2002.5 Peugeot 406 navigation

29-07-2002
Display CThis enables the following information to be displayed:
– the time,
– the date,
– the outside temperature (the °C symbol flashes when there is a risk of ice),
– the radio displays,
– the status of the doors. The display shows you whether a doo r, the boot or the
bonnet is open,
– the warning messages are displayed temporarily (e.g. "top up fue l tank'') and
can be cleared using the remote control,
– the trip computer (see following page),
– the satellite navigation system (see corresponding section).
Setting the parameters
The remote control allows you to access the settings. Accessing the different
menus is described in the section on the Satellite Navigation System.
YOUR 406 IN DETAIL
136

29-07-2002
THE SATELLITE NAVIGATION
SYSTEM
Introduction
The satellite navigation system guides
you to the destination of your choice
by means of vocal and visual instruc
tions.
The heart of the system lies in the use
of a map database and GPS (Global
Positioning System). This enables
your position to be located by means
of several satellites.
The satellite navigation system con
sists of the following components:
the remote control,
the display,
the control unit,
the last voice message recall control,
the CD ROM.
Some functions or services
described in this guide may vary depending on the CD ROM version or the country.The remote control
There is a storage compartment for the remote control in front of the ashtray.
Pointing the remote control at the screen enables the informat ion contained in
the various menus to be selected.
Direction arrows:
These enable you to move around the screen and
thus select a function.
On the welcome screen only, the Up and Down
buttons enable the brightness of the screen to be
adjusted.
menu : this button allows access to the main menu. It can
be used at any time.
esc : escape button
"Short press": cancels the current operation and
returns to the previous screen.
"Press for more than 2 seconds": returns to the
welcome screen.
This button can be used in any menu. It is inactive
during guidance.
mod : mode button
"Short press": changes between date, navigation
and radio.
val : Confirmation button
Confirms the function selected.
YOUR 406 IN DETAIL 95

29-07-2002
The control unit
This is located in the boot on the right hand side. In the
estate, open the panel to access it.
1. CD ROM eject button.
2. CD ROM compartment.
3. The ON indicator light indicates that the control unit is
supplied with power.
4. The CD indicator light indicates that there is a CD
ROM in the control unit.The last voice message recall control
Pressing the button briefly
on the end of the lights
stalk repeats the last voice
message.
The CD ROM This contains all the mapping
data.
It must be inserted with the
printed face upwards.
Use only CD ROMs approved by PEUGEOT.
The satellite navigation system is active once the globe
appears in bold.
YOUR 406 IN DETAIL 97
The use of copied CDs can cause malfunctions.

29-07-2002
Main menu
Switch on the ignition.
Press the "Menu"button to access the main menu.
Select a function using the direction arrows, then confirm ( "VAL" button). The
"Navigation/guidance" menu offers various options
for selecting guidance:
By entering the address of a new destination.
By selecting a service (Hotel, station, airport...) available in a town.
By selecting an address stored in one of the two directo ries.
By resuming previously interrupted guidance or by stop ping current guidance. Two messages may be displayed
depending on the previous actions: "Resume guid
ance" or "Stop guidance" .
Radio functions are suspended when the system is in guidance mode.
YOUR 406 IN DETAIL
98
Navigation / Guidance
Following selection of the "Navigation/guidance"menu,
a screen warns you about the use of the navigation sys
tem. Follow the regulations in force and do not use the
remote control while driving.
Press the "VAL"button to access the next screen.

29-07-2002
YOUR 406 IN DETAIL103
Display configuration
From the general menu, the "Configure display"menu
gives access to the following parameters:
Adjustment of the brightness and the video display.
Adjustment of the date and time.
Selection of the language of the display and voice infor mation (English, German, Spanish, French, Italian).
Adjustment of the mode and units. This allows selection of the display in km/h or mph, in degrees Celsius or
Fahrenheit and selection of the time format (12 or 24
hour mode). Navigation options
From the main menu, the
"Navigation options"menu
gives access to the following parameters:
Management of the directories. It enables an address stored under a name to be renamed or deleted. To do
this, select the directory and the name to be changed.
Voice synthesis volume adjustment.
Deletion of all data stored in the two directories.

29072002
CHANGING A FUSE
The fuse boxes are under the fascia
and in the engine compartment.
Fascia fuse box
Turn the three screws a quarter turn
with a coin.
Pull at Aand tilt the cover to access
the fuses. Removing and changing a fuse
Before changing a fuse you must find out the cause of the fa
ult and have it put
right. The fuse numbers are indicated on the fuse box.
Use the special pliers Aattached to the box.
Always change a faulty fuse for one of the same rating.
Correct Incorrect Pliers A
Remove the fascia panel lower trim to access the builtin systems in terface.
Fuse no
. Rating Functions
A 20 A Locking/Unlocking, Deadlocking.
B 10 A Rear fog lamps.
.
C 40 A Demisting the mirrors.
D 15 A Rear screen wiper.
E 30 A Electric windows.
F15 A Supply to instrument panel
Display Audio equipment
Satellite navigation system
Air conditioning.
MAINTENANCE OF YOUR 406 41

29072002
CHANGING A FUSE
The fuse boxes are under the fascia
and in the engine compartment.
Fascia fuse box
Turn the three screws a quarter turn
with a coin.
Pull at Aand tilt the cover to access
the fuses. Removing and changing a fuse
Before changing a fuse you must find out the cause of the fa
ult and have it put
right. The fuse numbers are indicated on the fuse box.
Use the special pliers Aattached to the box.
Always change a faulty fuse for one of the same rating.
Correct Incorrect Pliers A
Remove the fascia panel lower trim to access the builtin systems in terface.
Fuse no
. Rating Functions
A 20 A Locking/Unlocking, Deadlocking.
B 10 A Rear fog lamps.
.
C 40 A Demisting the mirrors.
D 15 A Rear screen wiper.
E 30 A Electric windows.
F15 A Supply to instrument panel
Display Audio equipment
Satellite navigation system
Air conditioning.
MAINTENANCE OF YOUR 406 41

Fuse N° RatingFunctions
1 shuntCentral air bag.
25 A Ventilation controls.
3 10 A Instrument panel.
45 A Ignition +ve signal for Builtin Systems Interface.
5 Not used.
6 10 ASteering wheel stalk.
7 15 AAlarm siren.
8 10 ASatellite navigation system.
95 A Battery +ve signal for Builtin Systems Interface.
10 15 A Audio equipment.
11 10 AThird brake light.
12 10 A Righthand brake light.
13 20 ADriver's electric window.
14 30 ARear window lift.
15 Battery +ve towing socket.
16 20 AMemorisation of seats.
17 20 APassenger's electric seat.
18 10 A Lighter lighting Display Lighting for switches and ash tray , automatic gearbox selector lever.
Fascia fuse box
MAINTENANCE OF YOUR 406
42
29072002