Page 288 of 372
8-37
Before installing the spark plug, measure the
electrode gap with a feeler gauge and adjust to
specification.
When installing the spark plug, always clean
the gasket surface and use a new gasket. Wipe
off any grime from the threads and tighten to
the specified torque.Spark plug gap:
0.8 ~ 0.9 mm
Tightening torque:
Spark plug:
17.5 Nm (1.75 m·kg)
a. Spark plug gap
a. Écartement des électrodes
a. Separación entre electrodos de la bujía
Page 324 of 372
8-73
EBU00739
Wheel installation
When installing the wheel, reverse the removal
procedure.
NOTE:
The arrow mark on the tire must point to-
ward the rotating direction of the wheel.
Tighten the wheel nuts to the specified torque.
Wheel nut torque:
Front: 55 Nm (5.5 m·kg)
Rear: 55 Nm (5.5 m·kg)
1. Arrow mark
1. Flèche
1. Marca en forma de flecha
Page 370 of 372
11-1
EBU00429
HOW TO USE THE CONVERSION TABLE
All specification data in this manual are listed
in SI and METRIC UNITS.
Use this table to convert METRIC unit data to
IMPERIAL unit data.
Ex.
CONVERSION TABLE
METRIC MULTIPLIER IMPERIAL
**mm
× 0.03937 = **in
2 mm
× 0.03937 = 0.08 in
METRIC TO IMPERIAL
Metric unit Multiplier Imperial unit
Torquem·kg
m·kg
cm·kg
cm·kg7.233
86.794
0.0723
0.8679ft·lb
in·lb
ft·lb
in·lb
Weightkg
g2.205
0.03527lb
oz
Speed km/hr 0.6214 mph
Distancekm
m
m
cm
mm0.6214
3.281
1.094
0.3937
0.03937mi
ft
yd
in
in
Volume /
Capacitycc (cm
3)
cc (cm3)
lt (liter)
lt (liter)0.03527
0.06102
0.8799
0.2199oz (IMP liq.)
cu·in
qt (IMP liq.)
gal (IMP liq.)
Misc.kg/mm
kg/cm
2
Centigrade
(°C)55.997
14.2234
9/5 + 32 lb/in
psi (lb/in
2)
Fahrenheit (°F)