70n
Digital clock
Only make entries when the
vehicle is standing still Ð to avoid
endangering yourself or other road
users.<
Displaying time or datePress the left of the button.
Display shows:
You can have the time of day displayed
in 12 or 24 hours.
To change the display:
Press the left of the button.
If the 12-hour time display is in use, AM
or PM appears after the time.
Changing the time displayPress the left of the button.
Press the right of the button:
The dots flash in the display.
To alter the setting:
Press on left or right, or hold the button
down.
To store the entry:
Press the right of the button.
Changing the datePress the left of the button.
Press.
Press the right of the button:
The dots and the DATE display will
flash.
To alter the setting:
Press on left or right, or hold the button
down.
To store the entry:
Press the right of the button.
The clock takes leap years into account
and therefore does not have to be reset
manually.
72n
Digital clockSetting activation times for
parked-car ventilation systemYou can enter two different activation
times.
After 30 minutes, the ventilation will
switch off automatically.
Please observe the instructions
for operating the parked-car venti-
lation system on page 92.<
Press the left of the button.
Press at left or right.
Display shows:
Press the right of the button:
Display flashes, e. g. TIMER 1.
To enter the time:
Press on left or right, or hold down.
To confirm the entry:
Press the right of the button.
The activated time is marked with an
asterisk.
The switch-on times remain memorized
until new entries are made.
You can change switch-on times that
have already been memorized by
setting a new time using the procedure
described above.
When the switch-on time is active, the
LED comes on in the MID. During actual
operation of the ventilation, the LED
flashes. The LED goes out when the
system is switched off.
To activate/deactivate the time:
Press twice.Turning the parked-car ventilation
system on and off directly
The parked-car ventilation system
is available exclusively in ignition
key position 1.<
Press the left of the button.
Press
or
press.
