2002.5 Peugeot 406 boot

THE KEYS
The keys allow you to switch on
the ignition and to independently
operate the locks on the front
doors, the glove box and the pas
senger air bag disarming switch.
Central locking
From the driver's door, the keys
allow you to lock, deadlock and
unlock the doors and the boot. If
one of the front doors is open, the
central locking does not work.
The remote control performs the
same functions at a distance.The remote control
Locking
Pressing button
Alocks the
vehicle.
This is confirmed by the fixed
lighting of the direction indicators
for approximately two seconds.
Unlocking
Pressing button Bunlocks the
vehicle.
This is confirmed by the rapid fla
shing of the direction indicators. STARTING
STOP position:
The ignition is off.
1st notch, Accessories position:
The ignition is off but the acces
sories can be used.
2nd notch, Running position:
The ignition is on.
Starting position:
Operates the starter.
YOUR 406 AT A GLANCE
4
Key without
remote control Key with
remote control
29-07-2002
105

29-07-2002
MAINTENANCE OF YOUR 40623

All driving conditions. o Arduous conditions
A AND C SERVICES AND THE INTERMEDIATE VISIT
Oil filter Fuel filter (Petrol only) Fuel filter element (Diesel only) Air filter element Spark plugs (Petrol only)HPI
Operation of lights and indicators Condition of glass, headlamp & light lenses and mirrors Horn Windscreen washer jets Condition of wiper blades Condition and tension of the ancillary drive belts Handbrake Condition of hydraulic circuits (hoses and covers) Condition of rubber boots and gaiters Brake pads o Play in hubs, link rods, ball joints, flexible mountings Shock absorbers Rear drum brake lining wear Condition and pressure of tyres (including spare wheel) Emission control check (Petrol only) Smoke opacity (Diesel only) Pollen filter (according to specification)o Visual check of the whole vehicle
DRAIN and REFILL
REPLACE
LEVELS
CHECK

ROAD TEST
Courtesy vehicle
SERVICE
Level
Operation Description of Operation First Service
A C Intermediate
Engine oil Bleed fuel filter (Diesel only)
Engine oil (check + topup) Gearbox level (check + topup) Battery level (check + topup) if cap is removable Front/rear screen wash level (check + topup) Coolant level (check + topup) Brake fluid level (check + topup) Power steering fluid level (check + topup, according to specifica tion)

29-07-2002
Door open warning
light
When the engine is running, the warning light indicates
that a door has not been
closed properly or that the
boot is open.
Electronic immobiliser
warning light
This indicates a malfunction of the electronic immobiliser.
Contact a PEUGEOT dealer.
Low fuel level
warning light.
When this warning light
comes on, you have
enough fuel to drive at least 30 miles
(50 km). The tank capacity is approx
imately 70 litres (15.4 gallons). Coolant temperature indicator
When the needle is in zone
A,the
temperature is correct.
When the needle is in zone B, the
temperature is too high. The central
(STOP) warning light flashes.
You must stop immediately.
Contact a PEUGEOT dealer.
Seat belt not fastened
warning light
With the engine running, the
indicator light comes on
when the driver's seat belt is
not fastened.
YOUR 406 IN DETAIL
131

29-07-2002
Door open warning
light
When the engine is running, the warning light indicates
that a door has not been
closed properly or that the
boot is open.
Electronic immobiliser
warning light
This indicates a malfunction of the electronic immobiliser.
Contact a PEUGEOT dealer.
Low fuel level
warning light.
When this warning light
comes on, you have
enough fuel to drive at least 30 miles
(50 km). The tank capacity is approx
imately 70 litres (15.4 gallons). Coolant temperature indicator
When the needle is in zone
A,the
temperature is correct.
When the needle is in zone B, the
temperature is too high. The central
(STOP) warning light flashes.
You must stop immediately.
Contact a PEUGEOT dealer.
Seat belt not fastened
warning light
With the engine running, the
indicator light comes on
when the driver's seat belt is
not fastened.
YOUR 406 IN DETAIL
131

