mercury Villager 2002  Owners Manuals •Do not place objects under the front seat that will interfere with the
airflow to the rear seats.
•Remove any snow, ice or leaves from the air intake area at the base of
the windshield.
•Do not

Page 70 of 256

Mercury Villager 2002  Owners Manuals The rear A/C fan speed control allows rear passengers to control the
volume of air that is distributed from the rear registers.
The rear seat A/C system is controlled from the main climate control
sys

Page 71 of 256

Mercury Villager 2002  Owners Manuals Turning the Rear A/C on
1. Set the main climate control rear fan control to Rear A/C; set the
mode selector to any position (other than OFF), and depress the A/C
control.
2. Set the fan speed on the R

Page 72 of 256

Mercury Villager 2002  Owners Manuals You can also turn the Rear Fan Control on the main climate control
system to Rear A/C and turn the Rear A/C Fan Control to 0.
For maximum cooling for the front seat passengers, set the rear fan
switch