
75 Restraint systems
Technical
data Instruments 
and controlsOperationDrivingInstrument 
cluster displayPractical hints Car care Index Infant and child restraint systems
We recommend all infants and children be properly re-
strained at all times while the vehicle is in motion. All 
lap-shoulder belts except the driver’s seat belt have 
special seat belt retractors for secure fastening of child 
restraints.
To activate, pull shoulder belt out completely and let it 
retract. During the seat belt retraction a ratcheting 
sound can be heard to indicate that the special seat belt 
retractor is activated. The belt is now locked.
To deactivate, release seat belt buckle and let seat belt 
retract completely. The seat belt can again be used in 
the usual manner.Important!
The use of infant or child restraints is required by law in 
all 50 states and all Canadian provinces.
Infants and small children should be seated in an 
appropriate infant or child restraint system properly 
secured by a lap-shoulder belt, and that complies with 
U.S. Federal Motor Vehicle Safety Standard 213 and 
Canadian Motor Vehicle Safety Standard 213. 
A statement by the child restraint manufacturer of 
compliance with this standard can be found on the 
instruction label on the restraint and in the instruction 
manual provided with the restraint.
When using any infant or child restraint system, be sure 
to carefully read and follow all manufacturer’s 
instructions for installation and use. 
Please read and observe warning labels affixed to inside 
of vehicle and to infant or child restraints.
Wa r n i n g !
Never release the seat belt buckle while vehicle is 
in motion, since the special seat belt retractor will 
be deactivated.
J_A208.book Seite 75 Donnerstag, 31. Mai 2001 9:35 09 

127 Audio system
Technical
data Instruments 
and controlsOperationDrivingInstrument 
cluster displayPractical hints Car care Index Audio and telephone, operation
These instructions are intended to help you become 
acquainted with your Mercedes-Benz vehicle radio. 
They contain useful tips and a detailed description of 
the user functions.
The right to correct errors and make technical amendments is 
reserved.
Operating safety1Optional equipment
Dolby and the double-D symbol 
Ù
 are trademarks of Dolby 
Laboratories Licensing Corporation. The Dolby noise reduction 
system is manufactured under licence from Dolby Laboratories 
Licensing Corporation.
Wa r n i n g !  
In order to avoid distraction which could lead to an 
accident, system settings should be entered with 
the vehicle at standstill and systems should be 
operated by the driver only when traffic conditions 
permit. Always pay full attention to traffic 
conditions first before operating system controls 
while driving.Bear in mind that at a speed of just 30 mph 
(approximately 50 km/h), your vehicle is covering 
a distance of approximately 50 feet (approximately 
14 m) every second.
Wa r n i n g !
Any alternations made to electronic components 
can cause malfunctions.The radio, cassette deck, CD changer
1 and 
telephone
1 are interconnected. Therefore, when 
one of the components is defective or has not been 
removed/replaced properly this may impair the 
function of other components.
These malfunctions might seriously impair the 
operating safety of your vehicle.We recommend that you have any service work or 
alternations on electronic components done in an 
authorized Mercedes-Benz Center.
J_A208.book Seite 127 Donnerstag, 31. Mai 2001 9:35 09 

174 Wind screen
Technical
data Instruments 
and controlsOperationDrivingInstrument 
cluster displayPractical hints Car care Index
Roller Blind (horizontal) To open blind: 
1. P ull out b lin d  o n tab (arr ow 1 ) towar ds  vehicles  rear. 
Insert guide rod of blind in right rear seat belt outlet 
(arrow 2).
2. Insert other end of rod in left rear seat belt outlet as 
shown with arrow (3).
Important!
Do not place anything on the roller blind.
To retract blind: 
•Hold blind at tab, disengage and guide retraction.
3
1
2
P65.00-2049-26
J_A208.book Seite 174 Donnerstag, 31. Mai 2001 9:35 09 

175 Wind screen
Technical
data Instruments 
and controlsOperationDrivingInstrument 
cluster displayPractical hints Car care Index Roller Blind (vertical) To open blind: 
1. Fold driver and front passenger seat backrests 
forward. 
2. Pull out on tab, located below rear bench, towards 
vehicle’s front, then pull up and engage blind at 
wind screen. 
To retract blind: 
1. Fold driver and front passenger seat backrests 
forward. 
2. Hold blind at tab, disengage and guide its retraction.
P65.00-2018-26
J_A208.book Seite 175 Donnerstag, 31. Mai 2001 9:35 09 