29-07-2002
Display BThis enables the following information to be displayed:
– the time,
– the date,
– the outside temperature (the °C symbol flashes when there is a risk of ice),
– the radio displays,
– the status of the doors. The display shows you whether a doo r, the boot or the
bonnet is open and if the fuel filler cap is missing.
– the warning messages (e.g. ''battery low'') or information messa ges (e.g. "top
up fuel tank''), displayed temporarily, can be cleared by pressin g button 1or 2
– the trip computer.
Setting the parameters
Press button 1for two seconds to access the settings. The information flashes
to show it is ready to be modified.
Then, individual presses on button 1 allow you to scroll through the various data
in the following sequence:
– language in which the information is displayed,
– unit of distance (kms or miles),
– unit of temperature (Celsius or Fahrenheit),
– time format (12 then 24 hour mode)
– hour,
– minutes,
– year,
– month,
– day,
Pressing button 2allows you to change the information selected. Maintain the
pressure for rapid scrolling.
After ten seconds without action, the display returns to the ma in screen and the
modified data are recorded.
YOUR 406 IN DETAIL 135

29-07-2002
Display CThis enables the following information to be displayed:
– the time,
– the date,
– the outside temperature (the °C symbol flashes when there is a risk of ice),
– the radio displays,
– the status of the doors. The display shows you whether a doo r, the boot or the
bonnet is open,
– the warning messages are displayed temporarily (e.g. "top up fue l tank'') and
can be cleared using the remote control,
– the trip computer (see following page),
– the satellite navigation system (see corresponding section).
Setting the parameters
The remote control allows you to access the settings. Accessing the different
menus is described in the section on the Satellite Navigation System.
YOUR 406 IN DETAIL
136

29-07-2002
406 Saloon AUDIO SYSTEM (RM2)
Presentation
Your 406 saloon is fitted with a JBL Audio HiFi system, designed specifically for the passenger compartment.
At the heart of the system, a 240 watt multifunction amplifier (1) (located in the boot) independently controls 10 high
acoustic definition speakers.
These speakers provide optimal reproduction and distri bution of the sound in the vehicle, both in the front and th e
rear.
The speakers are situated:
– in the fascia: two Micro Tweeters (3) set into two Mediums (4) for reproduction of the sound in the front.
– in the front doors: two Woofers (2) for reproduction of bass frequencies in the front.
– on the rear parcel shelf: two Tweeters (5) for reproduction of treble (high frequencies) in the rear are set into two ellipti
cal speakers (6), which are adjusted to reproduce a very wide range of bass and u ltrabass frequencies throughout the
whole of the passenger compartment. You will appreciate the clarity and depth and notice that th e sound fills the
whole of the vehicle perfectly.
Adjusting in CD mode
The basic functions remain those of the audio set.
There is no need for any further adjustment. However, in orde r to take
full advantage of your JBL audio system, you are advised to set th e
AUDIO functions (BASS, TREB, FAD, BAL) to position "0"(zero) and
the Loudness (LOUD)to the "ON"position.
YOUR 406 IN DETAIL
82

29-07-2002
YOUR 406 IN DETAIL83
406 Estate AUDIO SYSTEM (RM2)
Presentation
Your 406 estate is fitted with a JBL Audio HiFi system, designe d specifically for the passenger compartment..
At the heart of the system, a 180 watt multifunction amplifier (1) (located in the boot) independently controls 10 high
acoustic definition speakers.
These speakers provide optimal reproduction and distri bution of the sound in the vehicle, both in the front and th e
rear.
The speakers are situated:
– in the fascia: two Micro Tweeters (3) set into two Mediums (4) for reproduction of the sound in the front.
– in the front doors: two Woofers (2) for reproduction of bass frequencies in the front.
– on the boot pillar: two Micro Tweeters (5) for reproduction of treble (high frequencies), set into two Mediums (6)giving
uniform sound reproduction throughout the whole of the vehi cle.
Adjusting in CD mode
The basic functions remain those of the audio set.
There is no need for any further adjustment. However, in ord er to take
full advantage of your JBL audio system, you are advised to set th e
AUDIO functions (BASS, TREB, FAD, BAL) to position "0"(zero) and
the Loudness (LOUD)to the "ON"position.