1-4 Power Lumbar Control
Your vehicle's power
lumber controls are
located near the power
seat controls. You can
increase or decrease lumbar
support in an area of the
lower seatback with the
lumber controls.
To increase support, press and hold the front of the
control. To decrease support, press and hold the rear
of the control. Let go of the control when the lower
seatback reaches the desired level of support.
You can also reshape the side wing area of the lower
seatback for more lateral support.
To increase support, press and hold the top of the
control. To decrease support, press and hold the
bottom of the control. Let go of the control when the
lower seatback reaches the desired level of support.
Memory Seat and Memory Mirrors
The memory function controls are located on the driver's
door trim panel.
For this function to work, it must be enabled/configured
in the secondary information center. See ªSecondary
Information Centerº in the Index for more information.
These controls are used to program and recall the memory
settings for the driver's seat and both the driver's and
the passenger's outside mirrors. The seat and mirror
positions can be personalized for both driver 1 and driver 2.