197 Automatic transmission
Technical
data Instruments 
and controlsOperationDrivingInstrument 
cluster displayPractical hints Car care Index Stopping
For brief stops, e.g. at traffic lights, leave the 
transmission in gear and hold vehicle with the service 
brake.
For longer stops with the engine idling, shift into “N” 
or “P” and hold the vehicle with the service brake.
When stopping the vehicle on an uphill gradient, do not 
hold it with the accelerator, use the brake. This avoids 
unnecessary transmission heat build up.
Maneuvering
To maneuver in tight areas, e.g. when pulling into a 
parking space, control the vehicle speed by gradually 
releasing the brakes. Accelerate gently and never 
abruptly step on the accelerator.
To rock a vehicle out of soft ground (mud or snow), 
alternately shift from forward to reverse, while applying 
slight partial throttle.Rocking a vehicle free in this manner may cause the 
ABS or traction system malfunction indicator lamp to 
come on. Turn off and restart the engine to clear the 
malfunction indication.
Wa r n i n g !
Getting out of your vehicle with the selector lever 
not fully engaged in position “P” is dangerous. 
Also, when parked on an incline, position “P” alone 
may not prevent your vehicle from moving, 
possibly hitting people or objects.Always set the parking brake in addition to shifting 
to position “P”, see page 204 for parking brake. When parked on an incline, also turn front wheel 
against curb.Wa r n i n g !
When leaving the vehicle, always remove the 
electronic key from the steering lock, and lock the 
vehicle. Do not leave children unattended in the 
vehicle, or with access to an unlocked vehicle. 
Children could move the gear selector lever from 
position “P”, which could result in an accident or 
serious personal injury.
J_A208.book Seite 197 Donnerstag, 31. Mai 2001 9:35 09 

202 Automatic transmission
Technical
data Instruments 
and controlsOperationDrivingInstrument 
cluster displayPractical hints Car care Index
Program mode selector switch
The transmission is provided with a selector switch (1) 
for Standard “S” and Winter/Wet (snow and ice) “W” 
program modes.
SStandard mode
Press switch on symbol “S”. Use this mode for all 
regular driving.
The vehicle starts out in 1st gear.Accelerator Operation: 
Fast on = d epr es sin g t he acce ler ator p ed al q uick ly  
(not into kickdown position) while driving 
continuously, rather than depressing the 
accelerator pedal in the usual manner, will cause 
the automatic transmission to shift down into a 
lower gear. This gear shifting process is 
dependent on the current vehicle speed.
Fast off = there will be no upshift when releasing 
the accelerator pedal quickly, e.g. using the 
engine’s braking power during performance 
driving.
WWinter/Wet (snow and ice) mode
Press switch on symbol “W”. The vehicle starts 
out in 2nd gear, except with selector lever in 1st 
gear, or with accelerator pedal in kick-down 
position.
The “W” mode helps to improve traction and 
driving stability of the vehicle.
The gear shifting process occurs at lower vehicle 
and engine speeds than in the “S” program mode.
1
J_A208.book Seite 202 Donnerstag, 31. Mai 2001 9:35 09 

209 Driving instructions
Technical
data Instruments 
and controlsOperationDrivingInstrument 
cluster displayPractical hints Car care IndexSpecified tire pressures must be maintained. This 
applies particularly if the tires are subjected to high 
loads (e.g. high speeds, heavy loads, high ambient 
temperatures).
Aquaplaning
Depending on the depth of the water layer on the road, 
aquaplaning may occur, even at low speeds and with 
new tires. Reduce vehicle speed, avoid track grooves in 
the road and apply brakes cautiously in the rain.
Wa r n i n g !
Do not allow your tires to wear down too far. As 
tread depth approaches 
1/16in (1.5 mm), the 
adhesion properties on a wet road are sharply 
reduced.
Depending upon the weather and / or road surface 
(conditions), the tire traction varies widely.
Wa r n i n g !
Do not drive with a flat tire. A flat tire affects the 
ability to steer or brake the vehicle. You may lose 
control of the vehicle. Continued driving with a flat 
tire or driving at high speed with a flat tire will 
cause excessive heat build-up and possibly a fire.
J_A208.book Seite 209 Donnerstag, 31. Mai 2001 9:35 09 

210 Driving instructions
Technical
data Instruments 
and controlsOperationDrivingInstrument 
cluster displayPractical hints Car care Index
Tire traction
The safe speed on a wet, snow covered or icy road is 
always lower than on a dry road.
You should pay particular attention to the condition of 
the road whenever the outside temperatures are close to 
the freezing point.
We recommend M+S rated radial-ply tires for the winter 
season for all four wheels to insure normal balanced 
handling characteristics. On packed snow, they can 
reduce your stopping distance as compared with 
summer tires. Stopping distance, however, is still 
considerably greater than when the road is not snow or 
ice covered.Tire speed rating
CLK 320:
Your vehicle is factory equipped with “H”-rated tires, 
which have a speed rating of 130 mph (210 km/h).
CLK 430:
Your vehicle is factory equipped with “W”-rated tires, 
which are permissible for speeds up to 168 mph 
(270 km/h).
An electronic speed limiter prevents your vehicle from 
exceeding a speed of 130 mph (210 km/h).
CLK 55 AMG:
Your vehicle is factory equipped with “Y”-rated tires, 
which have a speed rating of 188 mph (300 km/h).
An electronic speed limiter prevents your vehicle from 
exceeding a speed of 155 mph (250 km/h).
Despite the tire rating, local speed limits should be 
obeyed. Use prudent driving speeds appropriate to 
prevailing conditions.
Wa r n i n g !
If ice has formed on the road, tire traction will be 
substantially reduced. Under such weather 
conditions, drive, steer and brake with extreme 
caution.
Wa r n i n g !
Even when permitted by law, never operate a 
vehicle at speeds greater than the maximum speed 
rating of the tires.
J_A208.book Seite 210 Donnerstag, 31. Mai 2001 9:35 09