2002.5 Peugeot 406 wheel
[x] Cancel search: wheelPage 128 of 174
29-07-2002
For the front and side air bags to be fully effective, observe the following safety rules:
• Wear a correctly adjusted seat belt.
• Sit in a normal upright position (passengers must not place the ir feet on the fascia).
• Do not leave any accessories, objects or pets between the occupa nts and the air bags. It could hamper the operation
of the air bags or injure the occupants.
• All work on the air bag system is strictly forbidden unless it is ca rried out by an approved PEUGEOT dealer.
• After an accident or if the vehicle has been stolen or broken into, have the air bag systems checked.
• The air bag systems have been designed to be fully operation al for 10 years from the date of registration of the vehicle.
Have them replaced by a PEUGEOT dealer after this period.
Front air bags
• Do not drive holding the steering wheel by its spokes or resti ng your hands on the centre part of the wheel.
• Smoke as little as possible; deployment of the air bags can cau se burns or the risk of injury from a cigarette or pipe.
• Never remove or pierce the steering wheel or hit it violently.
Side air bags
• Do not fix or glue anything to the backs of the front seat s. This could cause injury to the chest or arms when the side
air bag inflates.
• Do not sit with the upper part of the body any nearer to the door than necessary.
• Only put approved covers on the seats. Contact your PEUGEOT deale r.
DRIVING YOUR 406 153
Page 130 of 174
29-07-2002
For the front and side air bags to be fully effective, observe the following safety rules:
• Wear a correctly adjusted seat belt.
• Sit in a normal upright position (passengers must not place the ir feet on the fascia).
• Do not leave any accessories, objects or pets between the occupa nts and the air bags. It could hamper the operation
of the air bags or injure the occupants.
• All work on the air bag system is strictly forbidden unless it is ca rried out by an approved PEUGEOT dealer.
• After an accident or if the vehicle has been stolen or broken into, have the air bag systems checked.
• The air bag systems have been designed to be fully operation al for 10 years from the date of registration of the vehicle.
Have them replaced by a PEUGEOT dealer after this period.
Front air bags
• Do not drive holding the steering wheel by its spokes or resti ng your hands on the centre part of the wheel.
• Smoke as little as possible; deployment of the air bags can cau se burns or the risk of injury from a cigarette or pipe.
• Never remove or pierce the steering wheel or hit it violently.
Side air bags
• Do not fix or glue anything to the backs of the front seat s. This could cause injury to the chest or arms when the side
air bag inflates.
• Do not sit with the upper part of the body any nearer to the door than necessary.
• Only put approved covers on the seats. Contact your PEUGEOT deale r.
DRIVING YOUR 406 153
Page 140 of 174
29 07 2002
MAINTENANCE OF YOUR 406
34
CHANGING A WHEEL
Access to the spare wheel
and jack
Saloon:
lift the boot carpet using the
lifting hook. Secure the hook behind
the boot seal.
Estate: unscrew the two carpet
retaining screws a quarter turn using
the ignition key or a coin. Lift the car
pet and secure the retaining hook
behind the tailgate seal.
7 seater estate: fold back the third
row seat, then lift the carpet to gain
access to the spare wheel. Tools
1
Wheel brace.
2 Centralising tool.
3 Trim remover/wheel brace
extension.
4 Jack.
5 Removable towing eye.
6 Alloy wheel trim remover.
7 Trim cap tool.
The tool holder supports the boot
floor. Reposition it to prevent any
deformation of the floor when
loaded.
Tighten the spare wheel securing
strap to prevent noise and for your
safety in the event of a frontal
impact. Removal
Park the vehicle on level, stable
and non slippery ground.
Apply the handbrake, engage first or reverse gear (position Pfor the
automatic gearbox).
Remove the wheel trim using the wheelbrace by pulling next to the
valve. For vehicles fitted with alloy
wheels 8, remove the centre
trim by using tool 6in one of the
holes.
Loosen the wheel bolts.
For vehicles with alloy wheels 8,
remove the chrome trim caps before
hand (see page on 'special features
of alloy wheels' in this section).
Page 141 of 174
29 07 2002
MAINTENANCE OF YOUR 40635
The jack is fitted with a system
which enables it to be folded or
unfolded rapidly. Take the jack
from the toolkit and fold it by press
ing the ends A. Place the jack at
one of the locations Eunderneath
the vehicle (as close as possible to
the wheel to be changed) and
unfold it by pulling the ends A.
Extend the jack using the wheel brace 1and the extension 3.
Take out a wheel bolt at the top and fit the centralising tool 2.
Loosen the wheel bolts and remove the wheel. Fitting a wheel
Position the wheel using the cen
tralising tool to assist you.
Tighten the bolts by hand, and remove the centralising tool.
Partly tighten the bolts using the wheelbrace.
Fold the jack and remove it.
Fully tighten the wheel bolts using the wheelbrace.
Replace the wheel trim, except in the case of a space saver wheel,
by starting with the valve and
pressing on using the palm of your
hand. For your safety, always
change the wheel:
on level, stable, non slippery ground,
with the handbrake applied,
with first or reverse gear engaged (position Pfor the
automatic gearbox).
