8F±34BODY STRUCTURE
Disconnect the instrument harness connectors (six
connectors on the driver's side, three connectors
on the passenger side and two connectors on the
center side).
Disconnect radio antenna cable plug and the
ground cable fixing bolts from dash side panel.
Remove the two fixing bolts of passenger air bag
assembly and disconnect the connector.
Remove the two fixing screws from fuse box.
After pry the three hole cover from the surface of
instrument panel, remove the three nuts.
Remove the six bolts and one screw.
740R200022
15. Remove the passenger air bag (1).
Remove the four fixing nuts.
CAUTION: F o r p recautions on installation or
removal of SRS ± air bag system, refer to
Supplemental Restraint System in Restraint section.
827RY00004
16. Remove the vent duct assembly.
Remove the five fixing screws.17. Remove the passenger lower bracket.
Remove the three screws.
18. Remove the glove box side reinforcement.
19. Remove the instrument upper reinforcement.
Remove the nine screws.
20. Remove the instrument panel center reinforcement.
Remove the six screws.
21. Remove the instrument panel harness assembly (1).
Remove the clips.
740R200023
22. Remove the instrument panel stays.
Remove the two fixing nuts and two fixing bolts for
each bracket.
23. Remove the cross beam.
Remove the five fixing nuts, two fixing bolts (upper)
and six fixing bolts (lower).
840RW005
Installation
To install, follow the removal steps in the reverse order.
