ELECTRICAL COMPONENTS
291
CHECKING THE HEADLIGHT AIM
64G020d
1Beam angle gauge
(vertical movement for low beam)
2Beam angle gauge
(horizontal movement for low beam)
3Beam angle gauge
(vertical movement for high beam)
4Beam angle gauge
(horizontal movement for high beam)
Before checking the headlight aim:
1. Be sure that the body around the headlight is not deformed.
2. Park the vehicle on a level spot.
3. The driver gets into the driver's seat and puts the vehicle in
a state readying for a driving (with a full tank).
4. Bounce the vehicle several times.
Adjusting the headlight aiming (low beam)
64g059a
1Adjusting bolt A
2Adjusting bolt B
ELECTRICAL COMPONENTS
294
Adjusting the headlight aiming (high beam)
64g080a
1Adjusting bolt A
2Adjusting bolt B
64G081
1Bubble 2Acceptable range
Vertical movement gauge: The bubble of the gauge should
not deviate from the center of the gauge by more than 2 marks
to either side of the gauge.
If the bubble is out of the acceptable range of the beam angle
gauge, adjust it using bolt A.
