2002 MERCEDES-BENZ M-Class lock

66
Introduction AudioTe l e p h o n eNavigation Index
System settings
Switching telephone operation on and off
Press , the menu for entering the unlock code will
appear.Entering the unlock code
Use the number keys ... to enter the unlock-
code. Asterisks will appear in place of the digits in the
input line.
If the input code is correct and the phone is registered
in a network, the phone is ready for use.
Switching off the telephone system
The telephone will change to sleep mode if you switch to
an audio mode, navigation mode or switch off the MCS
system.
P82.85-7139-26
Telephone

67
Introduction AudioTe l e p h o n eNavigation Index
System settings
Note:
Your unlock code prevents unauthorized persons from
using your telephone. Be sure to memorize this code
carefully. The code is a three digit number.
If you enter an incorrect code, the system returns to the
menu for entering the unlock code.
The unlock code must be entered when the telephone is
switched on for the first time (if phone is in lock mode),
but not if you switch to it from another system (i.e.
radio).
The emergency number programmed in memory loca-
tion 1 can be used even if the unlock code has not been
entered.
“NO SERVICE” - this message will appear in case the
phone is not registered in a network or the network is
no longer receivable because of bad receiving condi-
tions. In this case, the emergency call number cannot be
used.If the telephone is ready for operation “READY” will
appear. In the display the received signal is indicated by
1 to 5 bars, with 5 indicating a strong signal. If you are
not in a home network, the roaming indicator “R” will
be shown.
Outgoing calls, page 70.
P82.85-7140-26
Telephone

69
Introduction AudioTe l e p h o n eNavigation Index
System settings
Setting volume for hands-free operation:
Raising the volume - turn rotary/push-button (1) to the
right (clockwise)
Lowering the volume - turn rotary/push-button (1) to
the left (counterclockwise)Accepting an incoming call and using the mobile
cellular telephone handset
Removing the telephone from its cradle will switch
hands-free operation off.
1 Observe all legal requirements.
P82.85-5066-26
G
Wa r n i n g !
Please be sure to pay attention to the traffic situa-
tion at all times. Use the mobile cellular telephone
1
only when the traffic situation allows.
Some jurisdictions prohibit the driver from using a
cellular telephone while driving a vehicle. Whether
or not prohibited by law, for safety reasons, the
driver should not use the cellular telephone while
the vehicle is in motion. Stop the vehicle in a safe
location before answering or placing a call.
Telephone

76
Introduction AudioTe l e p h o n eNavigation Index
System settings
Quick-dialing
When the main telephone menu is displayed press one
of the number keys ... (e.g.: ) for longer
than 2 seconds.
The phone number or the name stored at this memory
location will appear on the screen.
When the call is initiated, the call time will appear in
the display.
End the call:
Press .Emergency call
Important!
If you press and press the number stored in
memory location 1 (default is 9-1-1) will be dialed.
Pressing and holding for more than 2 seconds will
also initiate the call.
The 9-1-1 emergency call system is a public service.
Using it without due cause is a criminal offence.
The emergency call will be placed as long as the corre-
sponding mobile communications network is available.
To do this, switch the telephone on, if you have not
already done so.
Emergency call will also be placed, if the phone is
locked.
Telephone

78
Introduction AudioTe l e p h o n eNavigation Index
System settings
Begin dialing:
After pressing longer than 2 seconds the number
which is stored will appear in the display.
End the call:
Press .Note:
To use this function you must ensure that the number
stored in memory location 1 is the number to be dialed
in case of emergency.
This function can also be used, if the telephone is
locked.
Telephone

131
Introduction Audio TelephoneNavigationIndex
System settings
The maneuver screen for the selected maneuver
appears on the display.
To r e t u rn to t h e G u i d a n c e mode press the softkey
“MAP” or wait 10 seconds, then the system will auto-
matically return to the Guidance mode.Road obstructed
If you encounter a road block or would like to avoid con-
struction, you may choose a different routing option, or
choose to avoid certain roads. This selections only func-
tions during route guidance.
Press .
Select “Route” with the joystick and press .
The Route Select menu appears. Select “Avoid Road”
with the joystick and press .
P82.85-6560-26
Route guidance