2002 MERCEDES-BENZ CLK430 warning light

229 Malfunction and indicator lamps
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car care Index Electronic stability program (ESP) — warning lamp
The yellow ESP warning lamp in the
speedometer dial comes on with the
electronic key in steering lock position 2.
It should go out with engine running.
See page 218 if the warning lamp lights up or flashes
when the vehicle is moving.
BAS / ESP malfunction indicator lamp
The malfunction indicator lamp for the ESP
is combined with that of the BAS.
The yellow BAS/ESP malfunction indicator
lamp in the instrument cluster comes on with the
electronic key in steering lock position 2. It should go
out with the engine running.
If the BAS/ESP malfunction indicator lamp remains
illuminated with the engine running, see page 214 for
notes on the brake assist (BAS) and page 218 for notes
on the electronic stability program (ESP).ABS malfunction indicator lamp
The ABS malfunction indicator lamp in the
instrument cluster comes on with the
electronic key in steering lock position 2 and
should go out with the engine running.
When the ABS malfunction indicator lamp and the
malfunction message in the instrument cluster remains
illuminated while the engine is running, it indicates
that the ABS has detected a malfunction and has
switched off. In this case, the brake system functions in
the usual manner, but without antilock assistance.
With the ABS malfunctioning, the BAS and ESP are also
switched off. Both malfunction indicator lamps and the
ABS malfunction message in the multifunction display
come on with the engine running.
If the charging voltage falls below 10 volts, the
malfunction indicator lamp comes on and the ABS is
switched off. When the voltage is above this value again,
the malfunction indicator lamp should go out and the
ABS is operational.
Have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
See page 216 for notes on the antilock brake system
(ABS).
BAS
ESP
ABS
J_C208_II.book Seite 229 Donnerstag, 31. Mai 2001 10:13 10

232 Malfunction and warning messages
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car care Index
Malfunction and warning messages in the
multifunction display
Malfunction and warning messages for the following
systems will be displayed immediately in the
multifunction display.
These messages can be cleared from the instrument
cluster by:
•using the J button on the instrument cluster, or
•pressing buttonj, k, è or ÿ on the
multifunction steering wheel.
They are then stored in the malfunction message
memory. See page 106.Notes:
Certain malfunction and warning messages are
accompanied by an audible signal.
Malfunction and warning messages in red are always
accompanied by an audible signal.
Temporary messages such as “SWITCH OFF LIGHTS”
will not be stored in the malfunction message memory.
Wa r n i n g !
All messages contain important information which
should be taken note of and, where malfunction
indicated, addressed as soon as possible at an
authorized Mercedes-Benz Center.Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz Limited
Warranty, or result in property damage or personal
injury.
J_C208_II.book Seite 232 Donnerstag, 31. Mai 2001 10:13 10

240 Malfunction and warning messages
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car care Index
LIGHTING SYSTEMWhen the message appears after starting the engine, or
if it comes on while driving, this indicates a failure in
the parking lamp, taillamp, stop lamp, or low beam
headlamp. See page 275 for instructions on replacing
bulbs.
If an exterior lamp fails, the message will appear only
when that lamp is switched on.
If a brake lamp fails, the message will appear when
applying the brake and stays on until the engine is
turned off.
Note:
If additional lighting is installed (e.g. auxiliary
headlamps etc.) be certain to connect into the fuse
before the failure indicator monitoring unit order to
avoid damaging the system.
Line 1 Line 2
LAMP DEFECTIVE CHECK LAMPS!
DISPLAY DEFECTIVE VISIT WORKSHOP!
J_C208_II.book Seite 240 Donnerstag, 31. Mai 2001 10:13 10

241 Malfunction and warning messages
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car care Index LIGHT SENSOR
With the electronic key removed and the driver’s door
open, a warning sounds and the message “SWITCH OFF
LIGHTS!” appears in the multifunction indicator if the
vehicle’s exterior lamps (except standing lamps) are not
switched off.STEER. WHEEL ADJUST.
For locking the adjustable telescoping steering column,
see page 79.
Line 1 Line 2
STEER. WHEEL ADJUST.
J_C208_II.book Seite 241 Donnerstag, 31. Mai 2001 10:13 10

271 Jump starting
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hintsCar care Index Proceed as follows:
1. Position the vehicle with the charged battery so that
the jumper cables will reach, but never let the
vehicles touch. Make sure the jumper cables do not
have loose or missing insulation.
2. On both vehicles:
•Turn off engine and all lights and accessories,
except hazard warning flashers or work lights.
•Apply parking brake and shift selector lever to
position “P”.
Important!
3. Clamp one end of the first jumper cable to the
positive (+) under hood terminal of the discharged
battery and the other end to the positive (+) terminal
of the charged battery. Make sure the cable clamps
do not touch any other metal parts.
4. Clamp one end of the second jumper cable to the
grounded negative (–) terminal of the charged
battery and the final connection to the negative (–)
terminal (2) of the discharged battery.Important!
5. Start engine of the vehicle with the charged battery
and run at high idle. Make sure the cables are not
on or near pulleys, fans, or other parts that move
when the engine is started. Allow the discharged
battery to charge for a few minutes. Start engine of
the disabled vehicle in the usual manner.
6. After the engine has started, remove jumper cables
by exactly reversing the above installation
sequence, starting with the last connection made
first. When removing each clamp, make sure that it
does not touch any other metal while the other end
is still attached.
Notes:
If engine does not run after several unsuccessful
starting attempts, have it checked at the nearest
authorized Mercedes-Benz Center.
Excessive unburned fuel may damage the catalytic
converter.
J_C208_II.book Seite 271 Donnerstag, 31. Mai 2001 10:13 10

