Downloaded from www.Manualslib.com manuals search engine 32
N62 Engine
H Hy
yd
dr
ra
au
ul
li
ic
c
A
Ac
ct
tu
ua
at
ti
io
on
n:
:
When oil pressure is applied to chamber A, the blades are forced away from the VANOS
housing (counterclockwise). The blades are keyed into the hub which results in the hub
position being rotated in relation to the housing (with sprocket). The hub is secured to the
camshaft which changes the camshaft to sprocket relationship (timing).
The example below shows the a ad
dj
ju
us
st
tm
me
en
nt
t
procedure together with the pressure progres-
sion based on the VANOS unit for the exhaust camshafts.
During this adjustment chamber B is open (through the solenoid) to allow the oil to drain
back through the cylinder head (internal reservoir).
Hydraulic Actuation - Chamber A
1. Front View of Vanos Unit 5. Engine Oil Pump
2. Side View of Vanos Unit 6. Supplied Oil from Pump (Switched Through Solenoid)
3. Camshaft Oil Port (Chamber B) 7. Supplied Oil Pressure (From Engine Oil Pump)
4. Solenoid Valve43-02-45
