6-34
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
56
7
8
9
2
1
2
1
1.Headlight coupler
2.Headlight bulb cover
EAU01079
Replacing a headlight bulbThis motorcycle is equipped with
quartz bulb headlights. If a headlight
bulb burns out, replace it as follows.
1.Remove cowling A. (See page
6-6 for cowling removal and
installation procedures.)
2.Disconnect the headlight cou-
pler, and then remove the head-
light bulb cover.
3.Remove the headlight bulb hold-
er according to the following
illustration, and then remove the
defective bulb.
NOTE:
The removal procedure depends on
the type of bulb holder installed on
your motorcycle.
EW000119
wHeadlight bulbs get very hot.
Therefore, keep flammable prod-
ucts away from a lit headlight bulb,
and do not touch the bulb until it
has cooled down.4.Place a new bulb into position,
and then secure it with the bulb
holder.TypeType
TypeType Turn
Unhook
UnhookTurn
EC000103
cCDo not use a fuse of a higher
amperage rating than recommend-
ed to avoid causing extensive
damage to the electrical system
and possibly a fire.3.Turn the key to ÒONÓ and turn on
the electrical circuits to check if
the devices operate.
4.If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
5AE-9-E4 (ENG) 8/30/00 5:04 PM Page 69