318 Index
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car careIndex
GGarage door opener ....................................................... 166
Gasoline
Additives .................................................................... 309
Fuel requirements ....................................................308
Premium unleaded ................................................... 308
General notes on the central locking system .............. 26
Global locking
See Central locking system ....................................... 29
Glove box ......................................................................... 154HHazard warning flasher switch ................................... 121
Head restraints
Front ............................................................................. 51
Rear ............................................................................... 52
Removal ........................................................................ 51
Headlamp cleaning system ...........................................118
Headlights ........................................................................116
Heated seats ..................................................................... 56
High beams
See Combination switch ...........................................119
Hood ................................................................................. 251
IIdentification labels ...................................................... 299
Illuminated vanity mirrors ........................................... 153
Indicator lamps in the instrument cluster ...................86
Individual settings ......................................................... 108
Infant and child restraint systems ................................ 76
Installation ................................................................... 78
Information call
See Tele Aid ............................................................... 185
Instrument cluster ........................................................... 84
Activating .....................................................................87
Indicator lamps ............................................................ 86
Instrument lamps ............................................................. 87
Instruments and controls ............................................... 18
Interior
General notes ............................................................. 153
Interior lighting .............................................................. 151JJump starting ................................................................. 270
J_C208_II.book Seite 318 Donnerstag, 31. Mai 2001 10:13 10

319 Index
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car careIndex
KKeys, changing battery ................................................. 283
Keys, vehicle ..................................................................... 24LLamps, exterior .............................................................. 275
Fog lamps ....................................................................116
Headlamp, adjusting ................................................280
Headlamps ...................... 116, 240, 241, 276, 280, 294
Low and high beam .......................................... 119, 277
Parking lamp ..................................................... 116, 277
Replacing bulbs ......................................................... 275
Side marker lamp, front ........................................... 279
Standing lamp ................................................... 116, 277
Taillamp assemblies ......................................... 116, 278
Turn signal lamp ............................................... 119, 277
Layout of poly-V-belt drive ............................................ 300
LIGHT SENSOR - malfunction
and warning messages ............................................ 241
Lighter ............................................................................. 159
LIGHTING SYSTEM - malfunction
and warning messages ............................................ 240
Limp home mode (Automatic transmission) ............. 201
Loading instructions ..................................................... 162Locking and unlocking .................................................... 29
Low engine coolant level warning .............................. 238
MMaintenance ................................................................... 177
Malfunction and indicator lamps
in the instrument cluster ........................................ 226
Malfunction and warning messages .......................... 232
ABS-SYSTEM ............................................................. 235
BATTERY/ALTERNATOR ......................................... 234
BRAKE ASSIST ......................................................... 235
BRAKE FLUID ........................................................... 236
BRAKE LINING WEAR ............................................ 236
COOLANT (coolant level) ........................................ 238
COOLANT TEMP.
(coolant temperature) ......................................... 239
DISPLAY DEFECTIVE
(engine control unit) ........................................... 233
DISPLAY DEFECTIVE
(several systems) ................................................. 233
ELEC. STABIL. PROGR. ............................................ 243
ENGINE FAN ............................................................. 237
ENGINE OIL LEVEL ................................................. 242
LIGHT SENSOR .......................................................... 241
LIGHTING SYSTEM .................................................. 240
J_C208_II.book Seite 319 Donnerstag, 31. Mai 2001 10:13 10

324 Index
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car careIndex
WWa r n i n g l a mp s
See Indicator lamps in the instrument cluster ...... 86
Warning message memory ........................................... 106
Warranty coverage ......................................................... 298
WASHER FLUID (headlamp cleaning system) -
malfunction and warning messages ......................244
Washing the vehicle ......................................................294
What you should know at the gas station .................. 222
Wheels .............................................................................259
Light alloy wheels .....................................................295
Rims and tires ...........................................................302
Wheels, changing .....................................................262
Where to find it ................................................................ 13
Windows
See Power windows .................................................. 147
Windshield washer/headlamp cleaning system
Refilling ...................................................................... 256
Winter driving ................................................................ 210
Winter driving instructions .........................................209
Wiper blade
Replacing insert ........................................................ 287
Wiper operation
See Combination switch .......................................... 120
J_C208_II.book Seite 324 Donnerstag, 31. Mai 2001 10:13 10