2002.5 Peugeot 406 buttons

YOUR 406 IN DETAIL63
Button
Function
A ON VOL Radio on/off. Adjustment of volume.
B RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
CTATraffic information priority on/off.
D Press fully: cassette rewind.
EPress fully: cassette fast forward.
D+ E   Press halfway: reversal of direction of play of the cassette.
  Press fully: ejection of the cassette.
F Increasing the bass/treble setting.
G Decreasing the bass/treble setting.
H AUDIO Adjustment of bass, treble, loudness and sound distribution.
I SRC Source selection: radio, cassette or CD changer.
Press for more than 2 seconds: CD shuffle.
J Automatic search of higher frequency.
Selection of next CD track.
K Automatic search of lower frequency.
Selection of previous CD track.
L MAN
Manual/automatic operation of buttons Iand Jin radio mode.
M BND Selection of FM1, FM2, FMast and AM wavebands.
ASTPress for more than 2 seconds: storing of a station in the memory (au tostore).
1 to 6 12 34 56 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
Selection of a CD.
29-07-2002

29-07-2002
YOUR 406 IN DETAIL67
Manual station search Press the "MAN" button.
Briefly press button Jor Kto increase or decrease the frequency displayed.
By continuing to press the button in the direction selected, you will obtain contin
uous scrolling of the frequency.
The scrolling stops at the first station found as soon as the button is released.
Pressing the " MAN" button again returns you to automatic station search.
Manual storing of stations in the memory Select the station required.
Press one of the buttons "1" to " 6" for more than two seconds.
The sound stops then becomes audible again, confirming that the station has been stored in the memory.
Automatic storing of FM stations in the memory (autostore) Press button "BND/AST" for more than two seconds, to automatically store the 6 statio ns with the strongest
signal in FM. These stations are stored in the FMast waveband.
If it is not possible to find 6 stations, the remaining me mories are empty.
Recalling stations stored in the memory
For each waveband, briefly press buttons " 1" to " 6" to recall the corresponding station.

29-07-2002
YOUR 406 IN DETAIL69
CASSETTE
Selecting cassette mode When a cassette is inserted, the cassette player will start auto matically.
If a cassette is already inserted, press the " SRC" button until cassette mode is selected.
Ejecting the cassette
Fully press buttons Dand Eto eject the cassette from the player.
Direction of play The player will play sides 1 and 2 of the cassette alternate ly, by automatically reversing the direction of play
at the end of a side.
To manually reverse the direction of play, press buttons Dand Ehalfway.
Fast forward/rewind
Fully press button Dor Eto fast forward or rewind the cassette. At the end of the fa st forward/rewind, the set plays the cur
rent side.
Recommendations regarding the use of cassettes
Use good quality cassettes.
Do not use cassettes which play for more than 90 minutes.
Never expose the cassettes to heat or direct sunlight.
Retension the tape if necessary before inserting the cassette in the player.
Regularly clean the playing heads with a humid type cleani ng cassette.

29-07-2002
YOUR 406 IN DETAIL
70
CD CHANGER
Selecting CD changer mode Press the "SRC"button until CD changer mode is selected.
Selecting a disc Press buttons "1" to " 6" to select the corresponding disc.
Selecting a track Press button Jto select the next track.
Press button Kto return to the start of the current track or to select the previ ous
track.
Accelerated play
Press the " MAN" button.
Press and hold button Jor Kfor forwards or backwards accelerated play.
Accelerated play stops as soon as the button is released.
Buttons Jand Kresume the "track selection" function when the " MAN" button is pressed again.
Shuffle When the CD changer is selected, keep the " SRC" button pressed for two seconds. The tracks will be played
in random sequence. Pressing the " SRC" button again for two seconds returns you to normal play.

