2001 YAMAHA XVS125 suspension

INSTRUMENT AND CONTROL FUNCTIONS
3
3-9
EAU00260
Helmet holderTo open the helmet holder, insert the
key into the lock, and then turn the
key as shown.
To lock the helmet holder, place it in
the original position, and then remove
the key.
EW000030
wNever ride with a helmet attached
to the helmet holder, since the hel-
met may hit objects, causing loss
of control and possibly an acci-
dent.1.Helmet holder
aOpen.
1
a
EW000040
wAlways adjust both shock
absorber assemblies equally, oth-
erwise poor handling and loss of
stability may result. Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring on each shock
absorber assembly in direction a. To
decrease the spring preload and
thereby soften the suspension, turn
the adjusting ring on each shock
absorber assembly in direction b.NOTE:
Align the appropriate notch in the
adjusting ring with the position indica-
tor on the shock absorber.
EAU00300
Adjusting the shock
absorber assembliesEach shock absorber assembly is
equipped with a spring preload
adjusting ring.
EC000015
cCNever attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.1.Shock absorber spring preload
adjusting ring
2.Position indicator
1
2
3
4
5
b
a
2
1
Setting
Minimum (soft)1
Standard2
Maximum (hard)5
5JX-9-E1 9/27/00 10:45 AM Page 19

PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
56
7
8
9
6-16
EWA00012
wBecause loading has an enormous
impact on the handling, braking,
performance and safety character-
istics of your motorcycle, you
should keep the following precau-
tions in mind.
8NEVER OVERLOAD THE
MOTORCYCLE! Operation of
an overloaded motorcycle may
result in tire damage, loss of
control, or severe injury. Make
sure that the total weight of
rider, passenger, cargo, and
accessories does not exceed
the specified maximum load
for the vehicle.
8Do not carry along loosely
packed items, which can shift
during a ride.
8Securely pack the heaviest
items close to the center of the
motorcycle and distribute the
weight evenly on both sides.8Adjust the suspension and tire
air pressure with regard to the
load.
8Check the tire condition and
air pressure before each ride.
Tire air pressure
(measured on cold tires)
Load*FrontRear
Up to 90 kg
175 kPa
(1.75 kg/cm
2,
1.75 bar)200 kPa
(2.00 kg/cm
2,
2.00 bar)
90 kgÐmaximum
225 kPa
(2.25 kg/cm
2,
2.25 bar)225 kPa
(2.25 kg/cm
2,
2.25 bar)
Maximum load*183 kg
*Total weight of rider, passenger, cargo and
accessories
5JX-9-E1 9/27/00 10:45 AM Page 45

SPECIFICATIONS
8-3
8
Maximum load*183 kg
Air pressure (cold tire)
up to 90 kg load*
Front
175 kPa (1.75 kg/cm
2, 1.75 bar)
Rear
200 kPa (2.00 kg/cm
2, 2.00 bar)
90 kg loadÐmaximum
load*
Front
225 kPa (2.25 kg/cm
2, 2.25 bar)
Rear
225 kPa (2.25 kg/cm
2, 2.25 bar)
*Total weight of rider, passenger, cargo and accessories
Wheels
Front
TypeSpoke wheel
Size18 ´1.60
Rear
TypeSpoke wheel
Size15 M/C ´MT 3.00
Brakes
Front
TypeSingle disc brake
OperationRight hand
FluidDOT 4Rear
TypeDrum brake
OperationRight foot
Suspension
Front
TypeTelescopic fork
Rear
TypeSwingarm
Shock absorber/spring
Front
TypeCoil spring / oil damper
Rear
TypeCoil spring / oil damper
Wheel travel
Front140 mm
Rear100 mm
Electrical system
Ignition systemTransistorized coil ignition
(digital)
Charging system
TypeA.C. magneto
Standard output14 V, 23 A @ 5,000 r/min
5JX-9-E1 9/27/00 10:45 AM Page 79