µ
´
´ Connect the second jumper cable
to the negative ( ) terminal on
the booster battery. Connect the
other end to the grounding strap
as shown. Do not connect this
jumper cable to any other part of
the engine.
If the booster battery is in another
vehicle, have an assistant start
that vehicle and run it at a fast idle.
Connect one jumper cable to the
positive ( ) terminal on your
Honda’s battery. Connect the
other end to the positive ( )
terminal on the booster battery.
5.
3.
4.
CONT INUED
Jump Starting
T aking Care of t he Unexpect ed321
44--ccyylliinnddeerrmmooddeellss66--ccyylliinnddeerrmmooddeellss44--ccyylliinnddeerrmmooddeellss
Once your car is running, discon-
nectthenegativecablefromyour
car, then from the booster battery.
Disconnect the positive cable f rom
your car, then the booster battery.
Keep the ends of the jumper
cables away from each other and
any metal on the car until all are
disconnected. Otherwise, you may
cause an electrical short.
Start your car. If the starter motor
still operates slowly, check the
jumper cable connections to make
sure they have good metal-to-
metal contact.
The numbers in the illustrations
show you the order to connect the
jumper cables.
7.
6.
Jump Starting
T aking Care of t he Unexpect ed322
66--ccyylliinnddeerrmmooddeellss44--ccyylliinnddeerrmmooddeellssBBOOOOSSTTEERRBBAATTTTEERRYYBBOOOOSSTTEERRBBAATTTTEERRYY66--ccyylliinnddeerrmmooddeellss
