Page 126 of 372
5-15
EBU00485
Engine oil
Make sure the engine oil is at the specified lev-
el. Fill with oil as necessary. (See pages 8-15 ~
8-23 for details.)
-20°-10°0°10°20°30°40°50°C
5W/30
10W/30
10W/40
20W/50
15W/40
20W/40
Recommended oil:
Recommended engine oil classification:
API Service SE, SF, SG type or higher
Page 306 of 372
8-55
3. Refill with the same type of brake fluid.
Mixing fluids may result in a harmful
chemical reaction and lead to poor brake
performance.
4. Be careful that water does not enter the
master cylinder when refilling. Water will
significantly lower the boiling point of the
fluid and may result in vapor lock.
5. Brake fluid may deteriorate painted sur-
faces or plastic parts. Always clean up
spilled fluid immediately.
6. Have a Yamaha dealer check the cause if
the brake fluid level goes down.
Page 352 of 372
10-1
EBU00428
SPECIFICATIONS
Model YFM600FWA
Dimensions:
Overall length 2,068 mm
Overall width 1,161 mm
Overall height 1,215 mm
Seat height 865 mm
Wheelbase 1,254 mm
Minimum ground clearance 175 mm
Minimum turning radius 3,100 mm
Basic weight:
With oil and full fuel tank 290 kg
Engine:
Engine type Air-cooled 4-stroke, SOHC
Cylinder arrangement Forward-inclined single cylinder
Displacement 595 cm
3
Bore× stroke 95 × 84 mm
Compression ratio 8.5:1
Starting system Electric and recoil starter
Lubrication system Wet sump
Page 353 of 372
10-2
10
10
10
10
10
10
10
10
10
10
10
Engine oil:
Type-20°-10°0°10°20°30°40°50°C
5W/30
10W/30
10W/40
20W/50
20W/40
15W/40
Recommended engine oil classification: API Service SE, SF, SG type or higher
Quantity:
Periodic oil change
With oil filter replacement
Total amount1.9 L
2.0 L
2.6 L Model YFM600FWA
CAUTION:
Be sure to use motor oils that do not contain anti-
friction modifiers. Passenger car motor oils (often
labeled “Energy Conserving”) contain anti-friction
additives which will cause clutch and/or starter
clutch slippage, resulting in reduced component
life and poor engine performance.
Page 354 of 372
10-3
Final gear oil:
Type SAE 80 API “GL-4” Hypoid gear oil
Quantity
Periodic oil change 0.19 L
Total amount 0.22 L
Differential gear oil:
Type SAE 80 API “GL-4” Hypoid gear oil
Quantity
Periodic oil change 0.67 L
Total amount 0.70 L
Air filter: Wet type element
Fuel:
Type Regular gasoline
For Europe: Regular unleaded gasoline
For Oceania and South Africa: Unleaded fuel only
Fuel tank capacity 19 L
Fuel reserve amount 3 L
Carburetor:
Type/quantity BST 40/1
Manufacturer MIKUNIModel YFM600FWA
Page 356 of 372
10-5
Brake:
Front brake type Dual disc brake
operation Right hand operation
Rear brake type Drum brake
operation Left hand and right foot operation
Suspension:
Front suspension Strut
Rear suspension Swingarm (monocross)
Shock absorber:
Front shock absorber Coil spring / oil damper
Rear shock absorber Coil spring / oil damper
Wheel travel:
Front wheel travel 160 mm
Rear wheel travel 190 mm
Electrical:
Ignition system C.D.I.
Generator system C.D.I. magneto
Battery type YTX20L-BS
Battery voltage, capacity 12 V, 18 AH
Headlight type: Krypton bulbModel YFM600FWA