Never go underneath a vehicle which is supported only by a
jack (use a ramp).
After changing the wheel
have the tightening of the bolts and the tyre pressure checked
by a PEUGEOT dealer as soon
as possible,
have the punctured tyre repaired and refit it to the vehi
cle as soon as possible.
7 seater Estate model
The space saver spare wheel fit
ted with a 125/80R15 tyre must
only be used as a short term mea
sure. Tyre pressure is 61 lb in2
(4.2 bars), maximum speed is
50 mph (80 km/h).
Page 142 of 174
29 07 2002
MAINTENANCE OF YOUR 406
36
Anti theft bolts*
If your wheels are fitted with an anti
theft bolt (one per wheel), the
chrome trim and then the plastic
cover must be removed using tool 7,
before unscrewing the bolt using one
of the two anti theft sockets (which
were given to you on delivery of your
vehicle along with the duplicate keys
and the confidential card) and the
wheel brace 1.
Note: make a careful note of the
code number engraved on the head
of the anti theft socket. This will
enable you to obtain duplicate anti
theft sockets from a Peugeot dealer.
* According to model and destination
Special features of alloy
wheels
Bolt covers
Alloy wheel bolts are covered by
chrome trims.
Use tool
7to remove the trims before
slackening the bolts. Fitting the spare wheel
If your vehicle is fitted with a steel
spare wheel, when fitting it, it is
normal
to notice when tightening the
bolts that the washers do not come
into contact with the rim. The spare
wheel is secured by the cone shape
of each bolt.
Fitting snow tyres
If you fit snow tyres mounted on steel
wheels to your vehicle, it is essential
to use special bolts available from
your PEUGEOT dealer.
Page 143 of 174
29-07-2002
PETROL / LPG DUAL FUEL VERSION167
Puncture
Insulated storage compartment
This is located in the boot and con
tains:
the temporary tyre repair cans 1
(your 406 LPG does not have a
spare wheel),
the adaptors 2 necessary for
filling the LPG tank in some
countries,
the towing eye 3.
Fuses
The LPG functions are protected
by the two fuses Ain the fuse box
located in the engine compartment.
Using the repair cans
(Refer to the directions on the cans
also)
if possible, remove the object
which caused the puncture,
rotate the wheel so that the valve is in the same position as the
figures 2 or 10 on a clock,
shake the cans vigorously before use. In very cold weather, warm
the cans between your hands for
few minutes,
hold the valve with one hand and with the other press the injection
nozzle on the can firmly onto the
valve, holding it straight,
maintain the pressure firmly for one minute, carry out the same operation with
the second can, then drive imme
diately, at a moderate speed , to
the nearest garage.
The cans enable you to carry out
a temporary repair.
After use, the tyre must be
changed.
As the cans are pressurized, they
must not be exposed to a temper
ature above 50°C.
Store them away from heat in the
insulated storage compartment.
Page 152 of 174
29-07-2002
PETROL / LPG DUAL FUEL VERSION167
Puncture
Insulated storage compartment
This is located in the boot and con
tains:
the temporary tyre repair cans 1
(your 406 LPG does not have a
spare wheel),
the adaptors 2 necessary for
filling the LPG tank in some
countries,
the towing eye 3.
Fuses
The LPG functions are protected
by the two fuses Ain the fuse box
located in the engine compartment.
Using the repair cans
(Refer to the directions on the cans
also)
if possible, remove the object
which caused the puncture,
rotate the wheel so that the valve is in the same position as the
figures 2 or 10 on a clock,
shake the cans vigorously before use. In very cold weather, warm
the cans between your hands for
few minutes,
hold the valve with one hand and with the other press the injection
nozzle on the can firmly onto the
valve, holding it straight,
maintain the pressure firmly for one minute, carry out the same operation with
the second can, then drive imme
diately, at a moderate speed , to
the nearest garage.
The cans enable you to carry out
a temporary repair.
After use, the tyre must be
changed.
As the cans are pressurized, they
must not be exposed to a temper
ature above 50°C.
Store them away from heat in the
insulated storage compartment.
Page 154 of 174
Fuse N° RatingFunctions
1 shuntCentral air bag.
25 A Ventilation controls.
3 10 A Instrument panel.
45 A Ignition +ve signal for Built in Systems Interface.
5 Not used.
6 10 ASteering wheel stalk.
7 15 AAlarm siren.
8 10 ASatellite navigation system.
95 A Battery +ve signal for Built in Systems Interface.
10 15 A Audio equipment.
11 10 AThird brake light.
12 10 A Right hand brake light.
13 20 ADriver's electric window.
14 30 ARear window lift.
15 Battery +ve towing socket.
16 20 AMemorisation of seats.
17 20 APassenger's electric seat.
18 10 A Lighter lighting Display Lighting for switches and ash tray , automatic gearbox selector lever.
Fascia fuse box
MAINTENANCE OF YOUR 406
42
29 07 2002