REAR DIFFERENTIAL
M–49
M
End Of SieOIL SEAL (SIDE GEAR) REPLACEMENTA6E6319271002051. Remove the drain plug and the drain differential oil into a container.
2. Install a new washer and the drain plug, and tighten.
3. Remove the rear drive shaft. (See M–43 REAR DRIVE SHAFT REMOVAL/INSTALLATION.)
4. Remove the clip from the drive shaft.
Caution
•Wrap the end of a screwdriver with cloth to prevent scratches to the inside of the differential
casing.
5. Remove the oil seal from the differential casing
using a screwdriver.
6. Apply differential oil to the new oil seal lip.
7. Install the new oil seal to the differential carrier
using the SSTs.
8. After installing the new clip onto the drive shaft,
insert the drive shaft into the differential. (See M–
43 REAR DRIVE SHAFT REMOVAL/
INSTALLATION.)
9. Verify that the drive shaft cannot be pulled out.
10. Add the specified differential oil.
11. fter adding the oil, perform an oil level inspection.
(See M–48 DIFFERENTIAL OIL INSPECTION.)
12. Install a new washer and the oil filler plug, and
tighten.
Tightening torque
39.2—53.9 N·m {4.0—5.4 kgf·m, 29.0—39.7 ft·lbf}
End Of Sie
OIL SEAL (COMPANION FLANGE) REPLACEMENTA6E6319271002061. Drain the differential oil into a container.
2. Remove the propeller shaft. (See L–5 PROPELLER SHAFT REMOVAL/INSTALLATION.)
3. Remove the locknut using the SST.
4. Support the differential using a jack.
A6A63192003
49 G030 79649 G030 797
A6A63192004
49 S120 710
A6A63192005
