2-84Fuel Each press of the FUEL button will change the
display between the fuel remaining range, average
fuel economy, instantaneous fuel economy and a
blank display.
The average fuel economy can be reset using the
RESET button.
Trip Each press of the TRIP button will change the
display between personal trip computer, business trip
computer, timer, vehicle history, annual mileage and a
blank display.
Personal Trip Computer and Business
Trip Computer
Each press of the arrow button will change the
display between turn on/off, trip odometer, fuel used,
average fuel economy and average speed.
The ON/OFF button will turn the trip computer on
and off. The information on the trip computer only
gets updated when it is turned on. The personal and
business computers are independent, i.e. turning one
of them on does not turn the other off. All information associated with the trip computer
will be reset when the RESET button is pressed.
If the RESET button is pressed and held for more
than two seconds, all of the trip computer settings
will reset starting from the last ignition cycle
(turning the ignition from OFF to RUN). This
feature is for someone who has forgotten to reset the
trip computer when pulling out of the driveway and
does not realize it until after driving for awhile.
Timer
Each press of the ON/OFF button will turn the timer
on or off.
The RESET button will reset the timer to 00:00:00.
If turned on, the timer will accumulate whenever
the SIC is powered (the engine does not have to
be running).
The timer will rollover after 99:59:59.
2-85Vehicle History Last 15 Days
The first press of the arrow button will display the
maximum speed and accumulated mileage for the
current day.
Every press of the arrow button after will display the
maximum speed and accumulated mileage for the
previous day.
This feature requires the date and time to be set
correctly. Refer to the setting of day/date/time under
the MENU button explained later in this section.
Annual Mileage
The annual mileage displayed is the mileage
accumulated since the annual mileage was reset.
Pressing the RESET button will reset the annual
mileage to 0.
Pressing the arrow button will display the ratio of
personal trip computer mileage to annual mileage as
a percent.
Pressing the arrow button again will display the ratio
of business trip computer mileage to annual mileage
as a percent. Menu Press the MENU button to choose a feature you would
like to personalize (the features are listed below). Each
press of the button will display a new item that can be
personalized. Use the arrow button to choose the setting
you would like to use within the chosen feature. For
example: Say you would like to personalize the
automatic door locks so that the automatic locking
feature is disabled. You would do the following:
1. First press the MENU button until you reach the
Automatic Door Lock screen.
2. Next, press the arrow button until you find the
Disabled setting.
3. The setting is now actually set without having to
do anything else. You can do one of three things at
this point:
You can leave the personalization mode by
pressing FUEL or TRIP. The SIC will then
display the day/date.
8-6Roadside Assistance
GMC's Roadside Assistance provides stranded owners
with over
- the
- phone roadside repairs, location of the
nearest GMC dealer or the following special services:
Flat Tire Change: Installation of spare tire will be
covered at no charge (customer is responsible for repair
or replacement of tire). Fuel Delivery: Delivery of enough fuel for the customer
to get to the nearest service station (up to $5.00) will
be covered.
Jump Start: No
- start situations which require a battery
jump start will be covered at no charge.
Lock Out: Replacement keys or locksmith service will
be covered at no charge if you are unable to gain entry
into your vehicle. Delivery of the replacement key will
be covered at no charge within 10 miles (16 km).
Emergency Towing Service: Towing to the nearest
GMC dealer for warranty related disablements will
be covered.
Trip Routing : Custom
- made, computerized highlighted
maps using the most direct or scenic route are provided
free of charge. Maps include points of interest and a list
of GMC dealers along the route. Also included is a list
of hotels along the route that are discounted through
affiliation with ªQuest International.º Trip Routing
is available through Roadside Assistance by calling
1
- 800
- GMC
- 8782 (462-8782). Please be prepared
to provide your Vehicle Identification Number (VIN).
Allow five working days for fulfillment.
