2001 YAMAHA YFM400F parking brake

6-21
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-6.frame
EL
EBU00676
Parking on a slope
WARNING
Avoid parking on hills or other inclines. Park-
ing on a hill or other incline could cause the
ATV to roll out of control, increasing the
chance of an accident. If you must park on an
incline, place the machine transversely across
the incline, apply the parking brake, and block
the front and rear wheels with rocks or other
objects. Do not park the ATV at all on hills that
are so steep you could not walk up them easi-ly.
1. Bring the machine to a stop by applying
the brakes.
2. Stop the engine.
3. With the rear brake applied, shift the drive
select lever to the park position.

7-35
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-7.frame
EL
Select a large, flat area off-road to become fa-
miliar with your ATV. Make sure that this area
is free of obstacles and other riders. You
should practice control of the throttle, brakes,
shifting procedures, and turning techniques in
this area before trying more difficult terrain. Al-
ways avoid riding on paved surfaces: the ATV
is designed for off-road use only, and handling
maneuvers are more difficult to perform on
pavement.
Set the parking brake and follow the instruc-
tion on page 6-3 to start the engine. Once it has
warmed up you are ready to begin riding your
ATV. As you get on the ATV, be sure not to ac-
cidentally move the shift pedal. Remember
that the engine and exhaust pipe will be hot
when riding and afterwards; do not allow skin
or clothing to come in contact with these com-
ponents.

7-37
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-7.frame
EL
With the engine idling, shift the drive select le-
ver into low or high. Then release the parking
brake. Apply the throttle slowly and smoothly.
The centrifugal clutch will engage and you will
start to accelerate. If the throttle is applied too
abruptly, the front wheels may lift off the
ground resulting in a loss of directional con-
trol. Avoid higher speeds until you are thor-
oughly familiar with the operation of your ATV.
When slowing down or stopping, release the
throttle and apply the brakes smoothly and
evenly. Improper use of the brakes can cause
the tires to lose traction, reducing control and
increasing the possibility of an accident.CAUTION:Do not shift from low to high or vice versa
without coming to a complete stop. Damageto the engine or drive train may occur.

7-53
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-7.frame
EL
WARNING
Use proper gear and maintain steady speed
when climbing a hill.
If you lose all forward speed:l
Keep weight uphill.
l
Apply the brakes.
l
Shift into the parking position, after you
are stopped.
If you begin rolling backwards:
l
Keep weight uphill.
l
2WD: Never apply the rear brake while
rolling backwards. Apply the front brake.
4WD: Apply both front and rear brakes
gradually.
When fully stopped, shift into the parking
position.
Dismount on uphill side or to a side if pointed
straight uphill. Turn the ATV around and re-
mount, following the procedure described in
the Owner’s Manual.