29-07-2002
ButtonFunction
A ON/VOL Radio on/off. Adjustment of volume.
B Radio selection. Selection of FM1, FM2, FMast and AM wavebands.
Press for more than 2 seconds: automatic storing of stations in the memory (autostore).
C Cassette selection. Reversal of the direction of play of the cassette.
Press for more than 2 seconds: noise reduction.
D CD changer selection.
Press for more than 2 seconds: shuffle.
EEjection of the cassette.
FT ATraffic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
G RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
H Increase bass/treble setting.
I Decrease bass/treble setting.
J AUDIO Adjustment of bass, treble, loudness ,sound distribution and
automatic volume correction.
K Automatic search of higher frequency.
Selection of next track cassette and CD.
L Automatic search of lower frequency.
Selection of previous track cassette and CD.
L MAN Manual/automatic operation of buttons Kand Lin radio mode.
1 to 6 12 34 56 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
Selection of a CD.
YOUR 406 IN DETAIL 73

Adjusting the bassWhen "BASS" is displayed, press button Hor Ito vary the setting.
"BASS –9" for a minimum bass setting,
"BASS 0" for a normal setting,
"BASS +9" for a maximum bass setting.
Adjusting the treble
When " TREB" is displayed, press button Hor Ito vary the setting.
"TREB –9" for a minimum treble setting,
"TREB 0" for a normal setting,
"TREB +9" for a maximum treble setting.
Adjusting the loudness
This function automatically emphasises bass and treble tones whe n the volume is low.
Press button Hor Ito switch the function on or off.
Adjusting the front/rear sound distribution (Fader)
When " FA D" is displayed, press button H or I.
Button Hincreases the volume in the front.
Button Iincreases the volume in the rear.
Adjusting the right/left sound distribution (Balance)
When "BAL" is displayed, press button Hor I.
Button Hincreases the volume on the righthand side.
Button Iincreases the volume on the lefthand side.
Automatic volume correction "CAV"
This function enables the volume to be automatically adapte d depending on the level of noise produced by the speed of the vehicle.
Press buttons Hor I to switch the function on or off.
YOUR 406 IN DETAIL 75
29-07-2002

29-07-2002
Manual station searchPress the "MAN" button.
Briefly press button Kor Lto increase or decrease the frequency displayed.
By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops at the first station found as soon as the button is released.
Pressing the " MAN" button again returns you to automatic station search.
Manual storing of stations in the memory Select the station required.
Press one of the buttons "1" to " 6" for more than two seconds.
The sound stops then becomes audible again, confirming that the station has been stored in the memory.
Automatic storing of FM stations in the memory (autostore) Press button B for more than two seconds, to automatically store the 6 station s with the strongest signal in
FM. These stations are stored in the FMast waveband.
If it is not possible to find 6 stations, the remaining me mories are empty.
Recalling stations stored in the memory
For each waveband, briefly press buttons " 1" to " 6" to recall the corresponding station.
The list of the 6 stations stored in memory on the waveband i s displayed each time one of the buttons "1" to " 6" is pressed.
YOUR 406 IN DETAIL 77

Regional following modeWhen they are part of a network, certain stations broadcast regi onal programmes in the various areas they
serve. With regional following mode you can keep listening t o the same programme.
Press the " RDS" button for more than two seconds to switch the function on or off.
PTY function This allows you to listen to stations broadcasting a specific t ype of programme (news, culture, sport, rock
etc.).
With FM selected, press the " TA" button for two seconds to switch this function on or off.
To search for a PTYprogramme:
select the PTYfunction,
briefly press button Kor Lto scroll down the list of the various types of pro
grammes offered.
when the programme of your choice is displayed, keep button Kor Lpressed for two seconds to carry out an automatic
search (after an automatic search the PTYfunction is switched off).
In PTY mode the different types of programmes can be stored in the
memory. To do this, press the preselection buttons " 1" to " 6" for more
than two seconds.
To recall the type of programme stored in the memory, briefly press
the corresponding button.
EON system
This connects stations which are part of the same network. It en ables the broadcast of traffic information by a station, which
is part of the same network as the station to which you are li stening.
This service is available when you have selected the TA traffic i nformation programme or the PTYfunction.
YOUR 406 IN DETAIL 79
29-07-2002