2002 MAZDA MODEL 626 lights

5-31
Driving Your Mazda
Warning/Indicator Lights and Beeps
Form No. 8Q50-EA-01G





Ignition Key Reminder
If the ignition switch is in the LOCK or
ACC position, a beep will sound when
any door is opened.





Lights-On Reminder
If lights are on and the key is removed
from the ignition switch, a beep will
sound when any door is opened.
Beeps
J94S.book Page 31 Saturday, June 23, 2001 1:04 PM

5-32
Driving Your Mazda
Form No. 8Q50-EA-01G
Switches and Controls





Headlights
To turn on the lights, turn the knob on the
end of the control lever.





Lights-On Reminder
If lights are on and the key is removed
from the ignition switch, a beep will
sound when any door is opened.





Headlight High-Low Beam
Push the lever forward for high beams.
Pull it back for low.





Flashing the Headlights
To flash the headlights, pull the lever fully
toward you. The headlight switch need
not be on, and the lever will return to the
normal position when released.
Lighting Control
Lever Position OFF
Headlights Off Off OnTaillights
Parking lights
License lights
Side-marker lights Off On On
NOTE
•
If the light switch is left on, the
lights will automatically switch off
30 seconds after turning the ignition
switch to the LOCK position or
removing the key.
The lights will automatically switch
back on when the ignition switch is
turned to the ACC or ON position.
• To prevent discharging the battery,
don ’t leave the lights on while the
engine is off.
Low beams High beams
J94S.book Page 32 Saturday, June 23, 2001 1:04 PM

5-33
Driving Your Mazda
Switches and Controls
Form No. 8Q50-EA-01G





Turn Signal
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Green indicators on the dashboard show
which signal is working.
Lane-change signals
Move the lever slightly toward the
direction of the change —until the
indicator flashes— and hold it there. It
will return to the off position when
released. In Canada, vehicles must be driven with
the headlights on during daytime
operation.
For that reason, the daytime running lights
automatically turn on when the ignition
switch is turned to the ON position.
Turn and Lane-Change
Signals
NOTE
If an indicator light stays on without
flashing or if it flashes abnormally, the
turn signal bulb may be burned out.
Right turn
Right lane change
OFF
Left lane
change Left turn
Daytime Running Lights
NOTE
The running lights go off when the
parking brake is applied.
J94S.book Page 33 Saturday, June 23, 2001 1:04 PM

5-36
Driving Your Mazda
Switches and Controls
Form No. 8Q50-EA-01G
To sound the horn, press around the
mark of the steering wheel.The hazard warning lights should always
be used when you stop on or near a
roadway.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
Depress the hazard warning switch and all
four turn signals will flash at once.
HornHazard Warning Flasher
NOTE
•
The turn signals don ’t work when
the hazard warning lights are on.
• Check local regulations about the
use of hazard warning lights while
the vehicle is being towed. They
may forbid it.
J94S.book Page 36 Saturday, June 23, 2001 1:04 PM

6-1
Form No. 8Q50-EA-01G
6Interior Comfort
Use of various features for drive comfort, including air-conditioning
and audio system.
Climate Control System .............................................................. 6- 2
Operating Tips ......................................................................... 6- 2
Vent Operation ......................................................................... 6- 3
Manual Type ............................................................................ 6- 6
Audio System ............................................................................... 6-11
Antenna ................................................................................... 6-11
Operating Tips for Audio System ............................................ 6-11
Audio Set ................................................................................. 6-19
Safety Certification .................................................................. 6-36
Interior Equipment ..................................................................... 6-37
Interior Lights .......................................................................... 6-37
Accessories .............................................................................. 6-38
Storage Compartments ............................................................ 6-41
Sunvisors ................................................................................. 6-44
J94S.book Page 1 Saturday, June 23, 2001 1:04 PM

6-37
Interior Comfort
Form No. 8Q50-EA-01G
Interior Equipment





Overhead light






Illuminated Entry System
When the switch is in the DOOR position,
the interior light comes on for:
• about 30 seconds after the driver ’s door
is unlocked by the transmitter or the
door lock switch and the ignition key is
removed.
• about 15 seconds after all doors are
closed.
• about 15 seconds after the key is
removed from the ignition.
The light also goes out when:
• the ignition switch is turned to the ON
position and all doors are closed.
• the door is lockedby the transmitter or
the door lock switch .





Map Lights
The map lights are switched on or off by
pressing the switches.
Interior Lights
OFF Light off
DOOR Light on when any
door is open
ON Light on
OFFDOOR
ON
NOTE
If any door is left opened, the light
goes out after about 5 minutes.
Map light
Map light
With sunroof
Map light
Without sunroof
J94S.book Page 37 Saturday, June 23, 2001 1:04 PM

6-38
Interior Comfort
Interior Equipment
Form No. 8Q50-EA-01G





Courtesy Light
Lights on when any door is open.





Accessory Socket
The ignition switch must be in the ACC or
ON position.
Only use genuine Mazda accessories or
the equivalent requiring no greater than
12V —10A.
Courtesy light
Accessories
To prevent accessory socket damage or
electrical failure, pay attention to the
following;
• Don ’t use accessories that require
more than 12V —10A.
• Don ’t use accessories that are not
genuine Mazda accessories or the
equivalent.
• Close the cover when the accessory
socket is not in use.
• Correctly insert the plug into the
accessory socket.
NOTE
To prevent discharging the battery,
don ’t use the socket for long periods
with the engine off or idling.
CAUTION
J94S.book Page 38 Saturday, June 23, 2001 1:04 PM

7-2
In Case of an Emergency
Form No. 8Q50-EA-01G
Parking in an Emergency
The hazard warning lights should always
be used when you stop on or near a
roadway.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
Depress the hazard warning switch and all
four turn signals will flash at once.
Parking in an Emergency
NOTE
•The turn signals don ’t work when
the hazard warning lights are on.
• Check local regulations about the
use of hazard warning lights while
the vehicle is being towed. They
may forbid it.
Hazard warning flasher switch
J94S.book Page 2 Saturday, June 23, 2001 1:04 PM