15-07-2002
PRACTICAL INFORMATION
144
CHANGING A BULB Front lights
In the engine compartment, remove the style cover secured by one or two butterfly screws, a plastic retainer clip andtwo screws. Note:
handle the bulbs with a dry cloth.
1 - Dipped beam headlamps: H7-55W or Xenon bulb.
WARNING: RISK OF ELECTROCUTION Xenon bulbs must be replaced by a PEUGEOT
dealer.
2 - Main beam headlamps: H1-55W.
Turn the protective cover of the faulty bulb a quarterof a turn and remove it.
Disconnect the connector.
Press the end of the securing clip to free it. Changethe bulb.
When fitting the new bulb, ensure that the directionnotches are positioned correctly and the securing
clip is fixed properly.
Reconnect the connector.
Refit the protective cover.
The headlamps are fitted with polycarbonate glass with aprotective coating. Do not clean them with a dry or abra-
sive cloth, nor with a detergent or solvent product.
3 - Side lights: W 5 W.
Pull the socket rearwards, remove the bulb and change it.
4 - Direction indicators: PY 21 W (amber).
Turn the bulb holder a quarter turn and remove it.
Change the bulb.
Refit the style cover.
Front foglamps: H1 - 55 W.
Note: In certain climatic conditions (low temperature,
humidity), condensation on the inside surface of the
headlamp glass is normal ; it disappears a few minutes
after the lights are switched on.
15-07-2002
146PRACTICAL INFORMATION
Boot lid lights 1 - Reversing lights: P 21 W.
2 - Fog lamps: P 21 W.
Remove the three plastic retain- er clips securing the cover trim(those nearest to the lamp).
Move aside the trim.
Turn the bulb holder a quarterturn.
Change the faulty bulb. Number plate lights:
W 5 W.
Remove the transparent coverusing a screwdriver blade.
Change the faulty bulb.
