Page 354 of 426
8-97
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-8.frame
EL
EBU00681
Front brake adjustment
The front brake lever should have a free play of
zero mm at the lever end. If not, ask a Yamaha
dealer to adjust it.
WARNING
Operating with improperly serviced or adjust-
ed brakes could cause loss of braking ability
which could lead to an accident.
After servicing:l
Make sure the brakes operate smoothly
and that the free play is correct.
l
Make sure the brakes do not drag.
l
Make sure the brakes are not spongy. All
air must be bled from the brake system.
Replacement of brake components requires
professional knowledge. These procedures
should be performed by a Yamaha dealer.
a. Free play
a. Jeu
a. Juego libre
Page 356 of 426
8-99
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-8.frame
EL
EBU00689
Rear brake lever adjustment
The rear brake lever free play should be 0.5 ~
2 mm.
1. Loosen the locknut.
2. Turn the adjusting bolt in direction a to
increase free play, and in direction b to
decrease free play.
3. Tighten the locknut.
If correct free play cannot be obtained, ask a
Yamaha dealer to make that adjustment.
Rear brake pedal height adjustmentNOTE:Adjust the rear brake before inspecting the rearbrake pads.
The top of the brake pedal should be posi-
tioned 53 ~ 60 mm above the top of the foot-
rest. If not, ask a Yamaha dealer to adjust it.
1. Locknut 2. Adjusting bolt
c. Free play
1. Contre-écrou 2. Boulon de réglage
c. Jeu
1. Contratuerca 2. Perno de ajuste
c. Juego librea. 53 ~ 60 mm
Page 358 of 426
8-101
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-8.frame
EL
WARNING
Operating with improperly serviced or adjust-
ed brakes could cause loss of braking ability
which could lead to an accident.
After servicing:l
Make sure the brakes operate smoothly
and that the free play is correct.
l
Make sure the brakes do not drag.
l
All air must be bled from the brake sys-
tem.
Replacement of brake components requires
professional knowledge. These procedures
should be performed by a Yamaha dealer.
Page 362 of 426
8-105
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-8.frame
EL
EBU00717
Brake lever and brake pedal lubrication
Lubricate the pivoting parts.
Recommended lubricant:
Lithium-soap-based grease
(all-purpose grease)
Page 396 of 426
9-3
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-9.frame
EL
CAUTION:
Excessive water pressure may cause water
seepage and deterioration of wheel bearings,
brakes, transmission seals and electrical de-
vices. Many expensive repair bills have result-
ed from improper high pressure detergent
applications such as those available in coin-
operated car washers.
4. Once the majority of the dirt has been
hosed off, wash all surfaces with warm
water and mild, detergent-type soap. An
old toothbrush or bottle brush is handy
for hard-to-get-at places.
5. Rinse the machine off immediately with
clean water and dry all surfaces with a
chamois, clean towel or soft absorbent
cloth.
6. Clean the seat with a vinyl upholstery
cleaner to keep the cover pliable and
glossy.
Page 398 of 426
9-5
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-9.frame
EL
7. Automotive type wax may be applied to
all painted and chrome plated surfaces.
Avoid combination cleaner-waxes. Many
contain abrasives which may mar the
paint or protective finish.
When finished, start the engine and let it
idle for several minutes.
WARNING
Wet brakes may have reduced stopping abili-
ty, increasing the chance of an accident. Test
the brakes after washing. Apply the brakes
several times at slow speeds to let friction dry
out the linings.
Page 408 of 426
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600SPEC-
EL
10-5
Brake:
Front brake type Dual disc brake
operation Right hand operation
Rear brake type Single disk brake
operation Left hand and right foot operation
Suspension:
Front suspension Double wishbone
Rear suspension Swingarm (monocross)
Shock absorber:
Front shock absorber Coil spring / oil damper
Rear shock absorber Coil spring / oil damper
Wheel travel:
Front wheel travel 160 mm
Rear wheel travel 180 mm
Electrical:
Ignition system DC-C.D.I.
Generator system A.C. magneto
Battery type YTX20L-BS
Battery voltage, capacity 12 V, 18 AH
Headlight type: Krypton bulbModel YFM400FA / YFM400FWAN